Initial Setup - Oppo LT-201 User Manual

DVD FUNCTION SETUP
1. SPDIF output: this item is used to set the bit stream type of the digital output.
Optional settings: Raw, PCM; Default: Raw
2. LPCM output: this item is used to set the output frequency of LPCM audio data to fit for
different power amplifiers.
Optional settings: 48K, 96K ,192K Default: 48K The output frequency is related to the actual signal
frequency. The signal of 48K cannot output that of 96K.

INITIAL SETUP

1. TV system: this item is used to set the unit's video output system.
Optional settings: Auto, PAL, NTSC; Default: NTSC
2. PBC: this item is used to set PBC state.
When playing some discs, if PBC is set On, this unit enters PBC playback mode; if PBC
is set Off, the unit plays the disc according to track sequence.
Optional settings: On, Off; Default: On
3. Audio: this item is used to set the preference audio language when playing.
4. Subtitle: this item is used to set the preference subtitle language when playing.
5. Disc menu language: this item is used to set the preference disc menu language
when playing.
Default of audio and disc menu language: English
Default of subtitle language: OFF
NOTE
Audio, subtitle and disc menu language are only effective to DVD disc.
If the disc is not recorded with the language you appointed, the unit will apply the language
that the disc appointed to play.
Select other languages: press [
and then number buttons to input the language code you desired. After input finishes, press
[OK] button again.
Preference Page
TV Type
PAL
On
PBC
ENG
Audio
Subtitle Off
Disc Menu ENG
Parental control
Off
Password
Default
Go To Preference Page
] button to move cursor to "OTHER" item, press [OK] button
34