Download Print this page

Krown KA1000RR Instruction Manual

Remote receiver

KA1000RR

Remote Receiver

Instruction Manual

1st Edition

Table of Contents

Need help?

Do you have a question about the KA1000RR and is the answer not in the manual?

Page 1 KA1000RR Remote Receiver Instruction Manual 1st Edition...
Page 2 Introduction ......... . .1 Installing your KA1000RR .......1 Programming the KA1000RR Memory .
Page 3 ﬂ ashing lamp to alert of an incoming telephone call, door bell signaler, alarm notiﬁ cation and much more up to a 300 foot radius. The KA1000RR can be hold up to 16 different trans- mitters and signal in 16 different methods.
Page 4 PROGRAMMING THE KA1000RR MEMORY To program the KA1000RR, press and hold the light switch but- ton on the KA1000RR (ﬁ gure 2.1). While holding the light switch button, press and hold the transmitter test button until the LED on the light switch button turns off then on one time. The transmit- ter ID is now recorded into memory of the receiver.
Page 5 To erase a transmitter from memory, press and hold the test but- ton of the transmitter and light switch button at the same time. The KA1000RR will turn off then on twice to conﬁ rm the transmitter has been removed from memory.
Page 6 Krown Manufacturing, Inc. This warranty does not apply to the KA1000RR if it has been damaged, modiﬁ ed, abused or altered after the date of purchase or if it fails to operate due improper maintenance or inadequate AC or DC power.
Page 8 3408 Indale Road, Fort Worth, TX 76116 Voice: (817) 738-2485 TTY: (817) 738-8993 Fax: (817) 738-1970 E-mail: Info@KrownMfg.com Web site: www.KrownMfg.com...