Advertisement
Deactivating the Try-me Mode (Only for Try-me box laptop)
Before switching on the laptop, remove the "Try-me" tag to end the "Try-me" mode to gain full access to the games.
(See diagram on Pg 2)
Cleaning and Maintenance
The unit should be regularly examined for damage to the enclosure and other parts. In the event of such damage, the
unit must not be used until the damage has been repaired. Always disconnect the power supply before cleaning.
Wipe the unit with a dry cloth.
• Do not get the unit wet.
• Do not dismantle the unit.
Auto-off
If there is no input on the unit for five minutes, the unit says goodbye and automatically
turns itself off to conserve power. To start playing again, just press the on/off button to
turn the unit back on.
Starting the -Bright
Laptop
™
Open the unit by sliding the two lock buttons towards the player (located on both sides of the unit).
Turn on the
-Bright
Laptop using the on/off button located on the bottom right of the keyboard.
™
At the end of a session, remember to turn off the power by pressing the same button.
Tell me your name
When the
-Bright
Laptop is first used, it will ask for the player's name. Enter the name and press the "Enter" button
™
when ready. If a mistake is made, press the "Clear" button to enter the name again.
The name will be stored after it is entered. The -Bright
name needs to be changed after it has been stored, press the "Name" button to see the name animation, and press the
"Clear" button to go back to the Enter the name screen.
Laptop will now be able to greet the player by name. If the
™
Press the on/off button
4
Advertisement
