1. Manuals
  2. Brands
  3. Fuso Manuals
  4. Trucks
  5. eCANTER
  6. Manual

Fuso eCANTER Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Body/equipment mounting
directive
Body/equipment mounting directives
Australia

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the eCANTER and is the answer not in the manual?

Questions and answers

Related Manuals for Fuso eCANTER

Summary of Contents for Fuso eCANTER

  • Page 1 Body/equipment mounting directive Body/equipment mounting directives Australia...

  • Page 2: Table Of Contents

    6.12 Handling of EV system 3.11 Optional equipment 6.13 Others 3.12 ADR/GGVS Technical threshold values for planning Vehicle overhang and technical wheelbases MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20.10. 2020 Only print out complete sections from the current version...
  • Page 3 10.3 Weight distribution table 10.4 Chassis cab drawings 10.5 Frame structure 10.6 Spring characteristic 10.7 Electrical systems 10.8 Other equipment MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20.10. 2020 Only print out complete sections from the current version...
  • Page 4 EuroVI OBD + regulation complied models MITSUBISHI FUSO Service Body/equipment mounting directives Common Section KAWASAKI, JAPAN...

  • Page 5: Introduction

    MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 6: The Aim Of These Directives

    7 Construction of bodies É 7.1 8 Electrics/electronics É 8.1 9 Calculations É 9.1 10 Technical data É 10.1 Appendix Index MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 7 MITSUBISHI FUSO TRUCK & BUS CORPORATION The illustrations below explain the difference between "Basic vehicle" and "Body": N00.00-3192-00 Basic vehicle N00.00-3193-00 Body MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 8: Symbols

    This symbol indicates the item on which you will find further information on the subject. These items are cross-linked in the PDF file. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 9: Vehicle Safety

    Notes on vehicle safety MITSUBISHI FUSO recommends using appropriate parts only for each particular vehicle model. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 10: Operational Safety

    Malfunctions in the electronic systems could seri- ously jeopardize the operating safety of the vehicle. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 11: Accident Prevention

    The manufacturer of the attachment, body, equip- ment or conversion or the device manufacturer is responsible for compliance with these laws and regulations. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 12: Note On Copyright

    All the text, illustrations and data contained in these body/equipment mounting directives are protected by copyright. If you have any questions, contact the department responsible É 2.1. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 13: General

    2.1 Technical advice and contact persons 2.1 Technical advice and contact persons Please log in from the following BODYBUILDER PORTAL URL and contact us. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 14: Product Safety

    MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 15 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 16: Ensuring Traceability

    Similarly, it is also advisable to store the addresses of your customers for this purpose and to grant subsequent purchasers the opportunity to register. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 17: Mitsubishi Three Diamonds And Fuso Emblem

    • If you have any question, contact the department responsible É 2.1. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 18: Trademarks

    For details of the location and method of applying labels and marks, refer to "10.8 Other Equipment" É 10.8.2. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 19: Recycling Of Components

    • In the case of plastics, and composite materials in particular, only compatible substances within one material family are to be used. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 20: Quality System

    • Is the test equipment systematically monitored? • Is there a system for labelling materials/parts? • Are quality assurance measures carried out at suppliers? MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 21: Issue Of Letter Of No Objection

    MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 22 The extent of testing required is defined by the relevant department of Daimler and MITSUBISHI FUSO development. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 23: Planning Of Bodies

    • Any item which interferes with the camera’s field of view exists near the camera. • Any equipment (snowplough, etc.) is attached in front of the vehicle. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 24: Vehicle Modifications

    Drive the vehicle and confirm that there is no unusual vibration or noise and also that the vehicle perfor- mance is stable. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 25: Dimensions, Weights, Overall Vehicle Height

    The technical data can be found in the vehicle documents or on the vehicle model plate. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 26 Maximum total width of vehicle 2550 mm MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 27: Vehicle Type Identification Data

    Maximum permitted laden mass of the vehicle Maximum permitted laden mass of the combination Maximum permitted load mass for 1st axle MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 28: Tires

    • wheel and tire clearance can no longer be guaranteed • the brakes or components of the suspension system can no longer function correctly. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 29: Bolted And Welded Connections

