Operation Of The Led Searchlight; Handheld Wireless Remote; 6.1.1 On / Off; Function Button "Fn - 1st-Relief 220S Series Manual

Manual
6

Operation of the LED Searchlight

6.1

Handheld Wireless Remote

6.1.1 On / Off

Press button to Switch on or off searchlight.
When turning off, the light will automatically return to home position.
If you wish the light to stay at the same position, simply quickly press this button again
to stop auto home feature.
Operate directions of the light beam by pressing the direction buttons.
Up =
6.1.2 Function Button "
The Button "Fn" is the triggers the dual speed function (Fast or Slow speed).
6.2

Reset Home position after disconnected from DC Power

If LED Searchlight is disconnected from DC Power (wires disconnected from battery or power
supply switched off), make sure after reconnected DC Power to
(1) Turn on the searchlight, using wireless or wired remote control.
(2) Make a full 360 rotation, in order to reset the home position memory.
6.3

Handheld wireless remote programming procedure

(1) Switch off DC Power or disconnect from battery.
(2) Make sure there is NO other transmitter operating at the same time.
(3) Switch on DC Power, within 5 seconds press and hold Remote up ▲ and
down ▼buttons simultaneously.
(4) Searchlight will flash to acknowledge the Remote, connection has been
made.
(5) To program the second Remote (up to 4 remotes may be used with the
searchlight, programming a fifth will replace the first), within 5 seconds after
the first Remote programmed, press the second Remote up and down
buttons or repeat step 1.
6.4

Enjoy

Enjoy the usage of your 6-inch Wireless Control LED Cabin Searchlight.
FN: 552603b (LG f. ZRS Graz)
VAT No.: ATU76757859
Down =
Fn "
page 7 of 9
Bank: RB Graz-Mariatrost
Swift/BIC: RZSTAT2G223
IBAN: AT08 3837 7000 0420 9185
Right = Left =
Handbuch 220S EN 1_0.docx
1st-Relief GmbH
Schulgasse 5
8010 Graz, Austria