Download Print this page

English Blinds Wooden Blinds Installation Manual

Advertisement

Quick Links

Installation Guide for
Wooden Blinds
1
Fitting the Brackets
The brackets can be fitted in three di erent ways:
Face Fix
Top Fix
Side Fix
Blinds with a larger width come supplied with center support brackets. These need to be aligned with the top of the box (side) brackets. Install
them with the bigger flap situated at the top and space them equally along the width of the blind making sure they are clear of any cords
coming out of the headrail. They can be both face-fixed or top-fixed.
Face Fix
Top Fix

Advertisement

loading
Need help?

Need help?

Do you have a question about the Wooden Blinds and is the answer not in the manual?

Questions and answers

Summary of Contents for English Blinds Wooden Blinds

  • Page 1 Installation Guide for Wooden Blinds Fitting the Brackets The brackets can be fitted in three di erent ways: Face Fix Top Fix Side Fix Blinds with a larger width come supplied with center support brackets. These need to be aligned with the top of the box (side) brackets. Install them with the bigger flap situated at the top and space them equally along the width of the blind making sure they are clear of any cords coming out of the headrail.
  • Page 2 Installation Guide for Wooden Blinds Installing the Blind Open the gate of the box brackets, li the blind up and slide the headrail into the open brackets. Swing the hinged section of the bracket down and press firmly until it is locked.
  • Page 3 Wooden Blinds Installation Guide for Child Safety Breakaway Cord Condenser A breakaway cord condenser comes pre-fitted to the li cords, so when a horizontal force is If the cord condenser becomes separated: applied to the cords entering the condenser, it will safely break apart thereby eliminating any Firstly, untwist and untangle the cords.
  • Page 4 Installation Guide for Wooden Blinds Operation Instructions To tilt the blind: Pull on the required tilt cord tassel to tilt slats to the desired position. Tilt Cords Cord Make sure to tilt the slats to the horizontal (open) position before raising or lowering to extend the life of the blind.