    Section 5 "Damage preven- tion" É 5.2 and Section 6 "Modifications to the basic vehicle" É 6.1. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 30 Section 5 "Damage preven- tion" É 5.2 and Section 6 "Modifications to the basic vehicle" É 6.1. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 31: Soundproofing

    In Germany, the EC Directive 70/157/EEC or Article 49.3 of the German licensing regulations (low-noise vehicles) must be observed. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 32: Maintenance And Repairs

    Maintenance and repair of the vehicle should not be made unnecessarily difficult by the body. Maintenance points and major assemblies must be easily accessible. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 33 • Close all air inlets and set the heating system to "Off". • Remove the battery and store it in accordance with the manufacturer's specifications. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 34 Additional information Further details are available from an Authorized MITSUBISHI FUSO dealer. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 35: Advanced Emergency Braking System (Aebs)

    Mask these parts and components before starting painting to protect them against paint spray. Remove radar unit if forced drying around radar unit. • Contact a MITSUBISHI FUSO authorized Distributor to have calibration of radar if radar unit removed. • Change to new radar unit if radar get damaged due to fallen •...

  • Page 36: Lane Departure Warning System (Ldws)

    • Change to new camera unit if camera get damaged due to fallen • Do not put any equipment in front of camera view area (fig. radar view area). MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 37: Optional Equipment

    • When adding or replacing a lighting unit, be sure to mount one that complies with the applicable laws and regulations, and observe the regulations governing visibility. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 38: Adr/Ggvs

    If it is required and cannot be avoided, contact the department responsible. See É 2.1. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 39: Technical Threshold Values For Planning

    • Comply with the minimum front axle load É 4.3. • Take the weight of special equipment into consid- eration when making calculations. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 40 N60.10-2256-00 i Additional information R=Wheel base U=Rear overhang All national laws, directives and registration requirements must be complied with. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 41: Weight Distribution, Cog Height, Anti-Roll Bars

    The vehicle body/equipment manufacturer/ converter is responsible for the safety of the vehicle in the case of these bodies. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 42: Steerability

    Property damage The permissible front axle load must not be exceeded. Observe the notes on product safety É 2.2. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 43: Clearance For The Basic Vehicle And Bodies

    Surrounding part of the propeller shaft and the rear axle Min. 25 mm of the surrounding part. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 44 B and C listed in 10.6 "Differential and tire bound height" É 10.6.2. C+30 N88.10-2030-00 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 45 • Make sure that there is sufficient space for tilting Refer to "10.4.3 Cab side view" É 10.4.3. Cab tilting range clearance MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 46: Permissible Load On Cab Roof

    50 kg. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 47: Vehicle Body Incline

    Tw = ΔHf – ΔHr = (H1 – H2) – (h1 – h2) Target: | Tw | 10 mm ≤ N60.00-2259-00 h2 Left rear h1 Right rear MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 48 Right falling Rear Right rising Right rising Twist correction (in the case of : | Tw | > 10 mm) MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 49 (spring is above the axle) is different from that for an under-slung vehicle (spring is beneath the axle). MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 50 Unit: mm Tilt Number of | Hf | or | Hr | spacers 10 to 14 14 to 18 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 51 (the tilt will be corrected by approxi- mately 5 mm). MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 52: Others

    Short Long N88.70-2047-00 Inside Outside Dimensions for type 2 Unit: mm STAY LENGTH Short Middle 297.5 Long N88.70-2050-00 Inside MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 53 Inside Set 2370 to 2550 * Consult an authorized MITSUBISHI FUSO dealer if the body width is not within the ranges shown above. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 54: Damage Prevention

    Comply with all national regulations and laws. i Additional information Further information on brake hoses can be found in 6.11 "Brake systems" É 6.11. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 55: Welding Work

    • Avoid welds in bends. • The distance from a weld to the outer edge should always be at least 15 mm. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 56 • Make symmetrical beads to limit shrinkage. • Avoid more than 3 welds at any one point. • Avoid welding in strain hardened zones. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 57: Corrosion Protection Measures

