Page 2
Where applicable, cautions and warnings are used throughout this manual to ■ draw your attention to safety precautions to be taken. Internet Check Océ on the internet at www.oce.com for: the latest drivers ■ product development ■...
Printer operator panel 20 Display 20 Menu level indicator 20 Keys 21 How to turn on and turn off the Océ TDS300 printer 22 Cancel a print 22 Menu structure 23 Media type and size on the printer 23 Manual feed 24...
Page 4
The keys 39 The display 40 Menu level indicator 41 Copy jobs 42 Turn on and turn off the Océ TDS300 scanner 43 Start the copy process 43 Make copies 44 Number of copies 45 Select the use of roll 1 or roll 2 or manual feed 45...
Page 5
Clean the glass platen and the reference roller of the scanner 98 Appendix A Summary and tables The Océ TDS300 102 Printer operator panel 103 Scanner operator panel 104 Product specifications Océ TDS300 105 List of available material types and sizes 109...
Page 6
Symbols 116 Instructions for safe use 117 Safety data sheet for the Océ TDS300 119 Safety data sheet Océ TDS300 printer 120 Safety data sheet Océ TDS300 printer and scanner 121 EPA Energy Star® 122 Appendix C Miscellaneous How to read this manual 124 User survey 125 Addresses of local Océ...
Océ TDS300 User Manual Chapter 1 Introduction This chapter describes the main features, the options and the software applications provided with the Océ TDS300 system.
The Océ TDS300 The Océ TDS300 is a wide format, black and white, multifunctional system. The Océ TDS300 offers a range of print and copy functionality. The system includes a printer (1 or 2 rolls) a controller and an optional scanner.
Note: sizes’ on page 109. The Océ TDS300 printer is a LED printer with a resolution of 600 DPI and a printing speed of 1.8 A0 or 3 meters per minute. You can perform a number of activities at the Océ TDS300 printer. You can set the media type and size, stop a print job or select your preferred language from the printer operator panel (see chapter 2, ‘Use the Océ...
The spool memory allows many users to send the print jobs to the Océ TDS300 at the same time. The print jobs are put in the print queue where they wait to be printed. The job that is put first into the queue is printed first.
Page 11
The size and type of the available media are indicated on the operating panel. ® ® ® The Océ TDS300 fully supports Adobe Adobe PostScript /PDF ® PostScript for all supported languages. Océ Print Exec LT is optional software to create and Océ...
Editor’ on page 67 for more information. The repro operator is responsible for the daily operations on Repro operator the Océ TDS300. The Repro Operator has no rights to change settings in the Océ Settings Editor. Typically, an anonymous user on the Océ TDS300 can be...
Page 13
Use the Océ Remote Logic to make the default key operator and system administrator settings (Océ Settings Editor). Printer drivers ■ With the Océ TDS300 one or more printer drivers can be used, including, ® ® ® Windows raster driver for Microsoft Windows...
The data flow to the Océ TDS300 Connect the Océ TDS300 to a workstation connected to a network. It accepts different standard format vector and raster data files from the host environment and converts these into high quality prints (see figure 2).
Page 15
To compose such a header, you can: Compose the header within your application. Please refer to the Océ Job ■ Ticket (OJT) manual. ® ® Use a Windows or AutoCAD HDI driver to generate both a printable file ■ (e.g. HP-RTL, HP-GL/2) and the appropriate header with RCF-commands. ®...
Set the ON/OFF switch at the rear of the printer to position ‘0’ (see figure 3). If you switch off the printer during a print job, it is possible that you lose information or that a paper jam occurs. Océ TDS300 User Manual...
Page 17
® ▼ Turn on the Océ Power Logic Controller Press the button on the front of the controller, to turn on the controller. ® ▼ Turn off the Océ Power Logic Controller Press the button on the front of the controller, to turn off the controller. Introduction...
33 and page 34 in normal mode. In off-line mode it shows the ‘off-line’ menu (see figure on page 36). Menu level indicator The menu level indicator indicates the current position in the menu. Press the Previous key to scroll through the menu. Océ TDS300 User Manual...
