To secure the full 10-year product warranty, be sure to install the Wattsonic Li-LV battery modules by qualified installers. Warning: Read this entire document before installing or using Wattsonic Li-LV LiFePO4 battery modules. Failure to do so or to follow any of the instructions...
Warning: Wattsonic Li-LV battery is heavy and challenging to lift. Warning: Use Wattsonic Li-LV Battery only as directed. Warning: Do not use Wattsonic Li-LV Battery if it is defective, appears cracked, broken, or otherwise damaged, or fails to operate. Warning: Before beginning the wiring portion of the installation, first power off the inverter and then open the AC and DC disconnect switches (if applicable for the installation).
Wattsonic or a Wattsonic-certified party. Caution: Do not place Wattsonic Li-LV Battery in a storage condition for more than one (1) month, or permit the electrical feed on the Wattsonic Li-LV Battery to be severed for more than one (1) month, without placing Wattsonic Li-LV Battery into a storage condition in accordance with Wattsonic’s storage specifications.
* Compatible inverter brands: Wattsonic/ SMA SunnyIsland/ Victron/ Imeon/ Voltronic/ SolaX/ GoodWe/ SofarSolar/ Solis/ Studer. * Wattsonic reserves the right to modify the technical datasheet and apperance of the product in the cataloge without prior advice to the users. Li-LV LFP Battery Module | USER MANUAL...
Standard Packing List Li-LV LFP Battery Battery Backsheet Battery<-->Inverter Battery<-->Inverter Rj45 Communication Cable M6 Expansion Screws COM Resistor Li-LV LFP Battery Module | USER MANUAL...
Mechanical Installation Single battery installation Minimum 200mm above ground. Step-1, Confirm the Please use expansion Step-2, Hanging on the screws to fix the battery exact mounting position battery module to the backsheet on the wall of battery backsheet. mounted battery backsheet. according to the fixed position.
COM resistor is mandatory required to strength the CAN Bus signal. 2.Put on a protective cap ⑨ ⑧ ⑧ ⑩ Wattsonic standard parallel kits Maximum withstand current is 100A.If you have a larger load demand, you can choose to ⑩ configure the DC Combiner box. DC Combiner box...
Start the Battery Array Step-4, please pull on the DC Isolator The indicator light is on, showing green, and the machine is on normally. Green Normal, 30%<SOC<100% Normal, 10%<SOC<30% Flashing Green Alarm or Protection None Power Off or Sleep Li-LV LFP Battery Module | USER MANUAL...
Wuxi Wattsonic Energy Technology Co., Ltd Address: No. 200 Linghu Road, Xinwu District, Wuxi 214100,Jiangsu Province, China *Wattsonic reserves the right to modify the technical datasheet and apperance of the Website: www.wattsonic.com product in the user manual without prior advice to the users.
Need help?
Do you have a question about the Li-LV Series and is the answer not in the manual?
Questions and answers