Page 2
Thank you for choosing iConnect wireless intruder control panel. This quick start guide describes the main user operating actions of the iConnect . To view the full version of the user manual, please refer to our website www.riscogroup.com. Full Arm Press If required, enter your Partial Arm...
Page 3
Edit/Delete User Code 4. Select a user and press 5. Select [1] Edit Code. 1. From the main display press 6. Edit the user code or enter 0000 2. Enter master code (Default code 1234) to delete 3. Select [4] User Code and press 7.
Page 4
Keyfob : Full Arm : Part Arm, PGM : Disarm : Perimeter Arm, PGM : Panic alarm (press and hold down) Register to RISCO Cloud Go to www.riscocloud.com/register Fill in your first name and last name. Enter your email address as Login Name (required for 1st time activation and can be altered later) Define password (minimum of 6 characters and at least one digit) and confirm.
Need help?
Do you have a question about the iconnect 2 and is the answer not in the manual?
Questions and answers