These two keys are used to select another mode at the same lev- el of the menu, or to display the next or previous option from the option list. Stop key The red Stop key is used to stop the current print job. Use the Océ TDS300 to print...
How to turn on and turn off the Océ TDS300 printer (see chapter , ‘How to turn on and turn off the Océ TDS300’ on page 16) Cancel a print Cancel a print before you start the print or during the print.
■ Media type and size on the printer One of the features of the Océ TDS300 printer are the 2 rolls with the automatic media change function. This function allows the printer to take another roll of the same format and copy material when the roll becomes empty when you print.
Press On-line to put the printer on-line again. Manual feed There are two possibilities to select manual feed: via remote control commands added to the print file (for example with the ■ printer drivers). choose ‘manual feed’ on the scanner operator panel. ■ Océ TDS300 User Manual...
Press Next/select to confirm the selected time-out. Press On-line to put the printer on-line again. Cut media If the material does not have a straight leading strip, you can cut the material at right angles from the roll. Use the Océ TDS300 to print...
Page 26
Feed the material until you can see the material and put the material into position (see figure 25 on page 91) and (see figure 29 on page 93). Close the drawer. Press the On-line key to put the printer on-line again. Océ TDS300 User Manual...
Press On-line to put the printer on-line again to print the menu card. Print the demo print After the installation of the Océ TDS300, you can print the demo print, to check the printer and the controller. Use the Océ TDS300 to print...
Page 28
Press Next/select to enter the ‘Print info’ menu. Select the ‘Demo print’ item with the key. Press Next/select to print the demo print Press On-line to put the printer on-line again to print the demo print. Océ TDS300 User Manual...
Turn the printer ‘off’ and ‘on’ again. Network settings The Océ TDS300 has 2 network adapters. To set the network settings you must enter the network data in 4 fields. Use DHCP server. The Dynamic Host Configuration Protocol (DHCP) is a ■...
Page 30
Enter the next numbers of the ‘IP address’ with the key. Press Next/select to confirm, the next digits flash. Enter the next numbers of the ‘IP address’ with the key. Press Next/select to confirm. Press On-line to put the printer on-line again. Océ TDS300 User Manual...
Page 31
Enter the next numbers of the ‘Default gateway’ with the key. Press Next/select to confirm, the next digits flash. Enter the next numbers of the ‘Default gateway’ with the key. Press Next/select to confirm. Press On-line to put the printer on-line again. Use the Océ TDS300 to print...
Select ‘Yes’ or ‘No’ with the key. Press Next/select to confirm the setting. Press On-line to put the printer on-line again. Turn ‘off’ and ‘on’ the controller. Diagnostic mode The Diagnostic mode is only meant for the Océ service technician. Océ TDS300 User Manual...
The paper roll 2 is empty. Roll 2 empty Reload roll 2 after the printers stops printing. Job canceled The current print or copy job is canceled Close roll unit The roll unit is open. Close the roll unit. Use the Océ TDS300 to print...
An error occurred during the cut of the roll. Remove paper Check the paper in the roll unit and remove if necessary. Press <on-line> Press <on-line>. Roll retract err Print material error when the roll unit takes back the material. Press <on-line> Océ TDS300 User Manual...
Page 35
The controller uses the English language instead of the selected using UK English language. Press <on-line> Call service. Press <on-line> Close roll unit While you printed, the roll unit opened. Rewind paper Rewind the paper. Press <on-line> Close the roll unit. Press <on-line> Use the Océ TDS300 to print...
Diagnostic mode Use DHCP server Network sett. adapter 1 IP address 123.456.789.123 Subnetmask 123.456.789.123 Default 123.456.789.123 gateway Use DHCP server adapter 2 IP address 123.456.789.123 Subnetmask 123.456.789.123 Default 123.456.789.123 gateway Installation Enter password start install. Océ TDS300 User Manual...
