Download Print this page

How To Use; Getting Started - PowerXL SP0010-2BPTV Use & Care Manual

Electric salt and pepper grinder set

Advertisement

How to Use

This appliance is for household use only.

GETTING STARTED

Remove all packing materials and any stickers.
To register your product, go to www.prodprotect.com/powerxl.
Clean all parts as instructed in CARE and MAINTENANCE section.
PARTS
1.
Switch
2.
Battery compartment
3.
Batteries 4 x AA (not included)
4.
Motor unit
5.
Spindle
6.
Viewing window
DISMANTLING
Grip around the body of the motor unit and clear viewing window.
Turn the cover to move the pointer from lock
Lift the motor unit off the grinder.
Remove the battery compartment by grasping around the motor unit top and body
and turning to move the pointer from lock
INSERT BATTERIES
For maximum performance, always use good quality batteries.
Fit 4 AA batteries (not included) into each motor unit.
The polarities ("+" and "-") are marked on the battery compartment.
FILL THE GRINDERS
Ensure you are using grinder quality seasoning.
Fill the grinders with peppercorns, sea salt, dried herbs or spices.
Do not overfill; this will cause problems during reassembly.
ASSEMBLING
Refit the motor unit to the grinder by aligning the pointer with the unlock
clear viewing window.
Rotate the motor unit moving it into the lock
Refit the battery compartment by aligning the pointer with the unlock
motor unit. Rotate the battery compartment moving it into the lock
ADJUST THE GRIND
Tip the whole mill upside down and turn the grinder clockwise towards the negative
for a finer grind.
NOTE: Grind will become progressively finer as you rotate the grinder.
Tip the mill the right way up and press the switch.
Check the grind size and if required, readjust to suit by turning the grinder counter-
clockwise towards the positive
NOTE: Do not turn the knob more than 6 complete rotations clockwise towards the "+". This
may unscrew the knob from the spindle.
Do the same for the other mill.
SP0010-2BPTV_29626_E_IB_A.indd 5
SP0010-2BPTV_29626_E_IB_A.indd 5
7.
Grinder
8.
Bulb connection points
9.
Brass connection pins
10. LED Light (not pictured)
11. Clear coasters (not pictured)
to unlock .
to unlock .
position.
.
5
on the
on the
position.
1/5/23 3:44 PM
1/5/23 3:44 PM

Advertisement

loading