Download
Share
Print this page
veise VS01 Installation Manual
  1. Manuals
  2. Brands
  3. veise Manuals
  4. Keypad
  5. VS01
  6. Installation manual

veise VS01 Installation Manual

Keypad digital deadbolt
Hide thumbs Also See for VS01:

Advertisement

Quick Links

Download this manual
VS01
Keypad Digital Deadbolt
Installation Guide / Programming Instructions

Advertisement

loading
Need help?

Need help?

Do you have a question about the VS01 and is the answer not in the manual?

Questions and answers

Related Manuals for veise VS01

Summary of Contents for veise VS01

  • Page 1 VS01 Keypad Digital Deadbolt Installation Guide / Programming Instructions...
  • Page 3 Interior Assembly (F) Battery Mounting Cover (G) plate (E) Mounting Plate Screws (J) Interior Assembly Screws (K) Latch (A) Latch Screws Strike Screws Exterior Assembly Strike (C)

  • Page 4: Parts List

    Parts List Latch x1 Drive-In Collar (Optional) Strike x1 Exterior Assembly x1 Mounting Plate x1 Interior Assembly x1 Battery Cover x1 Strike Screws x2 Latch Screws x2 Mounting Plate Interior Assembly Reset Tool Screws x2 Screws x3 If any parts are missing or damaged, please contact Customer Support.
  • Page 5 STEP Prepare the door and check dimensions 2-3/8" or 2-3/4" (60 or 70mm) Measure to Measure to confirm confirm that the that the backset is hole in the door is either 2-3/8" or 2-1/8" (54mm). 2-3/4" (60 or 70mm) Measure to confirm that the hole in the door edge is 1"...
  • Page 6 STEP Install the latch and strike Determine backset and adjust the latch No adjustment is required. Proceed to next step. Slotted hole is NOT centered. Hold the latch in front of the door hole, Rotate and pull the with the latch face flush against the latch as shown to door edge.
  • Page 8 STEP Install exterior assembly IMPORTANT: Locked Unlocked Before installation, make sure the latch is fully retracted (in the unlocked position) Keep parallel to door edge. Mounting Plate Screws(J) With the latch fully retracted (in the unlocked Secure the mounting plate with position), route the cable below the latch.

  • Page 9: Install Interior Assembly

    STEP Install interior assembly Insert the cable connector to the Push the battery cover out in socket. Push the the direction as illustrated. connector in firmly until it is completely attached. Attach Interior Keep the thumb turn in vertical position and install Assembly to the interior assembly.
  • Page 11 Exterior Assembly Interior Assembly Keypad Battery Cover Reset Button Light Indicater Reboot Button Thumb Turn Micro USB Power Port...
  • Page 12 Master code User code...