The icon flashes. Use the browse The Exposure key keys to change the exposure value. Select roll 1, roll 2 or manual feed. The equivalent icon is on. The Media key Use the Océ TDS300 to copy...
Use an original shorter than 15 meter. Press <cancel> Wrong orig. type This message shows when you select ‘Background compen- Press <cancel> sation’ and ‘Blueprint’ as original. Press cancel. Reset scanner Turn the scanner on and off. Océ TDS300 User Manual...
The menu level indicator indicates the current position in the menu. Press the Previous key to scroll through the menu. uppsättning kopiering inmatning utmatning extra [8] Menu level indicator on the scanner operator panel Use the Océ TDS300 to copy...
Océ Settings Editor. The Océ TDS300 cuts the paper to the length of the original, the synchro cut. If you select the standard cut mode, the copy is cut at a standard length, (see ‘Set synchro or standard cut’...
■ Turn on and turn off the Océ TDS300 scanner (see chapter , ‘How to turn on and turn off the Océ TDS300’ on page 16) Start the copy process If you press the Start key, and you do not change any settings, the settings of...
Press the green Start key to start the copy job. The original is fed into the scanner. The printer starts. Collect your output. If you make a copy within the time-out of 90 seconds, the machine will use the settings of the previous copy job. Océ TDS300 User Manual...
To have multiple copies from one original, enter the number of copies on the scanner operator panel. The original is scanned just once and the required number of copies are processed. Refer to ‘Product specifications Océ TDS300’ on page 105 for the limitation of multiple copy jobs. ▼...
Specify the zoom factor With the Océ TDS300 you can reduce or enlarge your original from 25% to 400%. Press the ‘zoom’ key to enter the zoom mode. You can select the zoom factor by means of the ‘browse’ keys when the indication flashes.
Page 47
‘Background comp. menu. Select ‘on’ or ‘off’ with the key. Press the confirm key. The Océ TDS300 allows you to adjust the exposure setting according to the type of image on the original. There are three original types available: Lines/text ■...
Enable automatic feed of the original To increase the productivity enable Automatic feed, no need to press the Start key, except for the first original. If you disable automatic feed you must press the Start key. Océ TDS300 User Manual...
Enter the type of the copy material on the printer operator panel. Press the ‘media’ key on the scanner panel to select ‘manual feed’. The indicator lights. The minimum length of the print material must be 420 mm. Note: Use the Océ TDS300 to copy...
Page 50
The printer prints the image on the side of the sheet which is facing up. Note: When you feed a sheet of material in the manual feed while a Attention: normal print job runs, a media jam can occur. Océ TDS300 User Manual...
Page 51
Select the ‘time out’ with the key. Press ‘next/select’ to enter the ‘time out’ menu. Select the desired time out with the key. Press ‘next/select’ to confirm the selected time-out. Press On-line to leave the main menu. Use the Océ TDS300 to copy...
Select ‘Paper copy’ with the key. Press key, to enter the ‘Paper copy’ menu. Select ‘cut length’ with the key. Press key, to enter the ‘cut length’ menu. Select ‘Synchro cut’ with the key. Press the Confirm key. Océ TDS300 User Manual...
The length of the selected strip is shown in the display. If the adjustment differs from the default setting, the indication lights. If you make the strip larger than the strip on the original, you can Attention: lose information. Use the Océ TDS300 to copy...
Page 54
400 mm or shortened up to 400 mm (see figure 11). Leading strip Leading strip -400 mm +400 mm Trailing strip Trailing strip -400 mm +400 mm [11] Example of adjusting the leading and trailing strip of an original Océ TDS300 User Manual...
Press the key to enter the ‘Paper copy’ menu. Select ‘Mirror’ with the key. Press the key to enter the ‘Mirror’ menu. Select ‘on’ or ‘off with the key. Press the confirm key. Use the Océ TDS300 to copy...
C+ (18x24 tum) B+ (12x18 tum) 30x42 tum Papperskopia B1+ (707x1000 B2+ (500x707 mm) B2 (500x700 mm) Poster-läge på Spegelvänd på Återspola orig. på Auto. inmatning på Skanner UK English Språk Nederlands mer... Skrv menystrktur Skriver ut... Océ TDS300 User Manual...
