SmartSafe iSmartE VP01 User Manual

Energy vehicle battery pack detector

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

www.newsmartsafe.com

iSmartEV P01 User Manual

stored in a retrieval system, or transmitted in any form or by any

means, electronic, mechanical, photocopying, recording or

otherwise, without the prior written permission of SMARTSAFE.

Neither SMARTSAFE nor its affiliates shall be liable to the

purchaser of this unit or third parties for damages, losses, costs,

or expenses incurred by purchaser or third parties as a result of:

Accident, misuse, or abuse of this unit, or unauthorized

modifications, repairs, or alterations to this unit, or failure to

strictly comply with SMARTSAFE operating and maintenance

instructions. SMARTSAFE shall not be liable for any damages or

problems arising from the use of any options or any consumable

products other than those designated as Original SMARTSAFE

Products or SMARTSAFE Approved Products by SMARTSAFE.

All information, specifications and illustrations in this manual are

based on the latest information available at the time of printing.

SMARTSAFE reserves the right to make changes at any time

without prior written or oral notice.

Trademark Information

SMARTSAFE

registered

trademark

SHENZHEN

SMARTSAFE TECH CO.,LTD. in China and other countries. All

other SMARTSAFE trademarks, service marks, domain names,

logos, and company names referred to in this manual are either

trademarks, registered trademarks, service marks, domain names,

logos, company names of SMARTSAFE or are otherwise the

property of SMARTSAFE or its affiliates. In countries where any

Table of Contents

Need help?

Do you have a question about the iSmartE VP01 and is the answer not in the manual?

