Before Use; Electronic Speed Control - Taurus MIXING CHEF COMPACT Instructions For Use Manual

EN
(Original instructions)
APPLIANCE TYPE
APPLIANCE MODEL
DESCRIPTION
A Transparent lid
B Motor body
C Bowl
D Accessories mouting
E Couple/uncouple button
F Speed selector
G Whisk
H Mixing beater
I Dough hook
USE AND CARE
Extend unroll the appliance's power cable
before each use.
Do not use the appliance if its accessories are
not properly fitted.
Do not use the appliance if the accessories
attached to it are defective. Replace them
immediately.
Do not use the appliance if the on/off switch
does not work.
Do not move the appliance while in use.
Do not turn the appliance over while it is in use
or connected to the mains.
Do not force the appliance's work capacity.
Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
Use the appliance and its accessories and
tools in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use the appliance
for operations different from those intended
could result in a hazardous situation.
Do not use the appliance for more than 5
minutes at any one time. Allow to cool before
subsequent use.
INSTRUCTIONS FOR USE

BEFORE USE

Make sure that all products' packaging has
been removed.
Before using the product for the first time,
clean the parts that will come into contact with
food in the manner described in the cleaning
section.
Prepare the appliance according to the function
you wish to use:
USE
Extend the cable completely before plugging
it in.
Connect the appliance to the mains.
Press the couple/uncouple button (E) to raise
the upper part. (Fig. 1).
Fix bowl on to the base and, lock it as
arrowhead denotes. (Fig. 2).
Fix the transparent lid (A) to avoid splashes on
machine's arm and check it is well fixed.
Fix whisk (G), mixing beater (H) or dough hook
(I) as desired in the accessories mounting and
turn clockwise until it stays well fixed. (Fig. 3).
Press the couple/uncouple button and push
the upper part downwards until the button is
returned to its original position. (Fig. 4).
Turn the appliance on, by using the speed
selector.
To avoid a fierce start up of the appliance, it
is advisable to start off from the lowest speed
position and, once the appliance has been
switched on, progressively increase the speed
to the desired position.

ELECTRONIC SPEED CONTROL

The speed of the appliance can be regulated
by using the speed regulator control (F). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.
The speed control can be used for the desired