Page 1
INPUT SELECTOR Prog. 1 Prog. 2 Prog. 3 Prog. 4 Prog. 5 LINE DOUBLER VU-LD20U INPUT 6 POWER REMOTE Prog. 6 Prog. 7 Prog. 8 Prog. 9 Prog. 10 SENSOR S-Video Comp FAROUDJA PICTURE PLUS For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet.
Page 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
FEATURES Stunning image quality through highly accurate signal processing Our original three-dimension Y/C separation circuit has been employed together with the image processing circuit made by Faroudja in the decoder section, the line doubler section, and the bandwidth expander section. Consistent signal processing with high accuracy from input to output provides stunning image quality.
IMPORTANT SAFEGUARDS Please read all these instructions carefully regarding your Line double before you begin operating it. Follow all warnings and instructions marked on the Line doubler. Thank you. never be blocked by placing the product on a bed, sofa, Read Instructions rug, or other similar surface.
Page 5
(including amplifiers) that produce heat. Declaration of Conformity Model Number : VU-LD20U Trade Name : JVC Responsible Party : JVC Americas Corp. Address : 1700 Valley Road Wayne. N.J. 07470 Telephone Number : 973-315-5000 This device complies with Part 15 of FCC Rules.
Rear panel VIDEO IN S-VIDEO IN COMPONENT IN VIDEO IN S-VIDEO IN COMPONENT IN OUTPUT 1 MAIN SW RS-232C OUTPUT 2 REC-OUT 1 OUTPUT 1 terminals (BNC) 6 REC-OUT terminal Use to connect with a video device having RGB termi- Use to output supplied signals directly.
OVERVIEW OF THE REMOTE CONTROL PROGRAM POWER BRIGHT COLOR CONT TINT SHARP ENTER VC MENU LIST { , } } , $ $ and % % buttons 1 Illumination button Press these buttons to select items or change set- One press on this button illuminates the titles of the buttons about 10 seconds.
9 VC MENU button Use to display the VIDEO EQUALIZING MENU for image quality adjustment. Press this button again to cancel the VIDEO EQUALIZING MENU. See page 21 for details. 0 LIST button Use to confirm and set the contents of the programs. See page 15 for details.
This product can be connected with 2 projectors and 18 video sources at the maximum. Projector etc. VU-LD20U INPUT SELECTOR Prog. 1 Prog. 2 Prog. 3 Prog. 4 Prog. 5 LINE DOUBLER VU-LD20U INPUT 6 POWER REMOTE Prog. 6 Prog. 7 Prog. 8 Prog. 9 Prog. 10...
CONNECTIONS (continued) Connection with a Projector Example of the advanced image qual- ity adjustment screen VIDEO™EQUALIZING™MENU™2 ™™COLOR-COMP™™™™:1 ™™GAMMA-COR™™™™™:OFF ™™DC-TRN-COR™™™™:OFF ™™PRE/OVER™™™™™™:4 ™™Y-EDGE™™™™™™™™:OFF ™™C-EDGE™™™™™™™™:OFF ™™™™MENU™3 VIDEO™EQUALIZING™MENU™3 ™™PICTURE-EX™™™™:OFF ™™COLOR-EX™™™™™™:OFFŁ Ł ™™™™MENU™1 5BNC cable OUTPUT 1 VIDEO IN S-VIDEO IN COMPONENT IN VIDEO IN S-VIDEO IN COMPONENT IN MAIN SW...
Connection with a VCR Example of the program setting OUTPUT 1 VIDEO IN S-VIDEO IN COMPONENT IN VIDEO IN S-VIDEO IN COMPONENT IN MAIN SW screen RS-232C OUTPUT 2 PROGRAM™1: REC-OUT ™INPUT™TERMINAL™:S-Y/C-3 ™VIDEO™FORMAT™™™: ™COLOR™MATRIX™™™: ™LINE™DOUBLER™™™:ON ™VIDEO™BAND™™™™™:WIDE ™PROG-TITLE™™:VTR Video cable S-video cable See page 15 to 18 for setting and the setting items.
CONNECTIONS (continued) Connection with an AV amplifier VIDEO IN S-VIDEO IN COMPONENT IN VIDEO IN S-VIDEO IN COMPONENT IN OUTPUT 1 MAIN SW RS-232C OUTPUT 2 REC-OUT Video cable to MONITOR OUT AV amplifier Important! • Turn off the power before connection. •...
PROGRAM button BRIGHT COLOR CONT TINT SHARP ENTER INPUT SELECTOR Prog. 1 Prog. 2 Prog. 3 Prog. 4 Prog. 5 LINE DOUBLER VU-LD20U ∞ ¡¡ INPUT 6 POWER REMOTE Prog. 6 Prog. 7 Prog. 8 Prog. 9 Prog. 10 SENSOR S-Video...
