Table of Contents
Advertisement
Quick Links
(A) FEATURES
PM200 is a multi-function watch designed to have Chronograph, Count Down Timer, Alarm and
Heart Rate Monitor. The main features are listed as follow:
6 modes operation: Normal Time, Heart Rate Monitor, Chronograph, Timer, Alarm and Safety
Range Set.
Normal Time presents Hour, Minute, Second, Weekday, Month and Date.
12/24 Hr display format.
Heart rate monitor with "Safety Range" and "Warning Sound".
1/100 second Chronograph with split function up to 100 hours.
20 seconds daily alarm.
Hourly chime signal.
1 second resolution Count Down Timer with working range from 1 minute to 19 hours 59
minutes. User option for Count Down Stop, Count Down Repeat and Count Down Up function.
3 seconds light up EL back light.
(B) EL BACK LIGHT
Press button S1 for EL back light with 3 seconds auto light up.
(C) BASIC OPERATION OF BUTTONS
S1: - EL BACK LIGHT
- START/STOP OF CHRONOGRAPH
- TIMER START/STOP
- ADVANCE SETTING DIGITS (SET)
S2: - SPLIT/RESET OF CHRONOGRAPH
- RELOAD PRESET TIMER TIME (TIMER STOPPED)
- SELECT TIMER FUNCTION (TIMER RELOADED/RESET)
- ALARM AND CHIME ARM /DISARM
- TOGGLE "AGE" & "SAFETY RANGE" DISPLAY
S3: - MODE CHANGE
- SELECT SETTING DIGITS (SET)
S4: - SET (PRESS & HOLD)
S4
S1
S3
S2
S4
S3
S1
S2
Advertisement
Table of Contents
Related Manuals for Oregon Scientific PM200
Summary of Contents for Oregon Scientific PM200
- Page 1 (A) FEATURES PM200 is a multi-function watch designed to have Chronograph, Count Down Timer, Alarm and Heart Rate Monitor. The main features are listed as follow: 6 modes operation: Normal Time, Heart Rate Monitor, Chronograph, Timer, Alarm and Safety Range Set.
- Page 2 - ENTER/EXIT HEART RATE MONITOR MODE - EXIT SET (SET) (D) MODE CHANGE OPERATION Press button S3 for mode change operation. The sequence is shown as follow: NORMAL TIME CHRONOGRAPH TIMER ALARM SAFETY RANGE SET (E) HOW TO SET NORMAL TIME Press button S3 to show Normal Time mode, weekday displayed in the bracket.
- Page 3 2. If 24 Hr display format is selected, there is no AM flag “A” or PM flag “P”. 3. If there is no button operation for 2-3 minutes in setting mode, the watch will return back to Normal Time mode automatically. 4.
- Page 4 3. If there is no button operation for 2-3 minutes in setting mode, the watch will return back to Timer mode automatically. 4. Button S1 is for starting or stopping the timer. 5. Button S2 is for reloading preset timer time when timer is stopped, or selecting timer function when the timer is reloaded or reset.
- Page 5 Press button S3 to show Safety Range Set mode, “HI” displayed in the bracket. Press & hold button S4 for 3-4 seconds to enter setting mode. The lower limit “LO” digit start flashing. With each press of button S1, the selected digits, warning sound on/off to be adjusted (flashing) can be made.
- Page 6 In Normal Time, Chronograph or Timer mode press button S4 to enter Heart Rate Monitor mode, “Hr” displayed in the bracket. The watch will then responses to the signal emitted by the transmitter and display the current heart rate (b.p.m.) in the upper row of the display, next to the bracket. Remark: 1.
Need help?
Do you have a question about the PM200 and is the answer not in the manual?
Questions and answers