Page 1
This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
3/16 Allen Key Pozidrive Screwdriver 17mm Spanner COMPONENTS DESCRIPTION Trolley Base (AVMT only) PowaLift Module PZX Screen Mount - Back Plate PZX Screen Mount - Mounting Arms Remote Control Manual Operating Switch & cable Top & Bottom Fixings (AVWM only) Wall Fixing Brackets (AVWM only) PZX9 Converter Plate (71 - 100”...
Page 3
01865 767676 sales@unicol.com www.unicol.com AVMT – TROLLEY AVMT – STEP 2 AVMT – STEP 1 Remove the 8 x M6 x 16 socket button head Place trolley base on a flat surface and apply screws and remove the top cable cover to gain brakes by pressing down levers on each castor.
01865 767676 sales@unicol.com www.unicol.com AVMT – STEP 5 AVMT – STEP 6 Using another team member, lift the screen up and With the screen fitted, cable it up routing through gradually offer it up to the back plate. Gently tilting...
Page 5
When using a PZX1 or PZX3 for 33-70” screens, ‘Connect’. Continue to follow the instructions on remove rear covers and follow AVMT Steps 2, 3 & 4. the App to operate the unit. When using a PZX9 for 71-100” screens, remove rear covers and follow AVMT Steps 2 &...
Page 6
When using a PZX1 or PZX3 for 33-70” screens, base and fix wall plate to wall (fixings not supplied). remove rear covers and follow AVMT Steps 2, 3 & 4. Tighten all screws in top and base. When using a PZX9 for 71 - 100” screens, remove rear covers and follow AVMT Steps 2 &...
Page 7
(fixings not supplied). Tighten all screws in top and bottom brackets. Follow Steps 5,7 & 8 of AVMT instructions to complete installation. AVML7 - Platform (OPTIONAL) STEP 1 (OPTIONAL) STEP 2 (OPTIONAL) Remove the 4 x screws that hold the front clamping The Platform can be adjusted in all planes.