Advertisement
Quick Links
Depot2U
Last update: 07/10/2021
HW
Power operations:
To switch on the LCD screen, press and hold the power button for two seconds.
When the display lights up, it is ready to use.
Button
Short press to increase level
of pedal assistance.
Long press to cycle through
upper display menu.
Short press to decrease
level of pedal assistance.
Long press to activate
(brake to disengage walking
Short press to cycle through
lower display menu.
Long press to Power
Short press to activate front
Long press to activate
(brake to disengage walking
Function
walking assist.
assist)
ON / OFF
light.
walking assist.
assist)
Advertisement
Summary of Contents for DEPOT 2 U 99054
- Page 1 Depot2U Last update: 07/10/2021 Button Function Short press to increase level of pedal assistance. Long press to cycle through upper display menu. Short press to decrease level of pedal assistance. Long press to activate walking assist. (brake to disengage walking assist) Short press to cycle through lower display menu.
- Page 2 Depot2U Last update: 07/10/2021 Upper Display Menu: The upper display menu is responsible for showing you speed. The default setting is current speed. Long press the S+ button to change between current speed, max speed recorded and average speed. When the bike is switched off, the values will reset to 0 for your next trip. Lower Display Menu: The lower display menu is responsible for showing you overall milage recorded on the bike (odometer), current trip milage, current battery voltage, output current to motor and the...
- Page 3 Depot2U Last update: 07/10/2021 1. Battery Charging & Locking The battery can be charged on or off the Bike. The battery lock has three positions, ON, OFF & UNLOCK. To remove the battery, turn the key anti-clockwise to the unlock position. Remove the battery by using folding handle on top of the battery and sliding up the guide rail.
- Page 4 Depot2U Last update: 07/10/2021 ...
- Page 5 Depot2U Last update: 07/10/2021 TURN LEFT Key in 12 o’clock position means the battery is To turn battery off, turn the key switched on. The battery must be switched on to anticlockwise / left until it clicks. turn the bike on, which is done on the control pad by pressing and holding the power button.
Need help?
Do you have a question about the 99054 and is the answer not in the manual?
Questions and answers