Tilt-Adjustment Feet
Elevator Button
Elevator Feet
Adjusting the Projected Image
Adjusting the Projector's Height
The projector is equipped with elevator feet for adjusting the
image height.
To raise the image:
1. Press the elevator button
2. Raise the image to the desired height angle
the button to lock the elevator feet into position.
3. Use screw in feet
To lower the image:
1. Press the elevator button.
2. Lower the image, then release the button to lock the
elevator feet into position.
3. Use screw in feet
Installation
.
to fi ne-tune the display angle.
to fi ne-tune the display angle.
3
1
2
, then release
15