Selecting Xm Satellite Radio - Onkyo TX-SR806 Supplementary Manual

SETUP
Setting the Satellite Radio Mode
Before you can listen to XM Satellite Radio, you must
set the SAT Radio Mode to "XM".
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [q]/[w] but-
tons to select "7. Hardware
Setup", and then press [ENTER].
The Hardware Setup menu appears.
3
Use the Up and Down [q]/[w] but-
tons to select "3. Tuner", and
then press [ENTER].
The Tuner screen appears.
2
En-
RECEIVER
7. Hardware Setup
1. Remote Control
2. Zone2
3. Tuner
4. Analog Multich
5. HDMI
7–3. Tuner
SAT Radio Mode XM
Antenna Aiming
SURIUS Parental Lock
4
Use the Left and Right [e]/[r]
buttons to select "XM".
If there are 2 items on the Tuner
screen, use Up and Down [q]/[w]
buttons to select "SAT Radio
Mode".
Pressing the Left and Right [e]/[r]
buttons cycles through the following
options: None
XM/SIRIUS
None: Select if you're not using
XM: Select to use XM Satellite
SIRIUS: Select to use SIRIUS Satel-
XM/SIRIUS: Select to use XM Satel-
5
When you've finished, press the
[SETUP] button.
Setup closes.
TUNING

Selecting XM Satellite Radio

On the AV receiver, press the
AV receiver
[TUNER] button repeatedly to
select "XM".
On the remote controller, press
Remote
controller
the [TUNER] button repeatedly to
select "XM".
If "CHECK XM TUNER" appears on
the display, make sure the XM Mini-
Tuner is connected properly.
→ → →
XM SIRIUS
Satellite Radio.
Radio.
lite Radio.
lite Radio and SIRIUS Sat-
ellite Radio.
, TUNING
TUNER