Page 1
User Manual for ZAPI_HHC Handset Universal Handheld Console for ZAPI controllers NOCO SHOP Email: info@nocoev.com Website: http://www.nocoev.com/...
Page 2
1. Introduction a) Use The ZAPI_HHC Handset enables the user to amend the factory settings of certain ZAPI controllers. The ZAPI_HHC must be used together with the cable supplied. Remark: Drawings and images in this ZAPI_HHC Handset Manual may differ from your model b) Warnings Amending factory settings of a ZAPI controller can cause material and physical injury.
Page 3
this manual, are solely responsible for the safe and good operation of the ZAPI_HHC handset. 2. General description a) Components The ZAPI_HHC Handset consists of 2 component types: the Handset itself and the cable. i. Handset: The Handset has a display, a 6-key keyboard. ii.
Page 4
and a wall or other object. b) Discouraged use Do not use the ZAPI_HHC Handset on controllers which show severe signs of damage. 4. Commissioning and safety a) Warnings for each use Be sure that the ZAPI_HHC Handset is only used by trained staff.
Page 5
- Make sure that the industrial controller is powered off - Connect the cable to the ZAPI_HHC Handset - Connect the cable to the service connector of the controller. Refer to the service manual of your controller for the location of the service connector.