Questions and answers

Summary of Contents for SmartSafe iSmartE VP01

Page 1 SMARTSAFE. Neither SMARTSAFE nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of:...
Page 2 You may not use any trademark, service mark, domain name, logo, or company name of SMARTSAFE or any third party without permission from the owner of the applicable trademark, service mark, domain name, logo, or company name. You may contact SMARTSAFE by visiting the website at www.newsmartsafe.com, or writing to...
Page 3 www.newsmartsafe.com iSmartEV P01 User Manual the vehicle must be OFF (and the vehicle is in the non-charging state), and remove the maintenance switch; After the emergency maintenance switch is removed, it shall be kept by full-time guardianship personnel, and ensure that no one will plug it in during the maintenance process.
Page 4 iSmartEV P01 User Manual www.newsmartsafe.com during measurement. 5. The maintenance switch shall not be assembled during low- voltage debugging. In high-voltage debugging, the full-time guardian shall instruct the assembly and maintenance switch. 6. High voltage debugging must be carried out under the premise of good low voltage debugging, so as to determine whether the battery has leakage.
Page 5 www.newsmartsafe.com iSmartEV P01 User Manual oxides, etc.), which will lead to slow response and even serious personal injury or death. The vehicle under test should be parked in a well-ventilated place during operation. 5. Take extreme care when working around ignition coils, distributor caps, ignition lines and plugs.
Page 6 iSmartEV P01 User Manual www.newsmartsafe.com This manual uses the following conventions. PROMPT Prompt information provides helpful information such as additional operation instructions, tips, and suggestions. Example: Prompt: The VIN code is usually located on the driver's side, in the lower right corner of the front windshield. The exact location varies from car to car.
Page 7: Table Of Contents
www.newsmartsafe.com iSmartEV P01 User Manual Table of Contents 1. Packing List ....................1 2. Product Introduction ................5 2.1 Overview ....................5 2.2 iSmartEV P01 ..................5 2.3 iSmartEV BOX ..................8 2.4 Technical Parameters ................8 3. Initial Use ....................11 3.1 Charge the Tablet ................
Page 8 iSmartEV P01 User Manual www.newsmartsafe.com 8.6 ABS Bleeding ..................49 8.7 Throttle Learning ..................49 8.8 Tire Pressure Monitor System Reset ........... 50 8.9 Diesel Particulate Filter (DPF) Regeneration ........51 8.10 Gearbox Matching ................51 8.11 Gear Learning ..................51 8.12 Motor Angle Calibration ..............52 8.13 Coolant Bleed ..................
Page 9 www.newsmartsafe.com iSmartEV P01 User Manual 9. IMMO Matching ..................56 9.1 Vehicle connection ................56 9.2 Operations ................... 56 10. Update ....................61 10.1 Update ....................61 10.2 Renew Subscription ................62 11. Videoscope ................... 63 12. Current Clamp ..................63 13.
Page 10 iSmartEV P01 User Manual www.newsmartsafe.com 16.7 Gallery ....................80 16.8 Recording Master ................80 16.9 Video Player ..................80 16.10 E-mail ....................80 16.11 Camera .................... 80 17. Frequently Asked Questions ...............81 FCC Warnning .................... 83 Warranty...................... 85...
Page 11: Packing List
www.newsmartsafe.com iSmartEV P01 User Manual 1. Packing List The following accessories are for reference only. Please consult from the local agency or check the package list supplied with this tool together. Main Unit and Accessories Name Q'TY Reference Picture iSmartEV P01 iSmartEV BOX OBD II Extension Cable...
Page 12 iSmartEV P01 User Manual www.newsmartsafe.com USB Cable （Type-C） USB Cable （Type-B） Switching Power Supply （12V 5A） OBD I Transfer Cable Cigarette Lighter Light Fuse...
Page 13 www.newsmartsafe.com iSmartEV P01 User Manual Non-16pin Adaptor Cable Kit Password Envelop Quick Reference Guide User Manual Packing List Battery Jumper Adapters Name Q'TY Reference Picture Jumper Cable (Jump-8) Matching Adapter 1 Matching Adapter 2 Matching Adapter 3 Matching Adapter 4 Matching Adapter 5...
Page 14 iSmartEV P01 User Manual www.newsmartsafe.com Matching Adapter 6 Matching Adapter 7 Matching Adapter 8 Matching Adapter 9...
Page 15: Product Introduction
P01 new energy vehicle detection tool is a professional comprehensive testing equipment for new energy vehicles developed by SmartSafe Company. The equipment supports new energy vehicle testing and vehicle battery pack testing functions. • Support deep system detection of battery packs of various...
Page 16 iSmartEV P01 User Manual www.newsmartsafe.com 2.2 iSmartEV P01 Name and Description 10.1-inch Touch Screen Front Facing Camera...
Page 17 www.newsmartsafe.com iSmartEV P01 User Manual Power Indicator Light Red during charging and green after fully charged. Handle Volume - Volume+ Power Button/Screen Lock Button • Press the button for about 3 seconds to start the machine when the power is off. •...