Page 16
INPUT SETTING (continued) Press the { { or } } button on the remote control to select a program number to be set. The selected program is displayed in yellow. Press the ENTER button. PROGRAM™1:Ł ™INPUT™TERMINAL™:S-Y/C-1 The program setting screen of the selected program number is ™VIDEO™FORMAT™™™: ™COLOR™MATRIX™™™: displayed.
Program setting items PROGRAM™1: ™INPUT™TERMINAL™:S-Y/C-1 1 INPUT TERMINAL setting ™VIDEO™FORMAT™™™: Use this item to select the INPUT TERMINAL. ™COLOR™MATRIX™™™: ™LINE™DOUBLER™™™:ON ™VIDEO™BAND™™™™™:WIDE ™PROG-TITLE™™:LD Type of input terminal Display Video terminal VIDEO-1to 6 S-Video terminal S-Y/C-1 to 6 Component(Y/U/V)terminal Y/U/V-1 to 6 The settings of VIDEO FORMAT, COLOR MATRIX and LINE DOUBLER may be fixed and not be changed due to the INPUT TERMI- NAL setting.
INPUT SETTING (continued) Program title setting Carry out steps 1 to 6 on page 16. PROGRAM™1: ™INPUT™TERMINAL™:S-Y/C-1 The program setting screen of the selected program number is ™VIDEO™FORMAT™™™: ™COLOR™MATRIX™™™: displayed. ™LINE™DOUBLER™™™:ON ™VIDEO™BAND™™™™™:WIDE ™PROG-TITLE™™:LD { or } } button on the remote Press the { PROGRAM™1: control to select PROG-TITLE.
BASIC USE ( To see the images from the connected devices) Turn on the power of the connected devices. Turn on the MAIN SW on the rear panel. The main power indicator illuminates in red. Press the POWER button. The power indicator illuminates in green. Select a program.
IMAGE QUALITY ADJUSTMENT Basic image quality adjustment Select a program to adjust the image quality Press the PROGRAM (1 to 10) button, the PROGRAM ª or º button on the remote control. Press the PICTURE button on the remote control (SHARPNESS, CONT, BRIGHT, COLOR, or TINT) to adjust the desired item.
Advanced image quality adjustment Select a program to adjust the image quality Press the PROGRAM (1 to 10) button, the PROGRAM ª or º button on the remote control. Press the VC MENU button on the remote CONTROL™MENU control. ™1:VIDEO™EQUALIZING ™2:SOURCE SETTING ™3:PARAMETER™ENTRY The CONTROL MENU is displayed.
IMAGE QUALITY ADJUSTMENT (continued) Adjustment items VIDEO™EQUALIZING™MENU™1 VIDEO EQUALIZING MENU 1 ™™COLOR-TEMP™™™™:HIGH ™™Y-NR™™™™™™™™™™:OFF 1. COLOR-TEMP setting ™™C-NR™™™™™™™™™™:OFF Use this item to set the color temperature. Each press on the % button changes the ™™YCS™PARAMETER™: ™™Y/C-DELAY™™™™™:0 selection as HIGH (luminance of TV monitor/ Japanese standard) USER REF ™™...
Page 23
VIDEO EQUALIZING MENU 2 1. COLOR-COMP adjustment VIDEO™EQUALIZING™MENU™2 ™™COLOR-COMP™™™™:1 Use this item to adjust the color detection axis. Depending on the selected modes, the ™™GAMMA-COR™™™™™:OFF color balance (especially skin color) is changed. Each press on the % button changes ™™DC-TRN-COR™™™™:OFF the setting as 1 2 3.
Control this line doubler by using a personal computer You can control this product using a personal computer (PC) having an RS-232C terminal by connecting them together. Functions controlled by a PC • Power on/off • Image quality adjustment (CONTRAST, COLOR, TINT, SHARPNESS) •...
Page 25
Use the attached application software designed only for control to control the product using a PC. To install the application software 1 Insert the attached floppy disk into the floppy disc drive. 2. Double-click My Computer on your desk top and then double-click 3 1/2 Floppy in the My Computer window. 3.
The product does not operate correctly when connected with an external device. • This product is not applicable to any other projectors than JVC LCD projector. (If connecting with other manufacturer's product, set the sync. signal of the connected external device to H/V separate manually.
General Rated power supply AC120 V, 60 Hz Rated input 41 W +5 °C to +35 ° C Operating conditions Temperature: humidity: 30% to 80% -20 °C to +35 °C Installation conditions Temperature: humidity: 30% to 90% Outside dimensions 42.6 cm X 10.0 cm X 33.9 cm Weight Approx.
Page 30
Printed in Japan M-871D282A3Ø 1299NFV MEE MEE VICTOR COMPANY OF JAPAN, LIMITED...
Page 31
This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...