Whittier Wood Furniture Westport Storage Shelf 558Wa Assembly Instructions Manual

Advertisement

Quick Links

Model #
558Wa
Westport Storage Shelf
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions and Finishing Hints before
you begin your project.
CALL US FIRST!
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
Please contact Whittier Wood Products customer
service department directly by phone, fax, mail or
email for a replacement part.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.
800-653-3336
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
• Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
For normal household use only. Not recommended
for commercial use.
Do not climb or stand on this piece of furniture.
Unload items before you move this unit.
Do not overload this unit.
Before you load or move this unit, check all screws
and supports for tightness.
Before you begin your project, completely read the
Assembly Instructions and Finishing Hints.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on
a cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
Do not return this item to the store.
To Order: Provide the furniture model number (upper
left corner of this page), the part letter, production
code, quantity needed, reason for replacement, your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
Production Code:
VN
.
03/10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Westport Storage Shelf 558Wa and is the answer not in the manual?

Questions and answers

Summary of Contents for Whittier Wood Furniture Westport Storage Shelf 558Wa

  • Page 1 Model # 558Wa Westport Storage Shelf Assembly Instructions IMPORTANT NOTES: For normal household use only. Not recommended for commercial use. Do not climb or stand on this piece of furniture. Unload items before you move this unit. Do not overload this unit. Before you load or move this unit, check all screws and supports for tightness.
  • Page 2 558Wa Westport Storage Shelf — Parts List Please identify the parts and check that quantities received match what is on this list. If you need to replace a part, refer to the following letter and item name. Aa — Top Assembly — Qty. 1 B —...
  • Page 3: Tools Required

    558Wa Westport Storage Shelf Assembly Instructions Tools Required: Phillips Head Screwdriver, Rubber Mallet or Padded Hammer, Wood Glue, Tape Measure Important Notes: We recommend that you apply the finish before you assemble this unit. Before doing so, completely read the enclosed Finishing Hints. View from the Front Fig.
  • Page 4 Fig. 3 Fig. 3a 3. Spread a thin layer of glue in the dowel hole on the Left Side. Insert the Back Assembly (Ga) as shown in Figures 3 and 3a. Quickly wipe away any excess glue. Using the pocket holes as guides, attach using two #8x1-3/16"...
  • Page 5 Fig. 5 5. Fit the Top Assembly (Aa) over the dowels on the Frame Assembly. You do not need to glue these dowels. In the front eight pilot holes, attach with eight #8x1-3/4" Pan Head Screws (V). In the four rear predrilled holes, attach with four #8x1-3/16"...
  • Page 6 Fig. 7 x 10 7. Using the predrilled holes as guides, secure the Back Assembly (Ga) to the Frame Assembly with #8x20mm Pan Head Screws (U). See Figure 7.  Wall  Fig. 8 8. Determine where you want the bottom of your storage shelf to end and draw a faint pencil line on the wall.
  • Page 7 Wall Fig. 9 9. Locate studs in the wall behind the space where you want to hang your storage shelf. Affix the Wall Brackets (K) into the studs with #8x1-3/4" Pan Head Screws (V). IF YOU CANNOT LOCATE ENOUGH STUDS TO SECURE THE BRACKETS, purchase the proper wall attachment hardware for your type of wall and secure the brackets according to those instructions.
  • Page 8 Wall Fig. 11 11. Locate a stud in the wall and make a faint mark on the top of the shelf assembly. This will be where you attach the Angle Bracket (R). Take the shelf down from the wall and attach the Angle Bracket (R) to the storage shelf with two #8x1-3/16"...
  • Page 9: Notas Importantes

    Modelo # 558Wa Estante para Almacenaje Westport Instrucciones para Armar NOTAS IMPORTANTES: Sólo para uso doméstico. NO se recomienda para uso comercial. No se suba, no se siente ni se pare sobre este mueble. No sobre cargue este mueble. Antes de mover este mueble, saque su contenido. Antes de cargar o mover este mueble, compreuebe que todos los tonillos y soportes estén apretados.
  • Page 10: Aviso Importante

    558Wa Estante para Almacenaje Westport Lista de piezas Antes de comenzar a armar la unidad, identifique las piezas y verifique que las cantidades recibidas coinciden con las de esta lista. Si tiene que reemplazar una pieza, indique la letra y el nombre que vienen a continuación.
  • Page 11 APLIQUE COLA A TODOS LOS TAQUETES EN 8. Pared = Wall ESTE PASO Determine donde quiere que termine la parte inferior del estante y marque una línea débil con lápiz en la pared. Aplique una capa delgada de cola en el orificio para taquete Utilizando una cinta de medir, mida 15 pulgadas desde esa del lateral izquierdo.
  • Page 12 No. de Modèle 558Wa Étagères de Rangement Westport Instructions de Montage REMARQUES IMPORTANTE: Pour usage ménanger normal seulement. N’est pas recommandé pour usage commercial. Ne grimpez pas, ne vous asseyez pas ou ne vous tenez pas debout sur ce meuble. Ne surchargez ce meuble.
  • Page 13: Instructions De Montage

    558Wa Étagères de Rangement Westport Nomenclature des pièces Avant de commencer le montage, identifiez les pièces et assurez-vous que les quantités reçues correspondent à celles de cette liste. Si vous devez remplacer une pièce, veuillez vous référer à la liste suivante pour le nom et la lettre de la pièce. Pièce Description Qté...
  • Page 14 COLLEZ TOUTES LES CHEVILLES LORS DE Mur = Wall CETTE ÉTAPE Déterminez le point où vous voulez que se termine le bas de Étalez une fine couche de colle dans le trou de cheville votre étagère de rangement et tracez un léger trait de crayon ménagé...
  • Page 15 1. Choose a finish that will meet your expectations for the product you are finishing. Are you matching existing furniture or do you want a “natural” finish? Is the piece to be functional, decorative or both? The answers Rubber gloves to these questions may affect the type of finish you choose.
  • Page 16 Gluing Hints (cont.) 3. We recommend that you use a good wood glue, such as Elmer’s Wood Glue or White Glue, Tite- bond Wood Glue or the equivalent; unless the instructions call for a special type such as a slow drying epoxy glue.

Table of Contents