Advertisement
Advertisement
Table of Contents
Related Manuals for SEO Electronics CANeasy
Summary of Contents for SEO Electronics CANeasy
- Page 1 SEO CANeasy SELF PROGRAMMING CONTACTLESS CONVERTER INSTALLER MANUAL v 1.1 300319...
- Page 2 O350 programmer device. • untwist CAN BUS twisted pair and attach both wires to SEO CANeasy on both sides of PCB Then strap both wires to the PCB using cable ties. Device will detect CAN L/CAN H polarity automatically, •...
- Page 3 Press and hold the button for 5 seconds to activate the automatic calibration and Program number selection process. SEO CANeasy device will select and set the most appropriate for a specific vehicle from the existing database of 2500 vehicles and it will additionally select another 8 similar Program numbers that may also be appropriate for specific vehicle.
- Page 4 SEO CANeasy restarts after executing each function and after entering an incorrect Program number SEO CANeasy, unlike SEO CANlog converter, works only in the listening mode, i.e. it does not send any requests to the CAN BUS, hence not all data from the vehicle can be obtained. By entering the Program number automatically selected by SEO CANeasy into the SEO CANlog converter, it may be possible to obtain more needed parameters.
- Page 5 • Reading car data that is available in contactless way. You can easily simulate the functioning of the SEO CANeasy device by connecting it to the power supply and setting Program number 11188. Then CPU does not enter sleep mode and the device generates data, frames and values through UART/RS232 port even when the converter is not connected to the car.
Need help?
Do you have a question about the CANeasy and is the answer not in the manual?
Questions and answers