Summary of Contents for NorthEast Monitoring NEMP00539
- Page 1 Gateway - FTP Technical Manual for use with NorthEast Monitoring’s DR400 Wireless Recorders Gateway 2 Part number: NEMM044-Rev-A Last updated: November 21, 2022 Copyright 2022 All rights reserved...
-
Page 2: Table Of Contents
5. Set up and test the Process 7 Set up the system as follows: 7 Test the set up: 7 Confirm set up by recording and sending event 7 Troubleshooting 7 9. Event Wireless Process Flow-chart 9 NorthEast Monitoring, Inc. NEMM044-Rev-A Page 2 of 12... -
Page 3: Introduction To Wireless Event
For • AC Adapter (NEMP00571) event transmission, the communication occurs between the recorder and a paired NorthEast Monitoring Gate- way. Wireless transmission is initiated when the DR400 Gateway Specifications is in Event recording mode and there is event data to •... -
Page 4: The Gateway
The button does the following: • short press causes a display refresh. • 3-second press to turn on. • 5-second press for clean shut down. • 30-second press for forced shut down. NorthEast Monitoring, Inc. NEMM044-Rev-A Page 4 of 9... -
Page 5: Pair Dr400 With Gateway
In order to pair a DR400 with a Gateway, your organi- If the data is incorrect or you do not have a urlkey.dat zation must obtain a urlkey.dat file from NorthEast file, contact NorthEast Monitoring or your distributor Monitoring and the urlkey file must be placed in the for assistance. -
Page 6: Receiving Events Via Ftp
Installing the Utilities capabilities: Contact Northeast Monitoring Support to get a copy of • Windows 10 or Windows 11 Operating System; the ETel installer Install the utility on a PC where the LX Event software resides. -
Page 7: Set Up And Test The Process
If not running, start the ETel utility so that you can Get a preconfigured urlkey.dat file, password and verify that the files are downloading to your local username from NorthEast Monitoring. system. Set up your FTP site using the username and pass- With Gateway turned on and in room, create a man- word. - Page 8 “cmd”. (You may need to “refresh” to see the files once they appear.) If they are there, the event decoder may not be running. Contact North- East support for assistance. NorthEast Monitoring, Inc. NEMM044-Rev-A Page 8 of 9...
-
Page 9: Event Wireless Process Flow-Chart
9. Event Wireless Process Flow-chart NorthEast Monitoring, Inc. NEMM044-Rev-A Page 9 of 9...
Need help?
Do you have a question about the NEMP00539 and is the answer not in the manual?
Questions and answers