Dimmer Function - KEKAI ALABAMA Manual

Timer Setting:
Timer can be set it between of 0-12 hours, When turn on , the
electric fireplace timing of the default is 0 hours, you can operate
the timer setting by the keypad or remote control With the TIME
button, After the electric fireplace on working, press the TIME
buttons on the keypad or on the remote control, then The
display at the temperature display in the display window changes
to "00" and is flashing, at this time, every time you press the
button of the TIME in
(00-30-1H-2H-3H-4H-5H-6H-7H-8H-9H-10H-11H-12H)change,
How long time you need it, then you stop press,
after display flashing by 10 seconds, if you not operate, the
display will be transferred back to the room temperature display
and in a constantly light state.
Temperature setting increase buttons:
Temperature setting range is15℃ (60℉)- 36℃ (97℉), ( the
default setting temperature is 22℃/72℉), press the UP button on
the keypad or remote control by each time, the temperature will
add 1℃/1℉.If long time press on keypad (don't lose the button,
the the Numbers is change) set temperature will continue to
increase until maximum.(Note that this long press function is not
available on the remote control.) When on temperature setting,
the temperature display window is in a flickering state. After 10S
no operate the set temperature button, then the display window
will be turned back to the room temperature display and in a
constantly bright state .
Temperature setting decrease buttons:
Temperature setting range is15℃ (60℉)- 36℃(97℉), ( the
default setting temperature is 22℃/72℉), press the DOWN
button on the keypad or remote control by each time, the
temperature will reduce 1℃/1℉.If long time press on keypad
(don't lose the button, the the Numbers is change) set
temperature will continue to decrease until the minimum.(Note
that this long press function is not available on the remote
control.) When on temperature setting, the temperature display
window is in a flickering state. After 10S no operate the set
temperature button, then the display window will be turned back
to the room temperature display and in a constantly bright state.

DIMMER FUNCTION :

The flame brightness is on the brightest mode by first time. The
flame brightness is have five levels. If you need to adjust the
flame brightness, every time you press the DIMMER button, the