Summary of Contents for Integra Xmart ACC-XSI-CHGR-3KW60
Page 1
MPPT CHARGER 3KW VER. 2212.20 ENGLISH USER MANUAL MPPT SOLAR CHARGER MPPT SOLAR CHARGER 3KW ® ▪ Technical information on this manual is property of XMART . This manual Information cannot be copied or distributed totally or partially without written approval of XMART. ▪...
MPPT CHARGER 3KW 1. SAFETY INSTRUCTIONS SIMBOLS Warning Symbol: Shows an important WARNING "ELECTRIC SHOCK RISK" Symbol Describes electric shock risks related to this product It is required to read and understand this manual. Follow all instructions given in this manual for starting up and operating this product.
Page 3
MPPT CHARGER 3KW 2. SAFETY STANDARDS / QUALITY / PERFORMANCE SAFETY - LOW VOLTAGE DIRECTIVE (2014/35/EU) Household and similar appliances – Safety part 1: General requirements EN 60335-1:2002 +A11:2004 +A1:2004 +A12:2006 +A2:2006 +A13:2008 +A14:2010 +A15:2011 in conjunction with: Household and similar appliances – Safety part 2-29: Particular requirements for battery chargers: EN 60335-2-29: 2004 ELECTROMAGNETIC COMPATIBILITY - EMC DIRECTIVE (2014/30/EU) Generic standards-Emission standard for residential, commercial and light-industrial environments:...
MPPT CHARGER 3KW 3. PRODUCT DESCRIPTION MPPT 3KW Solar Charger by XMART is a device capable of receiving power from solar panels and using it to manage system battery charging. This is achieved by MPPT (Maximum Power Point Tracking) technology, allowing a highly efficient performance (>96%) of peak power generated by photovoltaic panels.
MPPT CHARGER 3KW 4. INSTALLATION Install this unit in controlled environments (IP31) with air free of dust, corrosive vapors, and conductive ▪ contaminants. Do not install this unit in locations where temperature and humidity limits described by this manual are ▪...
MPPT CHARGER 3KW MPPT 3KW CHARGER / CONNECTION TERMINALS: SOLAR PANELS & BATTERIES Recharge voltage: 12VDC, 24VDC, or 48VDC (Autodetection) OPTIONAL SENSORS RTS: This charger can (optionally) use a Remote Temperature Sensor (RTS) located near batteries. This is used to compensate recharge voltage by temperature. BVS: Battery Voltage can be measured more precisely by Battery Voltage Sensor (BVS) Input.
MPPT CHARGER 3KW MPPT CHARGER 3KW / 48VDC COMMUNICATIONS This charger has a built-in communication RS232 port. Additionally, it also includes a Smart Slot where COMM cards can be installed, such as: SNMP, USB Port, or MODBUS. RECOMMENDED WIRING GAUGE (*) BATTERIES VDC AMPS.
MPPT CHARGER 3KW 5. OPERATION For correct operation, this unit needs wires from Solar Panels and Batteries to be properly connected to correct terminals. Any misconnection will avoid proper operation and even cause permanent damage to charger. Charger Will not operate until batteries are detected. OPERATION PANEL It consists of an LCD screen, 3 LED, and an ON/MENU button.
MPPT CHARGER 3KW PUSH-BUTTON ON / MENU: 1s Push: Turns on the charger ▪ 3s Push, while charger is working: Opens Configuration Menu. ▪ While in Configuration Menu: 1 short push goes to next function, sequentially, one by one. ▪ While on required function, push button for 1.5s to select it.
Page 11
MPPT CHARGER 3KW SETTING To open Configuration Menu, press push-button for 3 seconds while charger is working. Once inside, press push-button shortly (less than 0.5 seconds) to go from one function to the next. After reaching desired function, press push-button for 1.5 seconds to enter modification mode, then select desired value by shortly pushing the push-button.
MPPT CHARGER 3KW If equalizing function is enabled (function 08) equalization can be either started or stopped immediately selecting one of these options: Equalizing immediate start ADS: Stops equalization AEN: Starts equalization Code E9 will be displayed during equalization is in process. RECHARGE VOLTAGES ACCORDING TO BATTERIES TYPE (VDC) 12V BATTERY BANKS 24V BATTERY BANKS...
Page 13
MPPT CHARGER 3KW 7. RECHARGE TECHNOLOGY To improve batteries lifespan, this charger counts on a smart 3 steps algorithm: 1- Constant Current (Bulk) During first charging stage, charger injects a constant current while batteries increase their voltage. During this stage batteries recover up to 90% of their total capacity. This stage takes 60% of total recharging time. Once setting voltage is reached, charger goes to following stage.
Page 14
MPPT CHARGER 3KW 8. SOPORTE Y GARANTIA Support: If a failure or problem is detected please check troubleshooting section in user manual. If problem cannot be solved, please contact authorized service center or authorized dealer. Batteries: Rechargeable batteries can be charged and discharged hundreds of times. However, they will eventually wear out. This is not a defect or failure so that batteries wear out is not covered by this warranty.
Need help?
Do you have a question about the Xmart ACC-XSI-CHGR-3KW60 and is the answer not in the manual?
Questions and answers