Connecting An S-Video Source Device - Optoma DS550 User Manual

Connecting an S-Video source device

Examine your Video source device to determine if it has an unused S-Video
output socket available:
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to
the device.
To connect the projector to an S-Video source device:
1. Take an S-Video cable and connect one end to the S-Video output socket
of the Video source device.
2. Connect the other end of the S-Video cable to the S-VIDEO socket on the
projector.
Important
If the selected video image is not displayed after the projector is
turned on and the correct video source has been selected, check that
the Video source device is turned on and operating correctly. Also
check that the signal cables have been connected correctly.
If you have already made a Component Video connection between
the projector and this S-Video source device using Component Video
connections, you need not connect to this device using an S-Video
connection as this makes an unnecessary second connection of
poorer picture quality. See
page 17 for details.
"Connecting Video source devices" on
EN-19