Océ TDS300 User Manual Chapter 4 Install and start Océ Remote ® Logic on a workstation This chapter describes how to install and start Océ Remote Logic ® on a workstation.
Introduction ® Océ Remote Logic to access the Océ Settings Editor (‘Océ Power Logic®: The Settings Editor’ on page 67) from a remote workstation. Océ TDS300 User Manual...
2000, or Windows XP. Contact your local Océ organization for more possible systems. ® You will find the Océ Remote Logic application on the Océ TDS300 ® CD-ROM and on the Océ Power Logic Controller CD-ROM provided with ® the system. The installation procedure for Remote Logic is quite simple and self-explanatory.
Page 60
‘Start’ menu. To work with Océ Settings Editor you first have to connect to an available Océ TDS300 machine. How to connect is described in ‘How to connect to a controller’ on page 70.
Installation procedure for Unix systems ® Océ Remote Logic is set up to be platform independent. It runs on a variety ™ of operating systems providing that a Java runtime environment is available ™ for that platform. The Java runtime environment must be installed by a user with system administrator privileges, depending on Java™...
For HP-UX 10.20 and 11.00 the runtime engine can be downloaded from: http://www.unix.hp.com/java ™ The preferred version of the Java runtime environment for HP-UX 10.20 and HP-UX 11.00 is version C.01.18.xx. Linux IBM has a runtime engine available for Linux which can be downloaded from: http://www.ibm.com/java Océ TDS300 User Manual...
Installation procedure for Other systems ® ™ In general, Océ Remote Logic can run on any system with a Java Steps to install Océ Remote Logic ® in general ▼ ™ Install Java Virtual machine (preferred 1.1.8 (or higher)). Extract ‘RemoteLogic_vX.tar’ or ‘RemoteLogic_vX.zip’, from the Océ ®...
Specifies the second language in combination with the language2=lang parameter ‘country2=country’ Specifies the second language in combination with the country2=country parameter ‘language2=language ’. You must always use a matching combination of ‘lang’ and ‘country’ Note: (see table on page 65). Océ TDS300 User Manual...
Page 65
Language Language Language Country parameters Danish Czech Spanish Finnish Hungarian Italian US English UK English Dutch German French Portuguese Norwegian Swedish Polish Chinese tradition- Chinese simpli- fied Japanese The parameters can be applied to the following application: AL.exe (Application Launcher) ■...
Océ TDS300 User Manual Chapter 5 ® Océ Power Logic : The Settings Editor This chapter gives information about the Océ Settings Editor. For details about specific settings, refer to the on-line help on the Océ Settings Editor.
Introduction Use the Océ Settings Editor to set the default settings of the Océ TDS300 according to your companies requirements. Océ TDS300 User Manual...
How to start the Océ Settings Editor Start up the Océ Settings editor on a remote client after you installed the software (see ‘Install and start Océ Remote Logic® on a workstation’ on page 57). ▼ Start Océ Settings Editor on a remote workstation Select 'Océ...
A dialog box will appear containing a drop-down list box with the available systems. Select one of the available systems and click on ‘OK’. When you connect to another system, all settings have to be retrieved. This may take some time. Océ TDS300 User Manual...
An overview of the Océ Settings Editor The Océ Settings Editor allows users and operators to view settings of the system. If authorized, the settings of the system can be modified on the Océ Settings Editor. With the Océ Settings Editor two groups of settings can be configured: Key Operator settings (KO settings) ■...
[14] Océ Settings Editor General structure The Océ Settings Editor is structured as follows: Menu bar ■ Top toolbar ■ Left toolbar ■ Settings area ■ Status bar ■ Océ TDS300 User Manual...
Menu bar The menu bar of the Océ Settings Editor contains the following menus: If you select the ‘File’ menu you can log on as a particular type of user, File log off from the previously selected user mode, open an existing setting file, save the current settings to a file, connect to a different controller (only for remote users) or exit the Océ...
