Table of Contents What is PWR-SWITCH..........................3 PWR-SWITCH Features..........................4 How to use PWR-SWITCH?........................5 Certificates..............................6 Revision History............................9...
What is PWR-SWITCH PWR-SWTICH is optically isolated high voltage switch, which could be controlled with small voltage controllers like Arduino, ESP32, Raspberry Pi and etc similar devices or microcontrollers. EU style power receptable, GREEN status LED 230VAC 16A Control line...
PWR-SWITCH Features PWR-SWITCH has these features: EU style input power plug • EU style load receptacle • Input voltage from 90 up to 230VAC • Maximum load current 16A. • Maximal load power is 3500W, resistive. Note that Inductive loads like electrical motors cause •...
PWR-SWITCH have control line, which has polarity: If you want to drive PWR-SWITCH with Arduino you should connect the green termianl with “–“ to GND and the terminal with “+” to Arduino D0 pin. Here is the code to switch it on and off: void setup () { pinMode (D0, OUTPUT);...
PWR-SWITCH has CE certification and passed these standards tests: CE-EMC: EN 55032:2015 • EN IEC 61000-3-2:2019 • EN 61000-3-3:2013 + A1:2019 • EN 55035:2017 • CE-LVD: EN 62368-1:2014+A11:2017 • All tests are made in accredited laboratory and kept on file at Olimex Ltd.