    (1), production (2) and materials (3) must be perfectly matched. Materials Corrosion protection Design Production Optimum corrosion protection MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 58 Two-component epoxy primers are paint in sufficient coatings have proved satisfactory particularly suitable for repair work. for this purpose. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 59 These must be fitted with additional drainage holes or gaps in the weld seam. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 60: Bolted Connections

    620 to 830 {33 to 44} {29 to 39} {62 to 83} {55 to 73} {72 to 96} {63 to 85} MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 61 320 to 430 {33 to 44} 290 to 380 {29 to 39} 600 to 810 {62 to 83} 540 to 720 {55 to 73} MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 62 21 to 31 {2.1 to 3.1} 20 to 29 {2.0 to 3.0} 38 to 56 {3.8 to 5.5} 35 to 51 {3.5 to 5.2} MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 63 For this reason, electrochemical corrosion must be prevented by insulation or by treating the components accordingly, or it can be minimised by selecting suitable materials. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 64: Painting Work

    • Brake hose and brake associated parts • Various vinyl tubes and identification tape • Breathers on axles, etc. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 65 • The surfaces must be roughened before repainting, otherwise the paint layer might adhere poorly. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 66 Dai Nippon Toryo Propeller shaft RM chassis super black Dai Nippon Toryo Spring Spring black No. 1000 Dai Nippon Toryo MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 67 (Sanding procedure: Sand the surfaces uniformly with #400 sandpaper until the gloss disappears from the surface.) MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 68 Carry out repair-painting using arcadia silver (CTH10090) or warm silver (AC17130) paint, by means of the following procedure. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 69 Paint used: Primer surfacer STX-2K-HS 2-liquid type paint hardener 25 % 2-liquid type paint thinner 10 % (STX-2K-TH-0D) MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 70 NK-2 produced by ANEST IWATA Corporation. For details, please address inquiries to an authorized MITSUBISHI FUSO dealer. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 71 • Wax spray can (Nihon Parkerizing Co., Ltd.) Neo • Chlorinated hydrocarbon lider • Industrial soap • Unigold • Car Spray 99 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 72 If it is installed without removing the paint, the thick paint coating could lead to loose wheel nuts. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 73: Chassis Springs

    • Before carrying out welding work, cover the spring leaves to protect them against welding spatter. Do not touch springs with welding electrodes or welding tongs. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 74: Tilting The Cab

    "Tilting the cab" section in the detailed Instruction Manual. You could otherwise fail to recognize dangers, which could result in injury to yourself or others. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 75: Towing And Tow-Starting

    Property damage Failure to observe the instructions in the Instruction Manual can result in damage to the vehicle. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 76: Risk Of Fire

    Appropriate caps, seals and covers must be installed on the body in order to avoid the risk of fire. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 77: Electromagnetic Compatibility (Emc)

    ISO/TS 21609 must be observed. i Additional information Observe the notes on operational and vehicle safety (É 1.3) and (É 1.4). MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 78: Storing And Handing Over The Vehicle

    É 3.8.4. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 79: Modifications To The Basic Vehicle

    MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 80 – Brake booster – Vacuum tank – Wheel bolt – Wheel nut – Spring bracket – Spring U-bolt – Propeller shaft MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 81: Chassis Frame Material

    Frame section modulus" É 10.5.2. For further information of the material, refer to "7.1.1 Body mounting methods" É 7.1.1. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 82: Drilling Work On The Vehicle Frame

    • After drilling deburr all holes. 5 0 m N31.00-2208-00 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 83 DIA 9 mm max DIA 13 mm max (Web surface) 25 mm min Side rail 20 mm min Gusset MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 84: Welding Work On The Vehicle Frame

    7.2 "Mounting Frame" É 7.2. i Additional information Further information on welded connections can be found in Section 5 "Damage prevention" É 5.2. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 85: Modifications To The Wheelbase

    MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 86: Frame Modifications

    (b) Short weld beads are more likely to crack due to low hardening rate, so in areas requiring many short weld beads, perform continuous welding instead. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 87 N31.00-2213-00 Finish surface with a grinder Eliminate any steps Finish end face with a grinder MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 88 Never drill or grind any notches in the side rail, cross member flange, or cross member gusset. Notches are not allowed Side rail Cross member gusset Cross member MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 89: Mounting Of Implements And Auxiliary Components