Page 74
Open the ‘File’ menu and select ‘Open’, or press the ‘Open’ button on the toolbar. A dialog box is displayed from where you can choose the correct file. Click the ‘Apply’ button. The loaded settings are transferred to the system. Océ TDS300 User Manual...
This is only possible if the user is logged on as a Key Operator or System Note: Administrator. Left toolbar There are four different buttons available at the left toolbar of the Océ Settings Editor. These are ‘Jobs’, ‘Printer’, ‘Scanner’ and ‘System’. Each button provides access to a specific group of settings.
Page 76
The update area contains some additional information about the selected setting. This includes a brief definition of the setting, as well as the minimum, maximum and default values (if appropriate). [18] Settings area Océ TDS300 User Manual...
Status bar The Océ Settings Editor has a status bar displaying the following information (left to right): System status (icon for connected or disconnected) ■ The following icons are used: The Océ Settings Editor is connected to a system. The Océ Settings Editor is not connected to a system. System name ■...
Use the Océ Settings Editor The Océ Settings Editor enables you to change the default settings of the system. Only authorized users are allowed to change the default settings in the Océ Settings Editor. Océ TDS300 User Manual...
User modes The following user modes are available: Anonymous user mode ■ Repro operator mode ■ Key operator mode ■ System administrator mode ■ Service operator mode. ■ The anonymous user mode only offers monitoring capabilities. You are not allowed to change anything. The repro operator, the key operator and the system administrator modes allow you to perform a number of user actions.
Log off You have to log off to leave the key operator, repro operator and system administrator modes. ▼ How to log off From the ‘File’ menu, select ‘Log off’. You return to anonymous user mode. Océ TDS300 User Manual...
To change the password You can change your password on a standard base. You can change the password for each user mode (except anonymous user mode, for which no password is required and service operator) by taking the following steps: ▼...
You now have two possibilities: a dialog box is displayed and the user can supply a directory and a file name. All settings in the current view mode are saved; not only the ones that Note: are currently visible. Océ TDS300 User Manual...
Page 83
A few special files are available here: Default.kos/Default.sas ■ These files contain the factory default settings for the Key Operator and System Administrator, respectively, and cannot be changed. Backup.kos/Backup.sas ■ These files contain a previous version of the settings for the Key Operator and System Administrator, respectively (before the last Apply).
A few settings are made directly from the tree structure area. Note: Click on the ‘Apply’ button. The new value is now applied for the setting Log from the Key Operator mode when you have finished updating the settings. Océ TDS300 User Manual...
System Administrator settings The Océ TDS300 System Administrator is responsible for: Poker settings ■ Printer language controller settings ■ Pen settings ■ Page Description Language (PDL) settings ■ Controller identification settings ■ Set memory reservation settings ■ Connectivity settings. ■...
Page 86
A few settings, such as the default pen settings, are made directly Note: from the tree structure area. Click on the ‘Apply’ button. The new value is now applied for the setting Log off from the System Administrator mode when you are finished updating settings. Océ TDS300 User Manual...
Océ TDS300 User Manual Chapter 6 Printer supplies and maintenance This chapter describes how to: Load media ■ Refill toner and replace the waste toner bag ■ Clean the glass platen and the reference roller of the scanner ■...
The Océ TDS300 is available with a roll unit for one or two rolls. Each of the rolls on the Océ TDS300 can be loaded with print material of a different size or type. The size and type of the available media are indicated on the operator panel.
Reload paper ▼ How to load roll 1 Open the drawer completely (see figure 21). [21] Open the drawer Remove the roll holder from the drawer (see figure 22). [22] Removing the roll holder from the drawer Remove the empty core from the roll holder while pressing the knob (see figure 23).
Page 90
Place the roll holder with the material in the drawer (see figure 24). [24] Reposition the roll Feed the material between the input guide plates against the rollers. Turn the rollers until the material is visible (see figure 25). Also refer to the sticker inside the drawer. Océ TDS300 User Manual...
