PROLiNK PHB6003E - Bluetooth Stereo Headset Manual
  1. Manuals
  2. Brands
  3. PROLiNK Manuals
  4. Headsets
  5. PHB6003E
  6. User manual

PROLiNK PHB6003E - Bluetooth Stereo Headset Manual

Advertisement

Table of Contents
Contents
PROLiNK PHB6003E - Bluetooth Stereo Headset Manual

BEFORE GETTING STARTED

This User's Manual is designed to aid you to get started with the device. If you experience problems following these guides or need further information pertaining to the device, please visit our website at www.prolink2u.com. All specifications are subject to the manufacturer's configuration at the time of shipping and may change without prior notice, written or otherwise.

Package Contents

  1. 1 x Bluetooth Stereo Headset
  2. 1 x USB Charging Cable
  3. 1 x 3.5mm Audio Cable
  4. 1 x User Manual

Note:

  • If any of above item is not packed in your package when open, please consult your reseller immediately.

Overview of the Device

Overview of the Device

  1. Power On/Off, Answer/ End/ Reject Call, Redial Last Number, Pause/Play
  2. Bluetooth/Music (TF) Mode
  3. Next Track/Volume Up
  4. Previous Track/Volume Down
  5. Micro USB Charging Port
  1. 3.5mm Audio Jack
  2. LED Indicator
  3. TF Card Slot
  4. Foldable & Adjustable Headband

Features

  • Stable and wireless connection for Bluetooth enabled device(s)
  • Immersive listening experience with the comfortable ear pads and adjustable headband
  • Conveniently change it to a portable music player by inserting the TF card
  • Respond to calls with the physical On/Off button (answer / end) and talk freely using the noise-reduction microphone
  • Follow voice prompts to pair and operate the headset in different usage modes with ease
  • Equipped with the 300mAh Li-Polymer rechargeable battery, this headset lasts up to 8 hours working time or 170 hours in standby mode
  • Travel-friendly foldable design
  • Compatible with most mainstream music player and smartphones by connecting through the 3.5mm Audio cable

Specifications

Driver Size: 40mm
Audio:

  • Output Channel: Stereo
  • Output Power: 30mW (max.)
  • Frequency Response: 20Hz ~ 20KHz
  • Microphone: Support
  • Microphone Sensitivity: -42db ± 3dB

Bluetooth:

  • Bluetooth Version: 5.0 (backwards compatible)
  • Support Profile: a2dp/avctp/avdtp/avrcp/hfp/spp/smp/att/gap/gatt/rfcom m/sdp/L2cap profile
  • Frequency: 2.402GHz - 2.480GHz

Modes:

  • TF Slot: Up to 32GB
  • Aux-In: Connect through the 3.5mm Audio Cable

Power:

  • Battery Type: Built-in Li-Polymer Battery 300mAh
  • Operating Time: Up to 8 hours; Standby Time: up to 170 hours
  • Charging Time: Approx. 2 hours

Transmission Distance: Up to 10 meters (line of sight)
Dimension (WxHxD): 17mm x 8mm x 15.2mm
Weight: 158g
** Operating time varies depending on volume level

Using the Device

Use and Handling

  • Do not expose the headset to dust, moisture, liquid, high temperatures or direct sunlight.
  • Do not throw, drop, and knock on the headset with strong physical shock.
  • Use a soft and dry cloth to clean the headset. Do not wipe with a chemically treated cleaning cloth.
  • Do not disassemble the headset as this may cause damage to the internal components.
  • Permanent hearing loss may occur if the headset is used at high volume. Set the volume to a safe level. Over time, increasingly loud audio may start to sound normal but can actually be damaging to your hearing.
  • To protect your hearing:
    • Limit the amount of time you use the headset at high volume.
    • Avoid raising the volume to block out noisy surroundings.
    • Lower the volume if you unable to hear people speaking near you.
  • If you feel the headset is irritating your skin, stop using it immediately.

Notes:

  • If charging starts while the headset is turned on, the headset will turn off automatically.
  • The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. It is recommended to recharge your headset at least once a month.
  • The headset comes with Power Saving Mode - powers off automatically if no established connection within 5 minutes.

Charging the Headset

  1. Please charge the battery fully before first use.
  2. Insert USB charging cable into USB port which supports 5V/1A (e.g. USB Charger, Power Bank or PC/Laptop USB port).
  3. Connect charging cable to the Micro USB port of headset.
  4. The headset LED lights in Red while charging and goes to Blue after charging is completed.
  5. It takes about 2 hours time to charge the headset.
  6. Recharge the headset battery when you hear the voice prompt of "Battery low".

Using the Device

Bluetooth Mode

  1. Powering On: Press and hold "" for more than 3 seconds (voice prompt: "Bluetooth Mode"), the headset enters into Bluetooth mode.
  2. Pairing Operation:
    1. Pairing for the first time:
      • Power on the headset (voice prompt: "Bluetooth mode"), LED indicator flashes in Blue and Green after entering the Bluetooth mode.
      • Enable the Bluetooth function of your device and select "PHB6003E". Please enter "0000" if pin code is required.
      • Upon completion, LED indicator blinks in Blue (voice prompt: "Connected").
    2. Re-pairing to other Bluetooth device:
      • Turn off the Bluetooth function of connected device (voice prompt: "Disconnected") and the LED indicator flashes in Blue and Green.
      • Enable the Bluetooth function of the other device and select "PHB6003E". Please enter "0000" if pin code is required.
      • Upon completion, LED indicator blinks in Blue (voice prompt: "Connected").
    3. Re-connecting:
      • Search and pair to the last connected Bluetooth device within 3 seconds after powering on.

TF Mode (Memory Card)

  1. Insert TF/MicroSD card into the card slot (voice prompt: "Music") to play stored media automatically. When the headset is in Bluetooth, switch to TF Mode by pressing the "M" button.
  2. Audio File Formats: support MP3 and WAV

Aux-in Mode

Connect to external device using the provided 3.5mm audio cable, the Bluetooth function will be turned off automatically

Button Descriptions

Buttons Status Functions
- Press and hold to power on / off
Standby Press twice to redial last number
Ringing Press to answer call;
Press and hold to reject call
During phone call Press to end call
Playing music Press to pause / play
During phone call Press to decrease the volume
Playing music Press and hold for previous track;
Press to decrease the volume (tone: "Dudu" when minimum)
During phone call Press to increase the volume
Playing music Press and hold for next track;
Press to increase the volume (tone: "Dudu" when maximum)
Standby / Playing Music Press to toggle between Bluetooth / TF modes;
Press and hold for deactivating / activating the breathing LED (deactivate for longer battery life)

LED Indicators

Status LED Behavior
Charging LED indicator lights in Red. LED indicator lights in Blue when fully charge
Pairing LED indicator flashes in Blue and Green
Operating Bluetooth Mode: LED indicator blinks in Blue
TF Mode: LED indicator blinks in Green every 2 seconds
Aux-in Mode: the headset automatically turns off and LED indicator goes off

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download PROLiNK PHB6003E - Bluetooth Stereo Headset Manual

Advertisement

Need help?

Need help?

Do you have a question about the PHB6003E and is the answer not in the manual?

Questions and answers

Save Article as PDF

Table of Contents