Page 18: Ismartev Box
iSmartEV P01 User Manual www.newsmartsafe.com 2.3 iSmartEV BOX The device is a Vehicle Communication Interface (VCI) device, which is used to connect the vehicle diagnosis seat or battery pack low-voltage signal communication interface for data collection, and then send the data to the host for analysis. Name and Description USB Type-B DC 12V Power Supply Jack...
Page 19: Technical Parameters
www.newsmartsafe.com iSmartEV P01 User Manual 2.4 Technical Parameters 2.4.1 iSmartEV P01 Item Specification Parameters Operation System Android 11 8-core Processor, 2.0GHz Internal Storage Storage 128GB 10.1 inch Touch Screen ， 1920x1200 Display Screen Resolution Front Facing 8 Million Pixels Camera Rear Camera 13 Million Pixels Wi-Fi...
Page 20 iSmartEV P01 User Manual www.newsmartsafe.com Port Type B、ODBII-16、DC-IN Communication Wi-Fi, Bluetooth, USB Working Voltage DC 9~36V Working 0℃ ~50℃ temperature Storage -20℃ ~70℃ temperature...
Page 21: Initial Use
www.newsmartsafe.com iSmartEV P01 User Manual 3. Initial Use 3.1 Charge the Tablet Warning: Please use the charger that comes with the product for charging. We are not responsible for any damage or economic loss caused by charging with a charger other than the one designated by us.
Page 22: Network Connection
iSmartEV P01 User Manual www.newsmartsafe.com 3.2 Turn On/Off 3.2.1 Turn On Press and hold the power button on the device until the screen lights up. 3.2.2 Turn OFF Press and hold the power button on the device until the shutdown prompt dialog box pops up on the screen, tap Power off to shut down the device or tap Restart to restart the device.
Page 23 www.newsmartsafe.com iSmartEV P01 User Manual On the main interface, tap Other -> Personal Center -> Login, and the following dialog box will pop up: (If you are a new user, follow Section A.) (If you are registered, please refer to Section B for login.) (If you forget your password, please refer to Section C to reset it.) A.
Page 24 iSmartEV P01 User Manual www.newsmartsafe.com Enter the product serial number and activation code. The product serial number and activation code can be obtained from the password envelope in the package box. Note: If you skip the activation step here, you can also go to Other ->...
Page 25 www.newsmartsafe.com iSmartEV P01 User Manual tap OK to enter the software update interface. On the software update page, tap Update to start downloading. After the download is complete, the system will automatically install the software. Note: During the update, ensure that the network connection is normal.
Page 26 iSmartEV P01 User Manual www.newsmartsafe.com password and tap Login to enter the account. Prompt: The device has the user information memory function. If multiple accounts have logged in to the device, click the triangle drop-down button behind the user name input box to select the corresponding account to log in.
Page 27: Getting Started
www.newsmartsafe.com iSmartEV P01 User Manual 4. Getting Started 4.1 Main Interface and Bottom Navigation Bar 4.1.1 Main interface The main interface of iSmartEV P01 mainly includes the following functions modules: Items Description Battery This function is used for deep system Diagnose detection of the vehicle battery pack.
Page 28 iSmartEV P01 User Manual www.newsmartsafe.com Matching theft key matching function, so that the immobilizer control system identifies and authorizes remote control keys to normally use the car. One-click update of battery pack software, Update model software, operating system, client, and firmware is supported.
Page 29: Communication Settings
www.newsmartsafe.com iSmartEV P01 User Manual Icon Name and Function Description Browser-click this button the start the browser. Screenshot-click this button to capture and save the current screen image. The screenshot is saved in the Screenshots folder. VCI connection indicator-after the host is successfully connected to the VCI connector, this button lights up in green.
Page 30 iSmartEV P01 User Manual www.newsmartsafe.com 4.2.2 USB communication When the tablet and VCI connectors are connected through USB cables, the system automatically switches to USB communication mode. At this time the VCI connector icon at the bottom of the screen will light up, and the USB indicator of the VCI connector will also light up.
Page 31: Battery Diagnose
www.newsmartsafe.com iSmartEV P01 User Manual 5. Battery Diagnose This function is used to check the detailed data and fault information of battery pack, helping users to quickly determine the abnormal status and fault point of battery pack. Danger: The personnel who operate the battery pack test must wear protective equipment such as insulation gloves, insulation shoes and goggles.
Page 32 iSmartEV P01 User Manual www.newsmartsafe.com Select the vehicle model and year. 3. Select the connection method of battery pack.