Page 91
[25] Feed the material If you have inserted a roll with another material or with a different width, you have to program the correct width and material type (refer to ‘Media type and size on the printer’ on page 23). If you want to cut the paper to get a straight leading strip refer to ‘Cut media’...
Page 92
[28] Reposition the roll in the lower paper drawer Feed the material between the input guide plates against the rollers. Turn the rollers until the material is visible (see figure 29). Also refer to the sticker inside the drawer. Océ TDS300 User Manual...
[29] Feed the material If you want to cut the paper to get a straight leading strip refer to ‘Cut media’ on page 25. Otherwise continue with the next step. Close the lower paper compartment. Press the On-line key. How to program media settings If you insert a new roll with another material or with a different width, set the new roll specifications.
Page 94
Transparent paper 90/95 g/m (80/85 g/m Transparent 75g Transparent paper 110/115 g/m Transparent 110 g Translucent 60 g/m Translucent Vellum 20 lbs (16 lbs) Vellum Film 3.5 mil (4 mil) Film Film 4.5 mil Film 4.5 Océ TDS300 User Manual...
How to refill toner If the ‘Refill toner’ message appears on the printer panel, you must refill toner immediately. Use only B5 toner. Attention: ▼ Refill toner Turn off the printer. Unscrew the knurled nut at the left hand side of the printer and open the left cover (see figure 30).
Page 96
When the toner bottle is empty return the bottle to the original position. Unscrew the toner bottle anti clockwise. ▼ Replace the waste toner bag Pull the waste toner bag from the holder and place the cap provided on the bag (see figure 33). Océ TDS300 User Manual...
Page 97
[33] Replace the waste toner bag Slide a new waste toner bag over the holder. Close the cover and tighten the knurled nut. Press the On-line key to resume printing. Replace the toner waste bag, every time you refill the toner. Note: Printer supplies and maintenance...
Raise the cover (see figure 35 on page 99). Clean the glass platen and the white pressure platen gently with a soft cloth moistened with a small quantity “Cleaner A”. For safety information see the safety data sheet in Appendix B. Océ TDS300 User Manual...
Page 99
[35] Glass platen and reference roller Lower the top cover. Lock the cover by pushing the front side of the cover down and pushing it back to the rear until you hear a click. Make sure that the cover is closed correctly, to ensure proper original Note: transport.
Printer operator panel The graphics display The Previous key The Next/select key föregående The Stop key The Browse keys (left , right ) nästa/välj The On-line key on-line stopp...
Product specifications Océ TDS300 The Océ TDS300 is a wide format low to medium volume print and copy system. Printer Technology Electrophotography (LED) with organic photoconductor (OPC) drum and closed toner system Resolution 600 dpi Speed 3 linear meters p/min.
Page 106
Plot manipulation: rotation, auto scaling File spooling on the controller Set memory: send once, process once, print many; ca- pacity to store up to 14 A0 per GB hard disk. and create identical sets sorted by page or by set. Océ TDS300 User Manual...
Page 107
2000 , XP, and NT 4.0 driver ® ® ® ® ® ® Adobe PostScript Microsoft Windows 95/98/2000 , XP, NT 4.0 ® ® Level 3™ Apple drivers Check Océ on the internet at www.oce.com for the latest drivers. Note:...
Page 108
Up to 150 sheets (media type dependent) from A3 to A0 Types of media Plain paper, transparent paper, film, vellum, polyester and translucent Dimensions 1170 mm (W) x 1090 mm (H) x 1440 mm (D) with tray ful- ly extended Weight 35.5 kg Océ TDS300 User Manual...
It is therefore recommended to use only approved Océ materials in the Océ TDS300. A full list of Océ materials suited for use in the Océ TDS300, including plain paper, transparent paper, colored papers and various polyester films is available from your Océ representative.
Page 110
700 mm B2 (DIN) 500 mm 707 mm Avoid storing paper in rooms where temperature and humidity Attention: are high. Also, avoid dust and direct sunlight. Wrap unused paper in plastic to prevent it absorbing moisture. Océ TDS300 User Manual...
