Conrad WQ 140 Instruction Manual

Solar powered alarm desktop clock

Table of Contents

Download this manual

WQ 140

Solar Powered Alarm Desktop Clock

Instruction Manual

Fig. 1 Front view

Fig. 2 Back view

Introduction

This solar powered desktop clock comes with calendar, day, and temperature display. It

is solar powered with optional backup DC batteries. The light condition in most bright

indoor spaces is sufficient to recharge the built-in rechargeable batteries. Exposing the

Table of Contents

Do you have a question about the WQ 140 and is the answer not in the manual?

Page 1 WQ 140 Solar Powered Alarm Desktop Clock Instruction Manual Fig. 1 Front view Fig. 2 Back view Introduction This solar powered desktop clock comes with calendar, day, and temperature display. It is solar powered with optional backup DC batteries. The light condition in most bright...
Page 2 unit to direct sunlight is not suggested and it is not necessary. (1) “SNOOZE” button (2) “MODE” button (3) “UP/C/F/ ” button (4) “SET ” button (5) Battery compartment Getting started: Toggle the “On/Off” switch located under the battery compartment (5) to turn on the clock, Optional batteries installation 1.
Page 3 To set alarm time: a) Press [MODE] to alternate to alarm clock mode. Long press [SET] for 2 seconds to enter alarm clock setting. Press [SET] to change target in following sequence: hour → second → confirm. b) During alarm clock mode other than setting mode, press [UP ] to turn C/F/ on/turn off alarm.