TABLE OF CONTENTS Introduction Applications and functions About the watch Installing the app Device configuration Packaging content Smartwatch functions Time, date Hardware requirements Pedometer Charging the watch Calorie counter Additional information Distance How to wear Pulse a smartwatch? Blood pressure Belt change Saturation Resistance measurement...
Page 3
TABLE OF CONTENTS Applications and functions General Information App functions Specifications Measurement history Product complaint Health measurements Product return Fatigue measurement Product exchange Body temperature Find a device Remote control of your device Notification settings Alarm clock Do not disturb" mode G-Sensor function Auto metering Reset...
Introduction About Watchmark WT1 The armband is designed to measure body and ambient temperature. It provides a reliable measurement in a very short time. The watch also measures pulse, blood pressure and oxygenation and takes ECG measurements. The smartwatch will notify you of incoming calls and messages.
Hardware requirements iOS 8.2 and above Android 4.4 and later Bluetooth supported: 4.0 Android 4.4+ IOS 8.2+ Charging instructions This smartwatch uses USB charging. Detach the smartwatch strap from the device and then plug the USB end into the USB port.
Additional information Please read the entire user manual carefully before using the equipment. It is recommended to use only the original battery, charger and accessories that are included in the kit received with the device. Neither the manufacturer nor the distributor is responsible for the use of third-party accessories.
How to wear a smartwatch? The strap for this watch model is 17 mm wide. It is interchangeable and additional straps can be purchased in a different colour or material. Wearing the watch When you're not exercising, wear the smartwatch as you would a regular watch, i.e.
Belt change Attach the original strap to the watch before using it. Be careful when doing this. Wearing the watch strap Insert the end of the strap into the plastic parts of the watch envelope and tighten. Removing the watch strap Grasp the smartwatch envelope and strap.
Applications and functions Installing applications The app for the WT1 smartwatch model is "WearFit 2.0". The app must be downloaded from the Google Play / App Store or via the QR code below. Google Play App Store Once the app is installed, turn on Bluetooth on your phone and go to the app.
Features available on the Smartwatch Time, date, day of the week The display shows the time, date and day of the week. The data is displayed on the main screen of the watch. Pedometer Counts the steps taken on a given day (data resets each day from 00:00).
Features available on the Smartwatch Pulse* Heart rate, or pulse: this is the number of beats of the heart muscle per 1 minute. The accepted norm is between 60 and 100 beats per minute. When the pulse is elevated we speak of tachycardia, while when it is reduced we speak of bradycardia.
Features available on the Smartwatch Measurement of immunity (immunological value)* Measured by assessing the defence mechanisms of the immune system. The higher the value, the greater the body's immunity. In the watch, the function for measuring immunity is located in the seventh tab under the name immune reference.
Features available on the Smartwatch Sleep monitor* A function that helps to analyse a person's sleep. The watch shows the number of hours slept and the phases of sleep, in which we distinguish between shallow and deep sleep. On the watch, the sleep information is located in the tenth tab. Notifications/messages Once the watch has been connected to the phone via the app and the relevant consents have been allowed, incoming...
Features available on the Smartwatch Stopwatch A function that is used to check and measure short distances of time. On the watch, the stopwatch function is located in the thirteenth tab. To activate the function, long press the touch panel and select "Stopwatch". Find your phone A function to find your phone.
Features available on the Smartwatch Music control When you connect your watch to your phone via the app and turn on music on your phone, you can pause and resume music, as well as rewind and rewind songs. To control the music, turn it on on your phone and then go to the music function.
Functions available in a dedicated application Measurement history In the app, you will find the history of measurements taken by the watch. To check the history, select "Main" in the app and then click on the parameter you are interested in. You can analyse how the results change over the course of a day, week and month.
Functions available in a dedicated application ECG* To measure using the app, go to the app and select "Main", "Fatigue" and then "Click to start measuring". The result will appear in the app. To download or share the measurement result, select the icon in the top right corner. Body temperature The device continuously measures temperature.
Functions available in a dedicated application Call and message notifications From the smartwatch, you can enable call and message notifications. The watch will vibrate when a call or message arrives on your phone. To enable these features, go to 'Me', then 'Device management' and select 'Notifications'.
Functions available in a dedicated application G-Sensor function To enable the function of activating the watch screen with a movement of the hand, select "Me" in the app, then "Device management" and "Touch screen". Automatic monitoring of health functions every hour To perform automatic measurements without our intervention, automatic is performed without our intervention, enable the automatic measurements function.
General Information Specifications IP67** water resistance 90mAh battery Allows you to use the watch State-of-the-art lithium while washing your hands or polymer battery. on a rainy day. MTK2502 processor Sporty design High performance and Durable materials and precision measurements. silicone strap for easy cleaning.
2 years from the purchase of the equipment. The advertised product should be sent to the address: Watchmark CH Marino, 7 Paprotna Street, 51-117 Wrocław. To register a complaint, please fill in the form at https://ecom.freshdesk.com/support/tickets/new.
General Information Product return The customer has the right to withdraw from the contract within 14 days of receiving the product, without giving any reason. Returned goods must be of full value and must not bear any signs of use. If the returned goods are not in perfect condition, the Customer shall bear the financial consequences related to the reduction of the value of the goods if they have been used in an inappropriate manner...
General Information Product return The seller shall refund the payment using the same method of payment used by the consumer, unless the consumer has expressly agreed to a different method of refund that does not incur any costs for the consumer. Goods purchased stationary in the shop are not refundable.
Page 24
General Information The customer sends the purchased goods on their own to the address: Watchmark CH Manhattan, Al. Jana Pawła II 16, 64-100 Leszno. The parcel must be accompanied by the purchased goods free of defects and the application number received after completing the form.
Need help?
Do you have a question about the WT1 and is the answer not in the manual?
Questions and answers