    All national laws, directives and registration require- ments must be complied with. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 90 (clamped tire-carriers) (g) Take care to prevent injury when hoisting tires. (hoisted tire-carriers) MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 91 As a result of this test, the carrier device must be free from detrimental looseness. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 92 • On chassis with standard bore holes for mudguard brackets, use these bore holes to secure the brackets. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 93 (widest axle is authoritative) • cross member section height at least 100 mm. • edge radius at least 2.5 mm. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 94 400 mm. 700-1000 max.100 a = Rear axle width = Load application points MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 95 If the vehicle has airbags, they must be properly removed. The installation of front-mounted implements must be co-ordinated with the department responsible (É 2.1). MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 96: Cab

    É 2.1. • The content relating to Mitsubishi three diamonds and Fuso emblem must be complied with É 2.4. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 97 Fig. 1 Section A-A 1664 (Wide cab) Section B-B 1364 (Standard cab) 1694 (Wide cab) Detail C 1394 (Standard cab) MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 98 32.5 (Standard cab) roof top roof top 1664 (Wide cab) 1694 (Wide cab) 1364 (Standard cab) 1394 (Standard cab) MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 99 Roof deck or drag foiler Rubber packing Bolt and washer: Left/right total 8 places (For roof deck or drag foiler) MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 100: Seats And Bench Seat

    (belt checks, tensile tests) is required as part of an endorsement check carried out by the department responsible É 2.1. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 101: Installation Of Propeller Shafts

    • Make sure that the marks are aligned on the propeller shafts during installation. • Eliminate any vibrations, e.g. by optimizing the propeller shaft angles. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 102 = ß Upper = Z-type offset Lower = W-type offset Angles in two planes (three-dimensional offset) ß = ß MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 103: Brake Systems

    • Be sure not to alter ESP-associated devices, sensors, harnesses or connectors in any way. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 104 ISO flare type Unit: mm R 0.45 0.15 R1 (0.04) N42.50-2019-00 N42.50-2020-00 This surface must be smooth Fig. 1 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 105 R shown in the table below. Unit: mm Nominal Bend radius diameter 4.75 4.76 6.35 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 106 • Position the brake lines so that they are not closer than 15 mm to sharp edges of the frame or other parts. (Fig. 5) MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 107 Loosen the flare nut completely, adjust the mating surfaces, re-thread the nut and then tighten it completely. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 108: Handling Of Ev System

    High-voltage may be generated in the high-voltage circuit regardless of the vehicle condition when the EV system is abnormal (illumination of the EV warning lamp). MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 109 Handle it with care; otherwise, an electrical shock, leakage, or breakage may result. The high voltage equipment includes the following: MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 110 ("READY indicator" illuminates on the instrument panel when the key is turned ON.) before and after body mounting work. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 111 • Vehicle demonstration at exhibitions for flat bed, box, damp, etc. 12 V tail gate lifter bodywork • Replacement of high voltage parts MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 112 Special tool Part Symbol Name Shape Purpose number Voltage High shutoff voltage MH064920 work/ break out restart work MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 113 • Press in the high voltage shutoff switch. • Securely connect to the blind plug socket of the high voltage battery. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 114 • Using a voltmeter, check that the high voltage system is not energised (by measuring the voltage via Reference value Less than DC 5V MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 115 If you worked on three or more high voltage units, add the report by signing and attaching it. 601981 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 116 Socket • Check all the items and record the vehicles in the report. 511794 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 117 Remove the connection to the 12V battery. Time Wait for 5 minutes or longer. Time Proceed to the second page MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 118 Change the sign from “High voltage vehicle. Danger: high voltage” to “High voltage vehicle. Shutting off the high voltage” This vehicle is ready for servicing. Comment Date/time Place Sign - Electricity or high voltage specialist MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 119 (the resistance of the non-painted portion of the frame shall be less than 40 mΩ at 2 A or higher). MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 120 Check all the items and enter the numeric values. This vehicle is ready for servicing. Comment Date/time Place Sign - Electricity or high voltage specialist MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 121 Mitsubishi Fuso dealer for receiving appropriate support. (b) The high voltage battery shall not be used for any other purposes than intended. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 122 When adding a wire or pipe for installing custom-built body, do not clamp it together with a high-voltage cable. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 123: Others

