Advertisement
Congratulations on your purchase, and thank you for selecting the HopRocket™ Mounting Bracket
from Blichmann Engineering™. We are confident that it will provide you years of service and many
gallons of outstanding beer. This manual will familiarize you with the assembly, operation, and
Maintenance of the HopRocket™ Mounting Bracket.
****
PLEASE READ THOROUGHLY PRIOR TO USE FOR IMPORTANT SAFETY INFORMATION
Sections labeled "Warning" can lead to serious injury or death if not followed. Please read
Warning:
these thoroughly and understand them completely before use. If you do not understand
them or have any questions, contact your retailer or Blichmann Engineering™
(www.BlichmannEngineering.com) before use. Do NOT at ANY time operate the product
until you thoroughly read and understand these instructions!
Caution:
Sections labeled "Caution" can lead to equipment damage or unsatisfactory performance of
the equipment. Please read these sections thoroughly. If you have any questions, contact
your retailer or Blichmann Engineering™ (www.BlichmannEngineering.com) before use.
Important:
Sections labeled "Important" are critical to the proper performance and life of the product.
HopRocket™ Mounting Bracket
Blichmann Engineering, LLC 2022
For replacement parts visit blichmannengineering.com/genuine-replacement-parts
HopRocket
Mounting Bracket
Assembly, Operation & Maintenance
IMPORTANT!!
– V3
™
****
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Blichmann Engineering HopRocket
Summary of Contents for Blichmann Engineering HopRocket
- Page 1 Congratulations on your purchase, and thank you for selecting the HopRocket™ Mounting Bracket from Blichmann Engineering™. We are confident that it will provide you years of service and many gallons of outstanding beer. This manual will familiarize you with the assembly, operation, and maintenance of the HopRocket™...
- Page 2 HopRocket™ Mounting Bracket is packaged unassembled to allow for more economical shipping and to reduce damage in shipment. A list of components included with your HopRocket™ Mounting Bracket follows as well as the basic tools required for assembly. Please carefully review the lists below to ensure you received all of the correct parts and have the required tools prior to assembly.
- Page 3 : Locating HopRocket™ at lowest point of brewing system fluid cycle decreases possibility of trapped air remaining in liquid line. Step Five: Insert HopRocket™ into mount. Index the Upper Frame height to fit HopRocket™. Tighten top two Hex Bolts to finger tight. : Follow Operation Step 1 to insert HopRocket™ into HopRocket™ Mount.
- Page 4 HopRocket™ and RIMS-Rocket™ are part of inline brewing system that cycle boiling liquid. CONTENTS ARE LIKELY HOT. Use caution when handling. Before mounting the HopRocket™ in the HopRocket™ Mount, verify that all HopRocket™ fittings are properly connected and free of leaks.
- Page 5 ScotchBrite™ scouring pad to remove any heavy soil deposits. Before and after each use, inspect the HopRocket™ Mount for wear or damage. If any of the HopRocket™ Mount components show signs of wear or damage discontinue use and contact your Blichmann Engineering™ authorized retailer for replacement parts.
- Page 6 HopRocket™ Mounting Bracket – V3 Blichmann Engineering, LLC 2022 For replacement parts visit blichmannengineering.com/genuine-replacement-parts...
- Page 7 A. Limited Warranty Blichmann Engineering warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. Proof of purchase is required. Blichmann Engineering’s obligation to repair or replace defective materials or workmanship is the sole obligation of Blichmann Engineering under this limited warranty.
Need help?
Do you have a question about the HopRocket and is the answer not in the manual?
Questions and answers