Related Manuals for Schmidt FT
Summary of Contents for Schmidt FT
- Page 1 S C H M I D T c o n t r o l i n s t r u m e n t s Edition FT 03.E FT Series Model Instruction Manual Valid as of: 01.09.2011 • Please keep the manual for future reference!
-
Page 2: Table Of Contents
Contents 1 Warranty and liability ....................3 1.1 Notices within the instruction manual ..............3 1.2 Responsibilities of the operating company ............. 3 1.3 Responsibilities of the personnel ................3 1.4 Informal safety measures ..................4 1.5 Training of the personnel ..................4 1.6 Intended use ...................... -
Page 3: Warranty And Liability
Warranty: - SCHMIDT Mechanical Screen Printing Tension Meter are warranted for 12 months. Parts subject to wear, electronic components and measuring springs are not covered by the warranty. No warranty or liability will be accepted for bodily injury or property damage resulting from one or several of the following causes: - Misuse or abuse of the device. -
Page 4: Informal Safety Measures
The device is intended exclusively to be used as a tension of print screens. Any other use or any use exceeding this intention will be regarded as misuse. Under no circumstances shall Hans Schmidt & Co GmbH be held liable for damage resulting from misuse. -
Page 5: Available Models
Available models Measuring Measuring Model Range Force 6 - 50 N/cm 2.1 - 3.0 N 2.1 Specifications Tension range: 6 - 50 N/cm Depth of indentation: Max. 1 mm Measuring force: 2.1 - 3.0 N Scale diameter: 54 mm Dimensions: 75 x 46 x 115 mm (L x W x H) Weight, net (gross): Approx. -
Page 6: Measuring
The ID plate with the serial number as well as the calibration label (optional) are provided on the rear side of the instrument, the SCHMIDT Quality Seal are pro- vided on the front side. Measuring with the screen printing tension meter... -
Page 7: Marking A Tension Range
3.3 Marking a tension range Marker The instrument is equipped with two adjustable marks to mark a tension range which is mostly used. -
Page 8: Testing The Screen Printing Tension Meter
4 Testing the screen printing tension meter - In unloaded conditions the indicator must point at zero, at which the index line of the scale has to point optical upright to the top (The outer ring of the scale can be turned) - Place the device on a flat surface (e. -
Page 9: Verification Of Calibration And Determination Of Repair Costs
7 Verification of calibration and determination of repair costs Flow chart for verifying the calibration of used tension meters, incoming and outgoing verifi- cation with Inspection Certificate 3.1 according to DIN EN 10204 Delivery Visual inspection and functional test Unit can be Vertification of the calibrated calibration... -
Page 10: Correspondence
Please indicate in your order whether you require an Inspection Certificate 3.1 according to DIN EN 10204. Service address: Hans Schmidt & Co GmbH Schichtstr. 16 D-84478 Waldkraiburg Germany... - Page 11 Notes:...
- Page 12 Yarn Package Durometer and Shore Durometer Sample Cutter Balance Moisture Meter Leak Tester More than 75 years - Worldwide - Hans Schmidt & Co GmbH Mailing address: P. O. B. 11 54 Phone: e-mail: 84464 Waldkraiburg Germany int. + 49 / (0)8638 / 9410-0 info@hans-schmidt.com...
Need help?
Do you have a question about the FT and is the answer not in the manual?
Questions and answers