8,5 inch range on the printer. The job you print is an A1 format. The printer will automatically select the 30-inch format. The next table shows which format the Océ TDS300 controller chooses if you print a specific format on a chosen range...
Stickers with the following illustrations are used in this machine to indicate parts which should not be touched due to high voltage or extreme heat, or parts which require extra attention: Symbol Meaning Caution, high voltage Caution, high temperature Caution Océ TDS300 User Manual...
Instructions for safe use Products designed by Océ are developed and tested in Attention: conformance with the strictest international safety standards. However, to help assure the safe operation of these products, it is important that: You carry out maintenance only as far as prescribed in this manual. ■...
Page 118
Make sure that the machine is placed on a level, horizontal surface which is ■ strong enough to bear the full weight of the machine. See the Océ TDS300 safety data sheet in this appendix for information about the weight of the machine.
Safety data sheet for the Océ TDS300 This safety data sheet was compiled as a compact guide to safe Disclaimer product handling and operation, and to the best of our knowledge contains the most complete and accurate information possible. We reserve the right to revise this safety data sheet as new information becomes available.
Océ organization, or from Océ Headquarters (Océ-Technologies B.V.) in Venlo, the Netherlands. For power consumption data: see the Product Safety Data Sheet in this appendix. ® is a U.S. registered mark. NERGY Océ TDS300 User Manual...
Page 123
Océ TDS300 User Manual Appendix C Miscellaneous...
How to read this manual The consistent style that is used in this manual enables you to quickly become familiar with the use of this manual and ultimately the Océ TDS300. Each section or subsection contains a description of the feature or Description operation identified in the title.
User survey Did you find this manual to be accurate? ❏ Yes ❏ No Were you able to operate the product after reading this manual? ❏ Yes ❏ No Does this manual provide adequate background information? ❏ Yes ❏ No Is the format of this manual convenient in size, easy to read and layed out well? ❏...
Page 126
City: Country: Please return this sheet to: Océ-Technologies B.V. Attn: ITC-User Documentation P.O. Box 101 5900 MA Venlo The Netherlands Send you comments by E-mail to: itc-userdoc@oce.nl For the addresses of local Océ organizations see: www.oce.com Océ TDS300 User Manual...
Addresses of local Océ organizations Océ-Australia Ltd. Océ-Danmark A.S. P.O.Box 363 Vallensbaekvej 45 Brøndby Ferntree Gully MDC VIC 3165 DK 2605 Australia Denmark Océ-Österreich GmbH Océ-France S.A. Postfach 95 32, Avenue du Pavé Neuf, 1233 Vienna 93161 Noisy-le-grand, Cedex Austria France Océ-Belgium N.V./S.A.
Page 128
Japan Singapore 348548 Océ España SA Business Park MAS BLAU C/Osona 2, 2-3a Planta 08820 El Prat del Llobregat (Barcelona) Spain Océ-Svenska AB P.O.box 1231 S-164 28 Kista Sweden Océ-Schweiz AG Sägereistrasse 29 CH8152 Glattbrugg Switzerland Océ TDS300 User Manual...
98 Diagnostic mode 32 manual feed 9, 49 display (printer) Material Error messages 34 types 109 Status messages 33 Material properties 94 Display language 82 menu bar 73 Drivers 107 menu level indicator 20, 41 Océ TDS300 User Manual...
Page 130
29 languages 82 repro operator settings 12 Océ Remote Logic User modes 79 Safety data sheets Océ TDS300 system 8 Océ TDS400 printer 120 on/off switch printer 16 Océ TDS400 printer and scanner 121 optional safety information 117...
Page 131
synchro cut 42 system administrator settings 71 System menu 29 enter 30 time-out manual feed 25 top cover of the scanner 98 tree structure 75 turn off printer 16 turn off the printer 16, 22 turn on printer 16 turn on the printer 16, 22 undo 74 Unix 61 update area 76...