僅 Checking Tire Inflation Pressure - Kia Sportage 2023 Owner's Manual

Hide thumbs Also See for Sportage 2023:
Table of Contents

Advertisement

Maintenance
to observe this precaution, you may
be driving on underinflated tires,
which may not only compromise
your vehicle's driving stability, but
may also lead to tire damage and
the risk of an accident. This risk is
much higher on hot days and when
driving for long periods at high
speeds.
Failure to maintain specified pres-
sure may result in excessive wear,
poor handling, reduced fuel econ-
omy, deformation of tire and/or
wheel, harsh ride conditions, possi-
bility for additional damage from
road hazards, or result in tire failure.
Tire pressure
Always observe the following:
僅 Check tire pressure when the tires
are cold. (After vehicle has been
parked for at least three hours or
hasn't been driven more than 1
mile (1.6 km) since startup.)
僅 Check the pressure of your spare
tire each time you check the pres-
sure of other tires. (if equipped)
僅 Never overload your vehicle. Be
careful not to overload a vehicle
luggage rack if your vehicle is
equipped with one.
僅 Warm tires normally exceed rec-
ommended cold tire pressures by
4 ~ 6 psi (28 ~ 41 kPa). Do not
release air from warm tires to
adjust the pressure or the tires will
be underinflated.
7
28
WARNING
Tire Inflation
Overinflation or underinflation can
reduce tire life, adversely affect
vehicle handling, and lead to sudden
tire failure. This could result in loss
of vehicle control and potential
injury.
Checking tire inflation pressure
Check your tires once a month or
more.
Use a good quality gauge to check
tire pressure. You cannot tell if your
tires are properly inflated simply by
looking at them. Radial tires may
look properly inflated even when
they're underinflated.
Check the tire's inflation pressure
when the tires are cold. "Cold"
means your vehicle has been sitting
or at least three hours or driven no
more than 1 mile (1.6 km).
1. Remove the valve cap from the
tire valve stem.
2. Press the tire gauge firmly onto
the valve to get a pressure mea-
surement. If the cold tire inflation
pressure matches the proper
pressure on the tire and loading
information label, no further
adjustment is necessary.
3. If the pressure is low, add air until
you reach the recommended
amount.
4. If you overfill the tire, release air
by pushing on the metal stem in
the center of the tire valve.
Tires and wheels

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents