Duratech DFC-039 Manual
  1. Manuals
  2. Brands
  3. Duratech Manuals
  4. Swimming Pool Filter
  5. DFC-039
  6. Manual

Duratech DFC-039 Manual

Flow cartridge filter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Manual
DFC-039
DFC-049
FLOW Cartridge Filter
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DFC-039 and is the answer not in the manual?

Questions and answers

Summary of Contents for Duratech DFC-039

  • Page 1 Manual DFC-039 DFC-049 FLOW Cartridge Filter...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS FILTER SPECIFICATIONS PACKAGING CONTENTS SPARE PARTS LIST SAFETY INSTRUCTIONS GENERAL INFORMATION INSTALLATION STARTING THE PUMP AND FILTER SYSTEM 5.2.1 Before Starting The Pump 5.2.2 Starting The Pump OPERATION FILTERING MAINTAINING YOUR FILTER 6.2.1 Filter Disassembly Instructions 6.2.2 Removing The Cartridges 6.2.3 Cleaning The Cartridges...

  • Page 5: Filter Specifications

    APPROVED FOR FRESH OR SALT WATER 1. FILTER SPECIFICATIONS EFFECTIVE FILTRATION RATE DESIGN FLOWRATE NET. WEIGHT MODEL NO. M² FT² M³/H DFI - 039 39,5 DFI - 049 48,8 MAXIMUM WORKING PRESSURE FOR ALL MODELS = 3,45 BAR (50 PSI) ATTENTION INSTALLER: THIS MANUAL CONTAINS IMPORTANT INFORMATION OF THE OPERATION AND SAFE USE OF THE EQUIPMENT.

  • Page 6: Packaging Contents

    2. PACKAGING CONTENTS Item No. Part Description Qty. Pressure Gauge Manual Air Relief Valve Upper Filter Body for DFC-039 Upper Filter Body for DFC-049 Clamp System including: Clamp, Clamp Nut and Bolt, Hang Tag, Metal Reinforced Seal and Labels O-Ring...

  • Page 7: Spare Parts List

    SP_DFC-003 Pressure Gauge SP_DFC-004 Manual Air Relief Valve SP_DFC-005 Clamp Nut and Bolt SP_DFC-006 O-Ring SP_DFC-001 Cartridge Element for DFC-039 SP_DFC-002 Cartridge Element for DFC-049 SP_DFC-007 1 ½” Drain Plug with O-Ring O-Ring SP_DFC-008 Bulkhead Fitting Union Connection Kit (63mm)

  • Page 8: Safety Instructions

    4. SAFETY INSTRUCTIONS READ, UNDERSTAND AND FOLLOW ALL SAFETY AND OPERATION INSTRUCTIONS! FAILURE TO FOLLOW SAFETY AND OPERATION INSTRUCTIONS CAN RESULT IN SEVERE PERSONAL INJURY OR DEATH. ____This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for one of the following signal words and be alert to the potential for personal injury or death.
  • Page 9 TO AVOID COMPONENT SEPARATION Follow all safety and operation instructions. Do not operate the water circulation system if a system component is assembled improperly, damaged, missing, or not a genuine component. Before performing maintenance on the water circulation system, verify all system and pump controls are in OFF position and the filter manual air relief valve is in the OPEN position.
  • Page 10 ____WARNING ELECTROCUTION HAZARD High Voltage electricity is present in the pool and spa equipment. High voltage electricity can cause shock and electrocution. Shock and electrocution can result in severe personal injury or death. All electrical wiring MUST be in conformance with applicable local codes and regulations.

  • Page 11: General Information

    5. GENERAL INFORMATION The ‘Cartridge Filter’ combines superior water filtration with ease of operation and totally corrosion-resistant construction. With filtration ratings to 34,000 liters (9000 gallons ) per hour, they are designed for continuous or intermittent operation, for installation above or below the pool water line, for fresh or salt water swimming pools or spa’s.

