About this Practice:
This practice has been reissued to:
• Update Ordering Information
section.
• Add note to General Description
section on the difference between
a -01 and a -02.
Reissued Practices: Updated and
new content can be identified by a
banner in the right margin.
Issue date: October 1998
Copyright 1998 by Dantel, Inc. • Dantel is a registered trademark of Dantel, Inc. • ISO 9001 Registered
E-S
YSTEM
Table of Contents
General Description .............................................................................. 2
Circuit Description ............................................................................... 3
Installation ............................................................................................ 5
Operation ............................................................................................ 11
Warranty ............................................................................................. 48
CAUTION
•
Install or remove modules from the shelf only when the power is off.
If you install a module in the shelf with the power on, the internal
circuitry may suffer damage and the product warranty will be void.
•
Remove and install circuit boards only in a static-safe environment
(use antistatic wrist straps, smocks, footwear, etc.).
•
Keep circuit boards in their antistatic bags when they are not in use.
•
Do not ship or store circuit boards near strong electrostatic, electromag-
netic, magnetic, or radioactive fields.
•
For more complete information on electrostatic discharge safety
precautions, refer to Bellcore
Printed in the U.S.A.
I
NSTALLATION
46033
A
DAPTER
46033-XX
E-SYS
ADAPTER
XMT
CARRIER TEST
NORMAL
RCV
DATA
XMT
A1146033-00 REV__
TM
Technical Reference # TR-NWT-000870.
& O
M
PERATION
ANUAL
46033-1098 <90-00011>
Need help?
Do you have a question about the 46033 and is the answer not in the manual?
Questions and answers