    (b) Do not remove any SRS air bag system parts. related to body-building at a location that is on and higher than the steering wheel. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 124 (m)After the work has been completed, use the SRS air bag warning to check that the system functions properly. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 125 10 Passenger-side airbag module Air bag module 11 Airbag control unit Seat belt with pretensioner on driver's seat side 12 SRS warning MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 126 Doing so could cause false alarms or malfunctions. Do not install a license plate frame (number plate frame). MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 127: Construction Of Bodies

    Appropriate caps, seals and covers must be installed on the body in order to avoid the risk of fire. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 128 • The frame stress should be less than the values shown in the table below. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 129 88 {9.0} or less paved roads Vehicles mainly driven on 54 {5.5} or less 64 {6.5} or less rough roads MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 130: Mounting Frame

    (e.g. platform and loading tailgate), the larger of the specified moments of resistance must be taken to determine the mounting frame. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 131 Additional information (A) indicates the part of the frame assembly that has been enlarged (wide cab: 750 mm assembly width). MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 132 U-bolts. N31.20-2118-00 Use double nuts Mounting frame Chassis frame U-bolt Pipings Misalignment stopper MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 133 CAB BACK Extend the front end of the mounting frame as far forward as possible; less than 300 mm MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 134 Mounting bracket Use double nuts Mounting frame Tighten the bolts and nuts in more than two locations. Chassis frame MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 135 Extend the front end of the mounting frame as far "l" must not be less than 2/3H(two thirds of "H") forward as possible; less than 115 mm MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 136 Less than 300 mm Cut off Obliquely "h" should be between a fourth and a fifth of "H" Left open MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 137 "h" should be 2 to 3 mm "I" should be 50 to 70 mm This corner should be ground smoothly MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 138 • If, for the sake of a low deck design, the mounting frame and the cross sill must be arranged on the same plane, pass the cross sill member through the mounting frame. N31.20-2128-00 Mounting frame Cross sill Chassis frame MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 139: Mounting Frame Attachment

    Therefore, it is required that a retainer be used together for that purpose. U-bolt Mounting frame Chassis frame MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 140 This offers a strong holding force in the longitudinal direction but is inferior to a U-bolt or opposed bracket in vertical and lateral holding forces. Set plate Mounting frame Chassis frame MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 141 • Do not attach any fastener in the mounting frame front end section where the sectional shape is different from the remaining part. Mounting frame Do not attach a fastener in this section. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 142 N31.20-2139-00 Cross member Gusset Stiffener Do not attach fastener in this area MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 143: Others

    MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 144: Electrics/Electronics

    Additional information Observe the notes on operating safety and vehicle safety in Section 1 "Introduction" É 1.3 and É 1.4. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 145 Battery 12 V Option output Battery 24 V i Additional information Some vehicles optionally use two 100AH-760A batteries without equalizer. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 146 • It is forbidden to cut, strip or splice wires or modify connectors or fuses in the existing harness instead of using the connectors intended for building the body. Refer to É 8.4.1 and É 8.4.2. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 147 12 V battery. disconnecting the cables from the 12 V, 24 V and negative terminals of the battery. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 148 Use exteme care of spattering (sparks, etc.) thrown on the harnesses during the welding work. Ground the welder near the weld. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 149 Acc relay Vehicle with battery equalizer: 24 V Ignition relay Vehicle without battery equalizer: 12 V MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 150 (c) Remove or paint the cover of the signal detection and actuation module control unit. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 151 For details, ask the department responsible. É 2.1 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 152 "8.1.2 Signal detection and actuation module-related parts" É 8.1.2. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 153: Electric Wiring

