Installation; Dimension; Maintenance - Daewoo DAHST Series User Manual

2.INSTALLATION

The hoist <STANDARD VERSION> is provided with a specially designed bracket system which
allows to hold pipes box.
Check the socket features (volt-hertz) correspond to those indicated on the machine plate; then you
can insert the plug.
In case a cable extension is needed, it is absolutely important to respect the cable's data.

3.DIMENSION

PA Series
L
W
H
A
B
Screw size
INSULATION CLASS
Insulation Class: B
Protection Class: IP54
Working System: Intermittent Duty Cycle (S3 20%-10min)

4. MAINTENANCE

- Periodically check that the steel cable is in good conditions.
-Check that the screws securing the brackets and reduction gear are well tightened.
-Check the conditions and tightening of the nuts securing the steel cable clamps.
-Periodically check that motor stop switch and push button switch are in good operating conditions.
-Periodically check whether the wire rope is in good condition. If not, it need to be replaced by
respecting that the following chart.
200A 250A 300A 400A
330 330 330 385
134 134 134 147
146 146 146 178
212
88
M8 x 22mm
500A 600A 800A
385 385 410
147 147 147
178 178 178
220 220
100 100
M10 x 24mm
4
1000A 1200A
470 470
170 170
265 265
270 270
112 112
M12 x 30mm