Page 1
By Z-Wave.Me, Smart Systems Distribution Sàrl Z-Wave & Zigbee/Thread mPCIe Adaptor ZME_mPCIe_ZW_ZB Congratulations! You have got a modern Z-Wave & Zigbee/Thread mini PCI Express adaptor. It will transform your computer into a full featured smart home gateway. Installation Steps 1. Install the Z-Wave & Zigbee/Thread mPCIe adaptor in your embedded hardware.
Z-Way Web UI using a browser by typing in the address bar: http://IP:8083. PRIVACY NOTE: Z-Way by default connects to the server find.z-wave.me in order to provide remote access. If you don’t need this service, you can turn off this feature after logging into Z-Way (Main menu >...
Page 3
Z-Wave & Zigbee/Thread mPCIe Adaptor 3. The full list of all devices is in Widgets (3) 4. Every sensor or relay triggerings are displayed in Events (4) 5. Set up scenes, rules, schedules and alarms in Quick Automation (5) 6. Apps and system settings are in the Main menu (6) A device can provide several functions, for example a 3-in-1 Multisensor provides: motion sensor, light sensor and temperature sensor.
Page 4
Z-Wave & Zigbee/Thread mPCIe Adaptor Mobile App Z-Wave.Me Hardware Spectfication Z-Wave Transceiver Silicon Labs ZGM130S Zigbee Transceiver Silicon Labs EFR32MG21P Wireless Range Min. 40 m indoor in direct line of sight Dimensions 30 x 51 x 4 mm Interface USB (mPCIe form factor)
Z-Wave & Zigbee/Thread mPCIe Adaptor FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
Page 6
Z-Wave & Zigbee/Thread mPCIe Adaptor .5 Trace antenna designs Not applicable. The module has its own antenna, and doesn’t need a host’s printed board microstrip trace antenna etc. 2.6 RF exposure considerations The module must be installed in the host equipment such that at least 20mm is maintained between theantenna and users’...
Page 7
Z-Wave & Zigbee/Thread mPCIe Adaptor 2.8 Label and compliance information Host product manufacturers need to provide a physical or e-label stating “Contains FCC ID 2ALIB-ZMEMPCIEZWZB With their finished product. 2.9 Information on test modes and additional testing requirements IEEE 802.15.14 (Zigbee/Thread): Operation Frequency:2402~2480MHz Number of Channel:40 Channels Modulation Type:OQPSK...