Download Print this page
Autocall A4098-5217 Installation Instructions Manual

Autocall A4098-5217 Installation Instructions Manual

Sounder and sounder beacon

Advertisement

Quick Links

Cautions, Warnings, and Regulatory Information
READ AND SAVE THESE INSTRUCTIONS Follow the instructions in this installation manual. These instructions must be followed to avoid damage to
this product and associated equipment. Product operation and reliability depend upon proper installation.
DO NOT INSTALL ANY AUTOCALL™ PRODUCT THAT APPEARS DAMAGED Upon unpacking your Autocall product, inspect the
contents of the carton for shipping damage. If damage is apparent, immediately file a claim with the carrier and notify an authorized
Autocall product supplier.
ELECTRICAL HAZARD Disconnect electrical field power when making any internal adjustments or repairs. All repairs should be
performed by a representative or an authorized agent of your local Autocall product supplier.
STATIC HAZARD Static electricity can damage components. Handle as follows: Ground yourself before opening or installing
components. Prior to installation, keep components wrapped in anti-static material at all times.
Application Notes
The Wall variants are UL listed for General Signaling only but cannot be used in lieu of UL listed Notification Appliances in the area where they are
listed. The Base variants are not suitable for evacuation notification usage.
Introduction
The Addressable Sounder and Sounder Beacons operate with the 4100ES or 4010ES Fire Alarm Control Panels via their Loop Card's addressable loop
but must not be used with unauthorised third-party equipment. They are available in ceiling and wall mounting variants including an outdoor wall
version. The ceiling mounted variants provide a base for fitting an addressable Fire Detector. Alternatively a blanking cap should be fitted.
Summary of the range
Product
Base variant
A4098-5217
A4098-5220
Wall variant
A4906-5213
A4906-5214
A4906-5215
Accessories
A4905-5201
A4905-5202
A4905-5203
A4905-5204
A4905-5205
Sounder and Sounder Beacon Installation Instructions
Details
Addressable Base Sounder
Addressable Base Sounder Beacon
Addressable Wall Sounder Beacon White
Addressable Wall Sounder Beacon Red
Addressable Wall Sounder Beacon Weatherproof
Blanking Cap for Sounder Bases
Conduit Adaptor for Sounder Bases
Shallow Surface Back Box for Indoor Wall Sounder Red
Shallow Surface Back Box for Indoor Wall Sounder White
Flush Backbox Adaptor for Indoor Wall Sounder
579-1317AC Rev B
*05791317ACB*

Advertisement

loading
Need help?

Need help?

Do you have a question about the A4098-5217 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Autocall A4098-5217

  • Page 1 Product operation and reliability depend upon proper installation. DO NOT INSTALL ANY AUTOCALL™ PRODUCT THAT APPEARS DAMAGED Upon unpacking your Autocall product, inspect the contents of the carton for shipping damage. If damage is apparent, immediately file a claim with the carrier and notify an authorized Autocall product supplier.
  • Page 2: General Information

    Sounder and Sounder Beacon Installation Instructions Product Details A4905-5206 Deep Surface Back Box for Indoor Wall Sounder Red A4905-5207 Deep Surface Back Box for Indoor Wall Sounder White General Information A4098-5217 A4098-5220 A4906-5213 A4906-5214 A4906-5215 Mounting orientation Ceiling Wall Indoor/Outdoor...
  • Page 3: Installation

    Sounder and Sounder Beacon Installation Instructions Installation Dimensions Weatherproof wall units Indoor wall units Base units Figure 3: Base unit 1. Temporary park plunger and indicator (yellow) for short circuit isolator. Figure 1: Sounder Beacon 2. Address flag holder. Figure 2: Sounder Beacon page 3 579-1317AC Rev B...
  • Page 4: Wiring Notes

    Sounder and Sounder Beacon Installation Instructions Wiring Wall variant wiring Base variant wiring Contact and Function L: Not used L1: Positive line in and L2: Negative line (isolator in and out) M: Negative line (isolator in or out) R: Remote LED out, wired only if a remote indicator is required.
  • Page 5 Sounder and Sounder Beacon Installation Instructions Mounting and fixing instructions Weatherproof wall units Indoor wall units Base units These units are supplied with their own 1. Unclip the front cover from the wall unit using the screwdriver These units either fit directly to the slot on the top.
  • Page 6 3. Item 4 is the programming port. © 2021 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision and are subject to change without notice. Additional listings may be applicable, contact your local Autocall product supplier for the latest status.

This manual is also suitable for:

A4098-5220A4906-5213A4906-5214A4906-5215