    Cable size: 0.85 mm Base color: Blue (no stripe color) Cable size: 1.25 mm Type of cable: AVX line MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 154 "f" suffixed to nominal sectional area stands for "flexible." Use flexible cables in vibrating and crooked areas, such as at the cab to chassis and transmission. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 155 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 156 Secure the following clearances. Unit: mm Minimum Location clearance Between moving part and wiring Between sharp edge and wiring MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 157 They may be damaged by feet put on the frame or stones flying to the frame during running. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 158 Unit: mm Harness diameter Limit of spacing Up to 5 Up to 300 5 to 10 10 to 20 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 159 • When passing electrical wiring through the cab floor, use the grommets in the area A and B shown below. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 160 Especially, when wires of chassis harnesses (all harnesses outside of the cab) are extended, properly protect joints against water and insulate them. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 161 When wiring from the custom-built truck body side is grounded to the frame, do the same as described in [If grounding point is relocated] above. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 162 24 V When the vehicle uses two batteries, a 24 V power supply fuse is installed. When the vehicle uses one battery, a 12 V power supply fuse is installed. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 163 *: The power supply voltage differs depending upon the vehicle power supply specifications. Refer to "Power supply voltage" É 8.1.1. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 164 N54.15-2222-00 Fuse puller Fuse Wall MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 165: Handling Of Electric/Electronic Equipment

    MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 166: Power Supply

    "List of recommended combinations of fuse capacity and wire size" (É 8.4.2). MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 167 Additional fuse etc. Battery cable (+) Battery cable (–) Terminal for taking power on built body side, M8 screw Ground point MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 168 (E.g.) If the fuse used is 10 A: 10 × 0.7 = 7 (A) o A load of up to 7 A can be used. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 169 8 Electrics/electronics 8.4 Power supply 8.4.3 Mounting location of optional terminal • Inside Cab Internal view B, C MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 170 *1: Loads to be connected to the connector marked with *1 should be arranged so that the total value of the connector output in each of the cab and chassis side shall not exceed the permissible current. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 171 Genuine relay (20 A or less) Genuine switch (3 A or less) Cab harness - - - Additional wiring Chassis harness MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 172 Unit: A Alternator type Available amperage < 5 (@1 hr) All type < 300 (@30 s) MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 173: Electric Circuit Continuity Check

    N54.15-2235-00 Test bar Connector Test bar MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 174 • Take care that the test bar does not short-circuit between connector pins. In the case of electronic control units, short-circuiting could break down their internal circuit. N54.15-2237-00 MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 175: Precautions For Electric Welding

    Disconnect the cable from the positive terminal of the 24 V battery, and cover the end of the cable. Frame Gound the welding machine at a point near the wel-ding area. Welding machine MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 176 (e) For the precautions to observe concerning the SRS airbag when carrying out welding work, refer to É 6.13.1. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 177 12 V 24 V battery Equalizer battery N54.10-2341-00 Damaged ECU Welding machine To starter switch Frame Damaged ground wire MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 178: Lighting

    Be sure to peel off the tape after the lamp is installed in the correct position. Do not array the lamp vertically. MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 179 Cab with standard width Wide cab Trailing edge of reflective section of reflector Trailing edge of reflective section of reflector MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 180 Elbow point of cut-off line Tolerance of adjustment Initial optical axis Optical axis label adjustment angle 1.0% 0.57° 1.5% 0.86° MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 181 N82.10-2823-00 Fog lamp Center of lamp Aiming gear Screwdriver Vertical Lamp center Cut-off position Horizontal Cut-off line MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 182: Calculations

    + (plus) is everything behind the center of the front axle – (minus) is everything in front of the center of the front axle MITSUBISHI FUSO body/equipment mounting directives for FE Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 183 Revision record – 20. October. 2020 Newly issued Rev. code Date issued Remarks Body/equipment mounting directives <Common section> October. 2020 TL302 October. 2020 TL302...
  • Page 184 Technical data section Body/equipment mounting directives Technical data section Australia October. 2020 TL3FA...

