Artsound PWR01 - Waterproof Speaker Manual

PRODUCT DIAGRAM

1. Volume Up / Next Track
2. Volume Down /
   Previous Track
3. TWS (True Wireless Stereo)
4. Working state LED
5. Bluetooth / Reset -
   Answer / Reject Call
6. Power On / Off - Play / Pause
7. Power LED
8. AUX IN Jack
9. Charging port

OPERATION

CHARGING YOUR SPEAKER

1. Use the type-C power cord in the accessories to connect the DC 5V charger and speaker for charging.
2. The orange power LED will turn on to indicate that the unit is charging. then will turn off when fully charged.

Note: A full charge takes approximately 3 hours.

POWER ON / POWER OFF

Power on: Press and hold the button for 2 seconds to power on the speaker. The working state LED will flash.
Power off: Press and hold the button for 2 seconds to power off the speaker. The working state LED will turn off.

PAIRING BLUETOOTH DEVICES WITH YOUR SPEAKER

The speaker will not automatically connect to a new device when power on. In order to pair your Bluetooth audio device with your Bluetooth Speaker for the first time, follow the steps below:

1. Power on your speaker, the working state LED will fl ash in green.
2. Enable Bluetooth on your devices (phone or audio device). Refer to the manufacturer's instructions for details.
3. Search for Bluetooth devices and select "PWR01". If required, enter the password "0000" to confi rm and complete the pairing process.
4. The speaker will beep when the devices are paired. And the working state LED will turn to green.

Note: The speaker will power off automatically if no connection within 20 minutes.

DISCONNECT BLUETOOTH

Press and hold button 2 seconds, the speaker will disconnect with the Bluetooth device, others Bluetooth device will connect with the speaker.

BLUETOOTH MUSIC PLAYBACK

1. Open the music player and select a song to play. Press the button to pause / play the music.
2. Click the + button to increase the volume or long press to skip to the next song.
3. Click the - button to decrease the volume or long press to skip to the previous song.

BLUETOOTH PHONE CALLS

1. Click the button to answer an incoming call. Click again to end the call.
2. Press and hold the button for 2 seconds to reject the call.

AUX IN MODE

1. Use the 3.5mm audio cable in the accessories to connect the audio source equipment and speaker
2. Turn on the audio source device and play music
3. Press the button to play or mute the speaker.

TWS FUNCTION

You can purchase two PWR01 speakers so you can connect them together and enjoy the True Wireless Stereo sound. (32W)

1. Turn off the Bluetooth on your phone or device and make sure speakers are not connected with any devices (also remove the Aux-in cable).
2. Choose one of them as the master unit at will. First click the button on the master x then two speakers will automatically connect each other.
3. Now turn on Bluetooth on your phone or device. And start to search for Bluetooth devices, the "PWR01" will be found, please connect it. If you want to connect PC or other devices with Audio via Aux Cable, please choose the master unit.
4. Once TWS connected, it will re-connect automatically when next power on, otherwise you can clear TWS by long press button.

LIGHT THEME

Double click the button when playing the music, the light theme can be changed. There are three light themes: Gradient changing light---Breathing Light---no light.

RESET

Press and hold the button 2 seconds to clear pairing records.
(Bluetooth and TWS pairing records)

TROUBLESHOOTING

My speaker will not switch on

Please recharge it and make sure it has enough power. Plug the unit into a charger and see if the power LED indicator turn on.

Why can't I pair this speaker with other Bluetooth devices?

Please check the following:
Your Bluetooth device supports the A2DP profile.
The speaker and your device are next to each other (within 1m).
The speaker has connected one Bluetooth devices, if yes, you can press the button cleared and pairing new device.

SPECIFICATION

Bluetooth version: V5.0
Maximum output: 16W
Built-in power: Li-ion 3.6V 2500mAh
SNR: 75dB
Wireless Working Frequency: 80HZ-20KHZ
Wireless Transmission Distance: up to 33 ft (10M)
Charging Time: about 3-4 hours
Playback Time: up to 12 hours
Charging: DC 5 V±0.5/1A
Dim. (ø) 84mm x (h) 95mm

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Artsound PWR01 - Waterproof Speaker Manual