Page 33 www.newsmartsafe.com iSmartEV P01 User Manual OBD Connector Diagnosis The battery pack of the vehicle was tested by connecting the iSmartEV BOX to the OBD diagnosis seat of the vehicle through an OBD extension cable. Non-standard Connector Diagnosis Connect the iSmartEV BOX and the low-voltage signal communication interface of the battery pack respectively with the battery pack special connector (optional) to test the vehicle battery pack.
Page 34 iSmartEV P01 User Manual www.newsmartsafe.com C. Jumper Diagnosis According to the wiring diagram prompted by the software, the jump-8 jumper is used to connect the iSmartEV BOX and the low- voltage signal communication interface of the battery pack respectively to detect the battery pack of the vehicle. Note: The picture here is an example only.
Page 35 www.newsmartsafe.com iSmartEV P01 User Manual the detection data. Description for screen buttons: Main Interface Click to return to the main interface. Exit Click to exit the current detection process. Click to view/save the detection report of Report battery pack. Click to refresh the current data of battery Refresh pack.
Page 36 iSmartEV P01 User Manual www.newsmartsafe.com the battery pack. Used to detect the ECU information, overall state, fault state and module data in the Battery Pack battery pack, which is convenient for the Information maintenance personnel quickly determine the fault point. Fault Code Used to read the fault code in the current Detection...
Page 37: Diagnose
www.newsmartsafe.com iSmartEV P01 User Manual 6. Diagnose This function is mainly used for vehicle diagnose. Users can use AutoDetect to quickly identify vehicle information and enter the system for vehicle diagnose, or manually select models and systems for detection. 6.1 Preparation ...
Page 38: Autodetect
iSmartEV P01 User Manual www.newsmartsafe.com For non-OBDII vehicle, proceed as follows: 1. Select the corresponding adaptor cable according to the vehicle’s DLC type. 2. Plug the non-16pin end of the adaptor cable into the vehicle’s DLC port, then connect the other end to the OBD I transfer cable, and then tighten the captive screws.
Page 39: Manual Selection
www.newsmartsafe.com iSmartEV P01 User Manual Tap Diagnose -> AutoDetect on the main interface to enable the intelligent detection function of vehicles. Some models may not be able to identify the vehicle information through the intelligent detection function. In this case, the following dialog box will pop up for the user to scan or manually input the vehicle VIN code.
Page 40 iSmartEV P01 User Manual www.newsmartsafe.com 2. Click the vehicle brand to be tested to enter the model version information interface. Here we take Demo (Version 15.43) as an example to demonstrate how to diagnose a vehicle. Screen Button Description: Click to view the current vehicle models Vehicle Coverage that can be tested.
Page 41 www.newsmartsafe.com iSmartEV P01 User Manual 4. Select vehicle brand and model. Here we take VW as an example. 5. Select the scan option that need to perform.
Page 42 iSmartEV P01 User Manual www.newsmartsafe.com The system supports two display modes: topological diagram and list. User can also tap ADAS Calibration to perform ADAS related test options of vehicles . Note: The specific system and special functions provided depend on the vehicle type. 6.4.1 Smart Scan This function is used to quickly detect the vehicle and output the vehicle health report directly (this will only be displayed for the...
Page 43 www.newsmartsafe.com iSmartEV P01 User Manual The system with fault codes will be displayed with red background, and the specific number of fault codes will be displayed. Click on a single system to view specific fault information. No fault system will be displayed with green background.
Page 44 iSmartEV P01 User Manual www.newsmartsafe.com Click to select the report type from the drop- down list, then enter the details and tap OK. Note: Diagnostic reports can be classified into Pre-Repair Report, Post-Repair Report and Diagnostic Scan (if no comparison is required, you can select Diagnostic Scan).
Page 45 www.newsmartsafe.com iSmartEV P01 User Manual the Other -> Reports -> Diagnostic tab. Click to select the report before maintenance. By comparing the reports before and after maintenance, the maintenance technician can clearly understand whether the fault codes found before maintenance have been completely cleared after maintenance.
Page 46 iSmartEV P01 User Manual www.newsmartsafe.com equipped with. Tap System Scan on the test option selection interface, and the system starts to scan the vehicle system. After the scan is completed, the screen will display the scan results. The user can manually select the vehicle electronic control system to perform the test function operation.
Page 47 www.newsmartsafe.com iSmartEV P01 User Manual Warning: Reading a diagnostic trouble code while troubleshooting a vehicle is only a small step in the diagnostic process. The vehicle DTC is only used as a reference, and parts cannot be replaced directly on the basis of the given DTC definition.
Page 48 iSmartEV P01 User Manual www.newsmartsafe.com Save the current test result as a test report. Report All test reports are stored in the Other -> Reports tab. Clear Fault Code This function is used to clear fault codes stored in the ECU of the system under test.
