Features & Controls; Control Functions - MASSEY FERGUSON Simplicity Lancer Series Operator's Manual

Features & Controls
NOTE: Steering wheel
removed for clarity
Duel Lever
Models
Single Lever
Models
Please take a moment and familiarize
yourself with the name, location, and
function of these controls so that you will
better understand the safety and operat-
ing instructions provided in this manual.

CONTROL FUNCTIONS

The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing
require the combined use of several controls applied in specific sequences. To learn what combination and sequence
of controls to use for various tasks see the OPERATION section.
Throttle/Choke Control
(Single Lever Models)
The throttle/choke lever controls engine speed and
choke. Move the throttle forward to increase engine
speed and back to decrease engine speed. Always
operate at FULL throttle. Move the control fully forward
(past the detent) to close the choke. Close the choke for
cold starting. Open the choke once the engine starts. A
warm engine may not require choking.
Throttle Control
(Dual Lever Models)
The throttle controls engine speed. Move the throttle for-
ward to increase engine speed and back to decrease
engine speed. Always operate at FULL throttle.
Choke
(Dual Lever Models)
Close the choke for cold starting. Open the choke once
the engine starts. A warm engine may not require chok-
ing. Move the lever forward to close the choke.
10
Figure 1. Tractor and
Mower Controls