Neilsen CT3793 Instructions Manual
  1. Manuals
  2. Brands
  3. Neilsen Manuals
  4. Water Pump
  5. CT3793
  6. Instructions manual

Neilsen CT3793 Instructions Manual

3cfm vacuum pump
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
3CFM VACUUM PUMP CT3793
ORIGINAL INSTRUCTIONS
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
SAVE THESE INSTRUCTIONS AND PRECAUTIONS.
READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.

Advertisement

Table of Contents
loading

Related Manuals for Neilsen CT3793

Summary of Contents for Neilsen CT3793

  • Page 1 3CFM VACUUM PUMP CT3793 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.

  • Page 2: Ec Declaration Of Conformity

    In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: 3CFM VACUUM PUMP Model: CT3793 Applicable EC Directives: EC Low Voltage Directive 2014/35/EU EC Directive of Electromagnetic Compatibility 2014/30/EU...
  • Page 3 1. MAIN TECHNIQUE PARAMETERS Model： CT3793 Voltage: 220-240V~ Frequency: 50Hz Flow rate: 3cfm Ultimate Vacuum 10Pa Power: 1/4HP Rotate speed: 1440r/min Oil capacity: 200ml Dimensions: 249x121x230mm Oil Anti-flow back design The gas inlet is specially designed to prevent the oil from flowing back, preventing the container and the hoses from being polluted.

  • Page 4: Product Illustration

    2. CAUTIONS  Don’t pump flammable, explosive or poisonous gases.  Don’t pump gas that can corrode metals and exert chemical charges.  Don’t pump gas containing any dust or moisture.  The temperature of the pumped gas shouldn’t be over 176 F (80 C), and the environment temperature should be around 23°F(-5...

  • Page 5: Installation

    5. USE’S MANUAL  Examine the oil-level before using to make sure the oil-level is not lower than the oil-level line in the sight glass. Do not run pump with low oil levels. Add oil to bring it up to the oil level line.

  • Page 6: Maintenance

    8. MAINTENANCE  Keep the pump clean and prevent foreign matter from entering.  Keep the oil filled to the oil-level. Don't let pump run without oil.  Keep the oil clean. If the oil becomes dirty, muddy, or water or other volatile substances gets in, it will affect the performance of the pump and the oil should be replaced.
  • Page 7 11. ASSEMBLY DIAGRAM AND PARTS LIST...
  • Page 8 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...

Table of Contents