Advertisement
Series 40 / Series 42 / Series 44 / Series 48 Pressure Sensors
Installation, Operation and Maintenance Manual
IMPORTANT
Please take a moment to review this manual. Before performing any maintenance on the pressure sensors be sure the pipeline has been
de-pressurized. The improper installation or use of this product may result in personal injury, product failure, or reduced product life. Red
Valve Co., Inc. can accept NO liability resulting from the improper use or installation of this product. If you have any questions or prob-
lems, please call the customer service department at (412) 279-0044. We appreciate your comments. Thank you for choosing Red Valve.
IOM RV06.02-1
February 2023
Advertisement
Table of Contents
Related Manuals for Red Valve 40 Series
Summary of Contents for Red Valve 40 Series
- Page 1 Valve Co., Inc. can accept NO liability resulting from the improper use or installation of this product. If you have any questions or prob- lems, please call the customer service department at (412) 279-0044. We appreciate your comments. Thank you for choosing Red Valve.
- Page 2 Red Valve sensors have very sensitive sleeves for more accurate Series 42 Sensors have a standard NPT end readings. The sleeves do not act as pressure snubbers. If a sensor connections and 1/4"-18 NPT gauge connections.
- Page 3 Teflon tape should be used on all NPT connections (end con- 10. Clean the new sleeve and body with a compatible fluid. Thoroughly clean and sterilize the Series nections and gauge connections). 44, body, end caps and sleeve. NOTE: Great care must be taken not to strip the NPT end 11.
- Page 4 Exposure to heat, extreme cold or sunlight will damage sleeves. The sleeves also should not be exposed to electrical equipment which produces ozone, because, this will damage the sleeves. Red Valve will not be liable for parts which are improperly stored. FILL PROCEDURES GRAVITY FILL 1.
- Page 5 Limited Warranty Red Valve Company (“Seller”) manufactured products, auxiliaries and parts thereof that we manufacture for a period of twenty-four (24) months from date of shipment from Seller’s factory, are warranted to the original purchaser only against defective workmanship and material, but only if properly stored, installed, operated, and serviced in accordance with Seller’s recommendations and instructions.
Need help?
Do you have a question about the 40 Series and is the answer not in the manual?
Questions and answers