Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for KAMEP T8
- Page 1 Video Doorbell User Manual...
-
Page 3: Table Of Contents
E-mail. We will solve your problems within 24 hours. Besides, your advice or suggestions will be much appreciated and welcomed. Product Service Email:support@kamep.cc INDEX Ⅰ. Features·················································································1 Ⅱ. In the Box··············································································2 Ⅲ. Charge batteries·································································3 Ⅳ. -
Page 4: Ⅰ. Features
Ⅰ. Features 1. Motion Sensor 5. Microphone 2. Wide-angle Lens 6. Doorbell Button 3. Hidden Infrared Lights 7. Indicator Lights 4. Light Sensor 8. Speaker 9. Micro USB Port (Battery Charging) -
Page 5: Ⅱ. In The Box
Indicator Light Indicator light flashing RED The device is reconnecting to the Wifi network. Please wait. Indicator light flashing RED and BLUE alternately Low battery. Please recharge your batteries. Ⅱ. In the box Video Doorbell Back Plate 2 Anchors Video Doorbell 2 Screws User Manual... -
Page 6: Ⅲ. Charge Batteries
Ⅲ. Charge batteries 1. Remove the battery tab. 2. Insert 18650 batteries positive end facing down, as shown on the device. Rechargeable 18650 Battery 3. Fully charge batteries by connecting your device to a USB charger using a Micro USB cable. It takes about 14 hours for batteries to fully charge. -
Page 7: Ⅳ. Set Up Your Video Doorbell
Ⅳ. Set up your Video Doorbell Connect your phone with the same 2.4 G Wi-Fi network you are to connect your camera to. The camera only works with 2.4G Wi-Fi, does not support 5G. 2.4G ONLY Scan the QR codes below or search for Aiwit on the Apple app store or Google Play to download the app. - Page 8 You will receive an email Enter your email and with the confirmation password , then tap Log in. code . Please enter the code and tap Confirm. Tap +. Tap Doorbell Scan and select video doorbell.
- Page 9 Press and hold the device Tap Yes button for 8 seconds until the light is flashing red. Tap Next. Name your doorbell. Find Scan the QR code using or enter the name of your the doorbell camera . Keep Wifi network and enter devices 4 inches (10 cm) the Wifi password.
-
Page 10: Ⅴ. App Introduction
If pairing is successful , After setup , tap the Live you Will See a message View in the Aiwit app to as below. see live video from your doorbell Ⅴ. App introduction tammyguan@gmail.com... - Page 11 JAHDD North America/New York tammyguan@gma il.com...
-
Page 13: Ⅵ. Storage Methods
Ⅵ. Storage Methods : Cloud Storage A.Each camera has a lifetime-free Cloud service (loop record every 3 days). You can decide to whether to use it or not. B.You can also select other Cloud service package, but you need to pay for the subscription. -
Page 14: Ⅶ. Install Your Video Doorbell
Ⅶ. Install your Video Doorbell Mark drill holes and drill holes in your wall. Insert anchors and secure your doorbell to mounting with security screws. Step 1 Step 2 Wall... -
Page 15: Ⅷ. Frequently Asked Questions
Ⅷ. Frequently asked questions How to RESET the doorbell Press and hold the Doorbell Button for 8 seconds. Then follow the in-app instructions to finish your Wi-Fi setup. How to share the device with my family Open the Aiwit app. From the home page, tap the Share icon. Tap Share via Email or Share via QR Code. - Page 16 Why is my Wi-Fi signal poor on my device? Your device may be too far away from your wireless router or you may have some obstructions in between that reduce signal strength. You might try repositioning your router or getting a signal extender/repeater for your wireless router.
-
Page 17: Ⅸ. Set Up Your Wireless Chime (Optional)
Ⅸ. Set up your Wireless Chime (Optional) Connect the video doorbell to the doorbell chime, and get instant alert in your home when someone rings the doorbell. The chime plugs into any wall outlet, you can place it anywhere in the home. NOTICE: The video doorbell is only compatible with our wireless chime, and not compatible with traditional doorbell... - Page 18 Set up your chime with the video doorbell. Step 1 Before the setup process, be sure your video doorbell has connected to your phone and plug in your chime.
- Page 19 Step 2 Step 3 Press the Connect Button. Press the Doorbell Button to pair your doorbell to the chime. Step 4 Step 5 Press the Tune Button to Press the Doorbell Button cycle through 38 different again to make sure it’s tunes and select a tune.
- Page 20 Please Email us for Better Solution Before Returning any Unqualified Product to Amazon Email:support@kamep.cc THANK YOU...
Need help?
Do you have a question about the T8 and is the answer not in the manual?
Questions and answers
How to remove to recharge
To remove the KAMEP T8 battery for recharging:
1. Remove the battery tab.
2. Take out the 18650 batteries from the device.
3. Recharge the batteries using a Micro USB cable connected to a USB charger.
4. It takes about 14 hours to fully charge the batteries.
This answer is automatically generated
can this door bell be hardwired. If yes - is there a demonstration of how this can be done. Please do not email me with any of your advertising. I only want my questioned answered. No updates please