Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Summary of Contents for DRAPER TOOLS TPS220D
- Page 1 Version 3 September 2022 230V TRI-BASE SANDER 57681...
-
Page 2: Preface
All photographs and drawings within this manual are document is part of the product; retain it for the life supplied by Draper Tools to help illustrate correct of the product, passing it on to subsequent holders. operation of the product. -
Page 3: Table Of Contents
2. Contents Preface 1.1 Product Reference 1.2 Revisions 1.3 Understanding the Safety Content of This Manual 1.4 Copyright © Notice Contents Warranty Product Introduction 4.1 Scope 4.2 Specification Health and Safety Information 5.1 General Power Tool Safety Warnings 5.2 Additional Safety Information for This Sander 5.3 Connection to the Power Supply 5.4 Residual Risk... -
Page 4: Warranty
This warranty period covers parts and labour for 24 months from the date of Your Draper Tools guarantee is not effective until you can purchase. Where tools have been hired out, the warranty produce, upon request, a dated receipt or invoice to period covers 90 days from the date of purchase. -
Page 5: Product Introduction
Any other application beyond the conditions established for use will be considered misuse. Draper Tools accepts no responsibility for improper use of this product. 4.2 Specification Stock No. -
Page 6: Health And Safety Information
5. Health and Safety Information Important: Read all the Health and Safety instructions − Use of a cord suitable for outdoor use reduces the before attempting to operate, maintain or repair this risk of electric shock. product. Non-compliance with these instructions may • If operating a power tool in a damp location is result in injury or damage to the user or the product. -
Page 7: Additional Safety Information For This Sander
5. Health and Safety Information 5.2 Additional Safety Information for Power tool use and care This Sander • Do not force the power tool. Use the correct power tool for your application. Important: ALWAYS read and adhere to the workpiece − The correct power tool will do the job better and ... -
Page 8: Connection To The Power Supply
If the power supply cord is damaged, it must be replaced by Draper Tools, an authorised service agent or similarly qualified personnel in order to avoid a hazard. The damaged or incomplete plug, when cut from the cable, shall be disabled to prevent connection to a live electrical outlet. -
Page 9: Identification And Unpacking
6. Identification and Unpacking 6.1 Product Overview Base plate mount On button Dust box Power cable and plug Dust collector assembly Filter Hand grips LED lamp Off button – 9 –... -
Page 10: What's In The Box
6. Identification and Unpacking 6.2 What’s in the Box? Carefully remove the product from the packaging and Before assembling the product, lay the contents out and examine it for any signs of damage that may have check them against the parts shown below. If any part is occurred during shipment. -
Page 11: Operating Instructions
7. Operating Instructions Important: Read and understand all the safety 4. Grip the sander using one or both hands against the instructions listed in this manual before attempting to hand grips (5) on the top and front of the tool. use this product. -
Page 12: Installing And Replacing The Base Plate And Sheets
7. Operating Instructions 7.3 Installing and Replacing the Base 3. Insert the required base plate, ensuring that the lugs (11) are fully inserted into the recesses (12) in the Plate and Sheets base plate mount and the screw hole is correctly WARNING! ALWAYS install the desired sanding aligned. -
Page 13: Choosing The Appropriate Sanding Grade
7. Operating Instructions The front section of the palm sanding sheets can be Firmly grip both the dust box and the black housing and removed and used with the detail base plate. manoeuvre the dust collector assembly downwards. Reasonable force is required to separate the dust Important: DO NOT use detail sanding sheets on the collector assembly from the tool body. -
Page 14: Maintenance And Troubleshooting
8. Maintenance and Troubleshooting Important: ALWAYS ensure that the tool is switched off, 2. Empty the dust collector assembly: disconnected from the power supply, has come to a a. Hold the dust box (2) with the circular opening complete stop and has completely cooled before facing upwards and allow the dust to fall to the attempting to adjust or maintain this product. -
Page 15: Storing The Product
6. Push the dust box back into its housing until it clicks into place. • Draper Tools recommends installing the palm base plate before storing this product to prevent bending, 7. Reinstall the dust collector assembly onto the tool;... -
Page 16: Spares, Returns And Disposal
Draper Tools will invalidate your warranty. Important: For safety, ALWAYS empty and clean the product of dust before returning it to Draper Tools or its authorised agent. At the end of its working life, dispose of the product responsibly and in line with local regulations. -
Page 17: Explanation Of Symbols
10. Explanation of Symbols Product weight (net) Read the instruction manual Warning/Caution! Continuous A-weighted sound power level Class II construction Wear face mask and safety glasses (Double insulated) WEEE – Wear ear defenders Waste Electrical & Electronic Equipment Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish Wear protective gloves European conformity... -
Page 18: Notes
Notes – 18 –... - Page 19 Notes – 19 –...
- Page 20 Telephone Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 General Fax: +44 (0) 23 8026 0784 Please contact the Draper Tools Product Helpline for repair and servicing enquiries. © Published by Draper Tools Limited © Published by Draper Tools Limited...
Need help?
Do you have a question about the TPS220D and is the answer not in the manual?
Questions and answers