Redback ZH User Manual page 2

Please read these instruction and check the contents of this kit carefully before
installation.
Contents included
SF (Swing Frame)
Ÿ 1 x wall mount cabinet
Ÿ 1 x swing frame
1 x key lock
Ÿ
5 x rubber cushions
Ÿ
1 x earth cable
Ÿ
2/3/4 (6RU / 9 & 12RU / 18RU) hinges and hex nuts sets
Ÿ
1 x hex nut driver
Ÿ
2 x alignment studs
Ÿ
Instructions
1. Remove mounting plate, back panel and discard.
2. 2/3/4 (6RU / 9 & 12RU / 18RU) hinges and hex nuts sets to Redback rack.
3. Fix key lock to rack and attach lock arm in unlocked position.
4. Install rubber cushions for soft closing.
5. Mount swing frame correct side up to the redback rack via hinges.
6. Install earth cable between Redback rack and swing frame.
7. install alignment studs provided and ensure cabinet and cabinet swing frame
is locked when not in use and remove key.
Structure
WM
1 x Redback rack
Ÿ
Ÿ 1 x rear panel
1 x mounting plate
Ÿ
Ÿ 20 x cage nuts
WM
Mounting plate
Fan tray
ZH
Swing frame
Fan tray
Hinge
Hex nut driver
Rear panel
Alignment stud