  • Page 185: Technical Data

    Tire system Model (kg) (kg) (kW) (Nm) Forward control FEB7UERBSFA2 4 × 2 7500 205/75R17.5 tilt cab MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 186: Specifications

    Rear suspension with shock absobers and stabilizer DC/DC Electrical 12 V-210A convertor Batteries 12 Volts (100AH-760A (EN)x2) Wide, Single Crew MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 187 6000 Front Tire Capacity (kg) *1 Rear *1: At maximum information pressure (kPa, cold: Fr/Re) 205/75R17.5 124/122 … 750/750 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 188: Weight Distribution Table

    3280 1900 1380 *1: Chassis cab weight: Include oil, coolant but exclude spare tire & disc, tools and persons. MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 189 - *1 Distance from Fr. Axle Center ; +: backward, -: forward - Some items are applied as standard or inapplicable MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 190: Chassis Cab Drawings

    10 Technical data 10.4 Chassis cab drawings 10.4 Chassis cab drawings 10.4.1 Chassis cab drawings Division Model Page FEB7UERBSFA2 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 191 10 Technical data 10.4 Chassis cab drawings MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 192 10 Technical data 10.4 Chassis cab drawings 10.4.2 Cab drawings Division Model Page FEB7UERBSFA2 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 193 10 Technical data 10.4 Chassis cab drawings MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 194 B :Front axle center C :Top surface of frame to cab tilt center to cab end to cab tilt center MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 195: Frame Structure

    10 Technical data 10.5 Frame structure 10.5 Frame structure 10.5.1 Details of cross member Model Section Page FEB7 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 196 10 Technical data 10.5 Frame structure MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 197 10 Technical data 10.5 Frame structure MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 198 10 Technical data 10.5 Frame structure MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 199 10 Technical data 10.5 Frame structure MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 200 10 Technical data 10.5 Frame structure MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 201 10 Technical data 10.5 Frame structure 10.5.2 Frame section modulus Model Page FEB7UERBSFA2 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 202 10 Technical data 10.5 Frame structure MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 203 10 Technical data 10.5 Frame structure 10.5.3 Frame front drawings Frame width Front suspension type Model Page (Nominal value) Rigid FEB7 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 204 10 Technical data 10.5 Frame structure 1128 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 205: Spring Characteristic

    WEIGHT TO GROUND MODEL Front Rear Total Front Rear Front Rear ±10 Hf ±25 Hr FEB7UERBSFA2 1900 1380 3280 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 206 10 Technical data 10.6 Spring characteristic 10.6.2 Differential and tire bound height Model Tire size FEB7UERBSFA2 205/75R17.5C 1560 FEB7 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 207 10 Technical data 10.6 Spring characteristic 10.6.3 Front spring diagram MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 208 10 Technical data 10.6 Spring characteristic 10.6.4 Rear spring diagram MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 209 10 Technical data 10.6 Spring characteristic 10.6.5 Tire radius calculating diagram MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 210: Electrical Systems

    10 Technical data 10.7 Electrical systems 10.7 Electrical systems See the electrical wiring diagram section. MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...

  • Page 211: Other Equipment

    10 Technical data 10.8 Other equipment 10.8 Other equipment 10.8.1 Installing rear lamps (1) Rear combination lamp MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 212 10 Technical data 10.8 Other equipment (2) Rear registration plate lamp MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 213 10 Technical data 10.8 Other equipment MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 214 FUSO e-CANTER NOTE: Types of the label and emblem attaching on a vehicle differ depending on the vehicle types. MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 215 High-voltage shutoff switch caution label are to be stuck, peel off the backing paper from each sticker, and affix it in position according to the illustration. MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020 Only print out complete sections from the current version...
  • Page 216 Dimensions, weights, overall vehicle height ......24 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020...
  • Page 217 Intermediate post ........142 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020...
  • Page 218 Minimum clearance and notes Section behind cab ..... . 42 Mitsubishi three diamonds and Fuso emblem ......16 Model coding system .
  • Page 219 Symbols ........7 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020...
  • Page 220 Work before handing over the modified vehicle ......33 MITSUBISHI FUSO body/equipment mounting directives for eCanter Issue date: 20. 10. 2020...
  • Page 221 Revision record <Technical data section> – 20. October. 2020 Newly issued Rev. code Date issued Remarks NOTE: 1, Chapter 1-9 is Common Section for all markets and to be revised without any special notification. Therefore, please note that this version is not necessarily the latest one. 2, Chapter 10 is for specific market(s).

Table of Contents

Save PDF