  • Page 12: Installation

    Clamp Nut to Clamp Bolt to 17Nm (150 inch-lbs). (See Fig 5) Verify that the Filter Manual Air Relief Body is in the LOCK position, and no filter components are missing, damaged or not genuine DuraTech components. (See Fig 4) Close filter drain.

  • Page 13: Starting The Pump

    5.2.2 Starting The Pump When starting system pump, do not stand over or near filter. If water leakage appears at filter tank clamp, immediately turn off all system circulation pumps and all electrical power. Do not return to the filter until all water leakage has stopped. Reassemble the Clamp System per the instructions on page 17 in this manual to stop leak.

  • Page 14: Operation

    6. OPERATION 6.1 FILTERING ____WARNING Filtration starts as soon as flow is steady through the filter. As the filter removes dirt from the pool water, the accumulated dirt causes a resistance to flow. As a result, the gauge pressure will rise and the flow will decrease. When the pressure rises between 0,49 - 0,69 bar (7 and 10 psi) above the starting pressure, or when the flow decreases below the desired rate, clean or replace the filter cartridge elements.

  • Page 15: Maintaining Your Filter

    6.2 MAINTAINING YOUR FILTER ____This product should be installed and serviced only by a qualified pool professional. ____WARNING 6.2.1 Filter Disassembly Instructions Turn off all system circulation pumps and all electric power on the equipment pad. Set all system valves in a position to prevent water flow to the filter. The Manual Air Relief Valve must be placed in the OPEN position.

  • Page 16: Removing The Cartridges

    6.2.2 Removing The Cartridges Remove the top Manifold, which is exposed when the upper Filter Body is removed. (See Fig 3) Remove the Filter Cartridge Elements by using slight rocking motion and lifting up. Clean Filter Cartridge Elements. 6.2.3 Cleaning The Cartridges The Cartridge Filter Element can be cleaned by washing inside and outside with a garden hose.

  • Page 17: Body And Clamp Re-Assembly

    Clamp Bolt Align the Labels Clamp Body Clamp Nut Figure 10 Align the Labels Lower Filter Body Drain Plug Figure 9 Figure 11...
  • Page 18 6.3.3 Body and Clamp Re-Assembly Reposition the Upper Filter Body on the Lower Filter Body and press down the Upper Filter Body against the sealing. Verify that there is an even gap between the Lower and Upper Filter Body. If the gap is not even, then reposition the Upper Filter Body again.

  • Page 19: Removing The Manual Air Relief Valve

    7. THE MANUAL AIR RELIEF VALVE 7.1 REMOVING THE MANUAL AIR RELIEF VALVE ____This product should be installed and serviced only by a qualified pool professional. ____WARNING Your Filter comes with a Manual Air Relief Valve (MAR) preinstalled rom the factory. For Qualified pool professionals only: If MAR valve needs to be serviced, follow these instructions carefully.

  • Page 20: Winterizing Filter

    8. WINTERIZING FILTER ____This product should be installed and serviced only by a qualified pool professional. ____WARNING ____In areas where subfreezing temperatures can be expected, the filter should be ____drained to protect the filter from damage. The filter should be disassembled and the Filter Cartridges Elements cleaned or replaced.

  • Page 21: Leaking Of The Clamp

    9.4 LEAKING OF THE CLAMP Follow the Filter Disassembly Instructions. (See Chapter: 6.2.1 - Page 15) Clean the Sealing Ring and Seal Surface. (See Chapter: 6.3.2 - Page 16) Verify for any damages to the Sealing Surface of the Upper and Lower Filter Body and the O-Ring.
  • Page 24 HEAT Accessories VISION Specials Contact details Propulsion Systems bvba Dooren 72 1785 Merchtem, Belgium Tel +32 2 461 02 53 www.duratech.be info@propulsionsystems.be We reserve the rights to change all or part of the contents of this document without prior notice...

This manual is also suitable for:

Dfc-049

Table of Contents