Page 49 www.newsmartsafe.com iSmartEV P01 User Manual Screen Button Description: Select All Select all data stream options. Click to cancel all the selected data stream Unselect options. Confirm the current operation. Tap OK, the system will display the dynamic data of the selection.
Page 50 iSmartEV P01 User Manual www.newsmartsafe.com Note: 1. Click , the left popup will appear on the screen: Users can set different display styles for each data stream option according to personal preferences. B Indicates that the current data stream will be displayed in bold. A Indicates that the current data stream will be displayed in red.
Page 51 www.newsmartsafe.com iSmartEV P01 User Manual the screen . Note: The waveform can be zoomed in or out. Tap the screen with two fingers (thumb and index finger, for example), then slide the fingers to adjust the distance between the fingers to zoom in and out of the screen .
Page 52 iSmartEV P01 User Manual www.newsmartsafe.com 6.4.3 Choose to Scan This function is used to select the vehicle electronic control system required by the user for scanning. In the test option selection interface, check the check box in front of the system to be scanned, and then tap Choose to Scan to start scanning the selected system.
Page 53: Adas Calibration
www.newsmartsafe.com iSmartEV P01 User Manual 7. ADAS Calibration The ADAS calibration function is used to calibrate driver assistance systems with various cameras and radars, such as front-facing cameras for lane departure warning systems, and radar sensors for ACC (Adaptive Cruise Control), etc. 7.1 Activate ADAS Calibration Function The ADAS calibration function on the device is disabled by default.
Page 54: Start Calibration
iSmartEV P01 User Manual www.newsmartsafe.com (3) Scrape the coating area of the ADAS activation card to display the activation code. Enter the 24-digit activation code, and then tap Activate to activate the ADAS function. (4) After successful activation, the calibration function of ADAS can be used normally.
Page 55 www.newsmartsafe.com iSmartEV P01 User Manual sure that the VCI connector is connected to the vehicle diagnosis seat and the Bluetooth communication between it and the host is normal. 7.2.1 ADAS System Selection Use this function to select the ADAS system that requires ADAS calibration.
Page 56 iSmartEV P01 User Manual www.newsmartsafe.com and System List. Tap Start Scanning to scan the ADAS system one by one. After scanning is completed, click the system displayed in red (the system is displayed in red, indicating that there is a fault code in the system) to view the fault code, and click the system that works normally (the system is displayed in green, indicating that the system works normally) to perform other diagnostic functions.
Page 57 www.newsmartsafe.com iSmartEV P01 User Manual Tap OK to save the ADAS report. All ADAS reports are stored under the Other -> Reports -> ADAS Reports tab. 7.2.4 Health Report After the calibration of the ADAS system, use this option to perform a full vehicle scan to confirm that the vehicle fault code has been cleared.
Page 58: Special Functions
iSmartEV P01 User Manual www.newsmartsafe.com 8. Special Functions This module provides the quick entry for commonly used special function operation, including Reset, Brake Reset, maintenance lamp returns to zero, steering angle learning, battery replacement, ABS exhaust, throttle learning, tire pressure reset, DPF regeneration, wave case learning, gear learning, headlamp matching, electronic water pump start, engine power balance, anti-theft matching, high pressure accumulator health...
Page 59: Steering Angle Calibration
www.newsmartsafe.com iSmartEV P01 User Manual time, so as to turn off the service lamp and enable a new driving cycle. 8.4 Steering Angle Calibration This function enables you to reset the steering angle, after replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body.
Page 60: Tire Pressure Monitor System Reset
iSmartEV P01 User Manual www.newsmartsafe.com regulating throttle (or idle engine) to adjust the amount of air intake. Cases when throttle learning is required: 1) After the replacement of the ECU, the ECU does not store the characteristics related to the working of the throttle, so the throttle matching is required.
Page 61: Diesel Particulate Filter (Dpf) Regeneration
www.newsmartsafe.com iSmartEV P01 User Manual 8.9 Diesel Particulate Filter (DPF) Regeneration This function enables you to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.
Page 62: Motor Angle Calibration
iSmartEV P01 User Manual www.newsmartsafe.com 8.12 Motor Angle Calibration When the rotor position detected by the motor angle position sensor is different from the actual rotor field position, motor angle calibration must be performed. 8.13 Coolant Bleed Use this function to activate the electronic water pump before venting the cooling system.
Page 63: Gas Particulate Filter Regeneration
www.newsmartsafe.com iSmartEV P01 User Manual detection. 8.18 Gas Particulate Filter Regeneration After the GPF is used for a long time, fuel consumption is increased and engine output power is reduced. In this case, the GPF replacement or regeneration must be performed. 8.19 Transport Mode In order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking...
Page 64: Injector Coding
iSmartEV P01 User Manual www.newsmartsafe.com ECU. 8.24 Injector Coding This function enables you to write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder, so as to more accurately control or correct cylinder injection quantity.
Page 65: Ac System Relearn/Initialization
www.newsmartsafe.com iSmartEV P01 User Manual It is used for matching after the intelligent cruise control module is replaced or repaired. 8.30 AC System Relearn/Initialization AC system relearn/ initialization must be performed when the vehicle AC ECU or actuator is replaced or the ECU memory is lost.
Page 66: Immo Matching
iSmartEV P01 User Manual www.newsmartsafe.com 9. IMMO Matching This function enables you to perform the anti-theft key matching function, so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car. 9.1 Vehicle connection 1.
Page 67 www.newsmartsafe.com iSmartEV P01 User Manual CAS4/CAS4 + anti-theft system module. Tap IMMO Matching and select BMW as the vehicle brand. Check that the VCI, vehicle and iSmartIMMO G3 are correctly connected according to the prompts in the software picture, and then tap OK.
Page 68 iSmartEV P01 User Manual www.newsmartsafe.com Tap Preprocessing to perform Read anti-theft data, Key matching and more. If it has already been preprocessed, here you can perform the relevant functions. The ECU will be upgraded in this process, and files need to be downloaded online. After preprocessing, tap OK.
Page 69 www.newsmartsafe.com iSmartEV P01 User Manual Return to the function menu and tap Key Learning. After the key information successfully read, select the unused key position and tap Key Generated By Ignition Switch. Read and display the password, and tap OK. Place a new key close to vehicle coil, tap OK, and wait for key...
Page 70 iSmartEV P01 User Manual www.newsmartsafe.com generation. After the dealer key is successfully generated, please try to start the vehicle. Now the key matching is finished and the new key is ready for use.
Page 71: Update
www.newsmartsafe.com iSmartEV P01 User Manual 10. Update When a new model is added or a new version of software is available, the system will prompt the user to update. It is recommended that the user update to the latest version in time. Tap Update to enter the following page: 10.1 Update Under the Available tab, tap Select All to select all upgradable...
Page 72: Renew Subscription
iSmartEV P01 User Manual www.newsmartsafe.com Tap the Downloaded tab, and the list shows the currently downloaded software. You can view the software version, installation package size, and software update content on this interface. 10.2 Renew Subscription If the software subscription is due or expires, the system will prompt you to renew your subscription.
Page 73: Videoscope
www.newsmartsafe.com iSmartEV P01 User Manual 11. Videoscope The function module needs to work with videoscope equipment (optional), which can perform HD videoscope operation to detect parts that are invisible or inaccessible to the vehicle. For detailed operation, please refer to the user manual that comes with the videoscope equipment.
Page 74: Messages
iSmartEV P01 User Manual www.newsmartsafe.com 13.1 Messages Tap Messages to enter the messages page, here you can see all the messages received. 13.2 Contacts Tap Contact to enter the following page. Here you can see the contact list including maintenance technicians and added friends. Enter “Username/Nickname/Serial Number"...
Page 75: Remote
www.newsmartsafe.com iSmartEV P01 User Manual Select the maintenance technician in the list to enter the interactive page. In the interactive page, you can communicate with text and voice messages, send files and pictures, invite remote diagnose assistance, etc. 13.3 Remote Tap Remote to enter the following page.
Page 76: Feedback
iSmartEV P01 User Manual www.newsmartsafe.com 14. Feedback If an unsolvable problem or diagnostic software problem is encountered during diagnosis, the user can report the problem (the last 20 test records) back to us. After receiving your feedback, we will follow up and deal with it in time, so as to improve our product quality and user experience.
Page 77 www.newsmartsafe.com iSmartEV P01 User Manual log that needs feedback, and then select the corresponding diagnostic feedback problem type. Enter the fault description and contact information of the feedback person in the text box. Then tap Submit Result to send it to us. After receiving your fault feedback, we will follow up your feedback report in time.
Page 78: Personal Center
iSmartEV P01 User Manual www.newsmartsafe.com 15. Personal center 15.1 VCI This option allows you to manage all your activated VCI devices 15.2 Connector activation This item lets you activate the VCI connector in case you ignore the Activate VCI step in process of the product sign-up. Enter the product serial number and activation code and Tap Activate.
