General Guidelines - ONE COYOTE T Owner's Manual

When installing, put the pillow
support into the chair frame and
make sure the lock button is locked
in the receiver hole. To adjust the
height of the pillow, please operate
the height adjust knob.
Lock Height adjust knob
Button
4.2 Unfolding
Press down the
vertically until the wheelchair is
unfolded completely. Install the
seat, back and the pillow, then fold
down the footplates.
4.3 Folding
Pivot footplates upwards to vertical
position, remove the seat, back
and the pillow, then pull up the
support bar vertically to fold the
wheelchair.
8
Figure 11
support bar
Tilt Wheelchair
OWNER'S MANUAL
5. General
Guidelines
5.1 Stability
Before using ANY recline position of
this wheelchair, make sure the rear
wheels are in the best position to
maintain the
wheelchair.
The seat height, seat angle, pivot
point of seat frame, seating system,
caster position, size and position of
the rear wheels, as well as the user
condition directly relate to the
stability of the wheelchair.
Any change
combination above may cause the
wheelchair to lose stability. These
adjustments MUST be performed by
an authorized dealer or qualified
technician.
Before using the recliner option,
make sure the anti-tipper wheel
assemblies are
adjustment hole. (Adjustment hole
closest to the ground/floor).
stability of the
to one or any
in the lowest