TRIPLE 1 LOOP-THROUGH INPUT TO 2 OUTPUTS ANALOG VIDEO DISTRIBUTOR WITH HIGH BANDWIDTH AND WIDE DYNAMIC RANGE Version 1.0 1. DESCRIPTION ........................5 1.1. The AVD3013C01 ........................... 5 1.2. Features ............................. 6 1.3. Block diagram ..........................7 2. SPECIFICATIONS ......................... 9 3.
0 dB. The AVD3013C01 is a TL3000 terminal line module and can be housed in a three rack unit (3 RU) UR3000 mounting frame or a 1 RU UR3100 mounting frame.
• Wide dynamic range. • Wide bandwidth. • One UR3000 mounting frame can house up to 12 AVD3013C01 modules. If power supply redundancy is required and FA3000 or FA3001 modules are used then only 10 modules can be housed in the mounting frame. If PSU3300 or PSU3301 modules are used for this purpose then up to 12 modules can be installed.
Albalá Ingenieros | Manual AVD3013C01 2. SPECIFICATIONS Analog video signal input Connector Return loss >40 dB up to 30 MHz Return loss >15 dB up to 300 MHz Type Passive Loop-Through Number of inputs 1 per section, 3 sections Allowed voltage range ±5 V...
ELECTROSTATIC DISCHARGE. Always use antistatic bags clearly identified with a high degree of shielding for storage and transportation. The AVD3013C01 module is composed of two parts: one AVD3013P01 main board and one XVD3000P03 rear board. Both parts must be installed in a UR3000 or UR3100 mounting frame following the instructions in the corresponding section of this chapter.
4 - Attach the rear board to the mounting frame with two M3 metric screws and tighten. 5 - Insert the AVD3013P01 board (main board of the AVD3013C01 module) into the front of the mounting frame. The edges of the card slide into two plastic guides inside the mounting frame.
Page 13
Albalá Ingenieros | Manual AVD3013C01 Details for installation of the module in 3 RU mounting frames Details for installation of the module in 1 RU mounting frames...
Albalá Ingenieros | Manual AVD3013C01 3.6. Interconnection The following figure shows the AVD3013C01 module rear board connector layout. Rear view of the AVD3013C01 The AVD3013C01 provides three analog video loop-through inputs (IN-A, LOOP-A, IN-B, LOOP-B, IN-C, LOOP-C) and two outputs per section (OUT1-A, OUT2-A, OUT1-B, OUT2-B, OUT1-C, OUT2-C).
Page 15
For analog video connections a coaxial cable with 75 Ω of characteristic impedance must be used. When the signal distributed by the AVD3013C01 is high frequency or has a wide bandwidth (>30 MHz) it is recommended that the unused outputs be terminated with...
Albalá Ingenieros | Manual AVD3013C01 4. OPERATION This section describes the significance of the front panel indicators of the AVD3013C01 module and their remote control and monitoring ability. 4.1. Front panel description The appearance of the front panel and the elements it contains are shown in the following illustration.
Albalá Ingenieros | Manual AVD3013C01 5. GLOSSARY SD-SDI Standard Definition - Serial Digital Interface. A serial digital interface capable of transmitting standard definition television signals with bitrates of 143 Mbit/s, 177 Mbit/s, 270 Mbit/s or 360 Mbit/s.
Need help?
Do you have a question about the AVD3013C01 and is the answer not in the manual?
Questions and answers