Page 79: Profile
www.newsmartsafe.com iSmartEV P01 User Manual 15.4 Profile Use this item to view and configure personal information. 15.5 Subscription Renewal Card This item is used to check the status of the subscription renewal card.
Page 80: Units
iSmartEV P01 User Manual www.newsmartsafe.com 15.6 Units It is designed to configure the measurement unit. Metric System and English System are available. 15.7 Diagnostic Software Clear This item allows you to hide/clear the diagnostic software that is not frequently used. Note: Removing software may completely delete the software from the tool.
Page 81: About
www.newsmartsafe.com iSmartEV P01 User Manual go to Update -> Available. 15.8 About The software version information and disclaimer are included. 15.9 Login/Logout Tap Log Out button to log out.
Page 82: Other
iSmartEV P01 User Manual www.newsmartsafe.com 16. Other 16.1 Reports This option is used to view and manage saved vehicle test reports and test records. On the home screen, tap Reports to enter the following page: If the test report is saved during the battery diagnose, the report will be displayed on the Battery Diagnose tab.
Page 83 www.newsmartsafe.com iSmartEV P01 User Manual and share the report. • Tap Filter to select the report type and enter the vehicle VIN number, car series, model or customer name to filter the required from the report list. If the detected data is recorded on the read data stream screen, the detected data is displayed in the Recorded Data tab.
Page 84: Setting
iSmartEV P01 User Manual www.newsmartsafe.com Screen button description: Play back the selected data stream Graph options graphically. Play back the selected data stream Combine options in a combined form. Playback the selected data stream Value options numerically. Play back the recorded data stream Frame Playback frame by frame.
Page 85 www.newsmartsafe.com iSmartEV P01 User Manual access password before you can connect. If "Connected" is displayed, the connection is successful. 16.2.2 Bluetooth Used to set up Bluetooth communication connection. 1. On the home screen, tap Other -> Settings -> Connected Devices. 2.
Page 86 iSmartEV P01 User Manual www.newsmartsafe.com the device to automatically adjust and optimize the display brightness of the device according to the ambient light conditions. 16.2.5.3 Wallpaper This option is used to set the wallpaper picture of the device. 16.2.5.4 Screen Timeout This option is used to set the automatic screen-down time of the device.
Page 87 www.newsmartsafe.com iSmartEV P01 User Manual Used to manage Apps' access to and use of device location information. 16.2.10 Security Used for security management such as device lock screen encryption, blocking/allowing the installation of applications from unknown sources. 16.2.11 System Used to set device system information, including setting of device language and input methods, gesture, date and time parameters, backup, reset and multi-user access etc.
Page 88: File Management
iSmartEV P01 User Manual www.newsmartsafe.com Note: Keep the USB switch ON when the device uses Wi-Fi for wireless diagnosis. 16.3 File Management This module is the file and program manager. Users can access and create folders directly on the device without connecting to a computer.
Page 89: Browser
www.newsmartsafe.com iSmartEV P01 User Manual Send your ID to the other party. After the other party enters your ID in TeamViewer, tap Connect to Partner to remotely control your device. 16.5 Browser This module can be used to browse the web. 16.6 System OTA Upgrade This module is used to upgrade the system.
Page 90: Gallery
iSmartEV P01 User Manual www.newsmartsafe.com whether the current version is the latest version. If the version is the latest, the system will prompt Current version is the latest version. Note: When performing OTA upgrades, ensure that the device has at least 70% power and that no programs are running during the upgrade.
Page 91: Frequently Asked Questions
www.newsmartsafe.com iSmartEV P01 User Manual 17. Frequently Asked Questions 1. How to save electricity? Close the screen when the device is not in use. Shorten screen standby time. Reduce the screen brightness. Disable the WLAN connection if you do not need to use the WLAN.
Page 92 iSmartEV P01 User Manual www.newsmartsafe.com connector. Poor line contact of vehicle diagnosis seat. The vehicle battery itself has a serious power deficit. The detection connector is damaged. 5. How to reset the iSmartEV P01 tablet? Please reset the device according to the following procedures: On the home screen, tap Other ->...
Page 93: Fcc Warnning
www.newsmartsafe.com iSmartEV P01 User Manual FCC Warnning Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including...
Page 94 iSmartEV P01 User Manual www.newsmartsafe.com – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
Page 95: Warranty
The exclusive remedy for any automotive meter found to be defective is repair or replacement, and SMARTSAFE shall not be liable for any consequential or incidental damages.