Page 1
USER MANUALS Motorcycle Bluetooth helmet intercom...
Page 2
A Button/ Off Button Power Button B Button Volume + E Button F Button (A+E Button) Phone Button C Button Volume - D Button Blue LED Lights Bluetooth Intercom Bluetooth Music Auto phone receiving EUC Remote Support Mobile App Voice Assistant...
Operation Diagram Click Double-click Long-press Long press Long press for 3 seconds for 5 seconds Power ON/OFF Please charge it before using Press and hold (approx. 1s) <A Button/Power Button> until the red light comes on with a power-on tone. After switching on In standby mode, the blue light flashes slowly Single-press the <off button>.
Red and blue lights alternatly flash The other V7 enters the pairing state using the same operation step, then two V7 would pair with each other. Blue light flashing fast Wait a few more moments and you will hear the "Di,Di,Di" tone.
Page 6
Compatible with old model pairing steps Simultaneously press and hold (approx. 3 seconds) <A Button>/<B Button>/< C Button>/< D Button>/<E Button> to start pairing, the red and blue lights flash alternately. Or press and hold (for approx. 3 seconds) <A Button +E Button> (Intercom F) Alternating red and blue lights “Di,Di,Di”...
After power on, press and hold (approx. 5s) <phone button> until the red and blue lights flash alternately fast. Alternating red and blue lights flashing fast Searches the device “V7” on your phone, click it and get to connect. Pairing Blue slow speed double flashing lights successful “Di,Di,Di”...
Interruptions Recovery Incoming calls Voice assistant “Open Music” “Previous music” Voice Assistants “Next Music” “Call EJEAS” Double-click the <phone button> “Open navigation” when in standby or with music.(requires phone support) Music control Play/Pause Previous song Next song Volume - Volume +...
Handle EUC (optional) Key descriptions Pushbuttons Actions Function FM Button (V7 has no FM, so this Short press button can’t open FM) Volume - Intercom Button C Volume - Intercom Button B Previous song when Long press music is playing.
Connect the product to the PC using USB. Press and hold <Phone button> + <B button> Download and open the "EJEAS Upgrade.exe" about 2s, the red light flashes 3 times quickly to upgrade software. Click on the "Upgrade" button to delete the pairing record, and then the intercom will start the upgrade and wait for the upgrade to complete.
Mobile App First time users download and install EJEAS SafeRiding Mobile App. Press and hold (approx. 5s) <phone button> until the red and blue lights flash alternately fast. Alternating red and blue lights flashing fast Open the APP, click on the Bluetooth icon in the...
Need help?
Do you have a question about the V7 and is the answer not in the manual?
Questions and answers