1. Manuals
  2. Brands
  3. Manaras Manuals
  4. Transmitter
  5. RADIOEM903
  6. Programming instructions

Manaras RADIOEM903 Programming Instructions

Dip switch transmitter
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

Transmitters: Compatibility and Replacement

Replacement Product
RADIOEM903
Programming Instructions
➢ RADIOEM903 Transmitter Initial Configuration: Use it to Control 1, 2 or 3 Doors.
1. Press and HOLD Buttons
The RED LED will
configuration or you will need to restart.
j
2. Release Buttons
and
j
k
3. Press Button
or
to the appropriate number of doors to be controlled by this
j
transmitter, ie:
for 1-Door,
4. The RED LED will stop
5. The remaining buttons will be deactivated.

➢ Replacing RADIO022 (3-Door Transmitter) with new RADIOEM903 (3-Door Transmitter):

The DIP SWITCH transmitter has 10 switching keys. With the use of a screwdriver or a pen, place the dip switch keys
on RADIOEM903 at the same positions as those found on RADIO022.
Coding the Receiver (as reference):
➔ Dip Switch Keys #1 to #7 = must be at the same ON / OFF positions as the transmitter.
➔ Dip Switch Keys #8, #9, #10 = coding of the receiver number
j
j
g Button
Door
= Receiver
Keys #8 and #10 must be set to ON. Key #9 must be set to OFF.
1
2
3
ON
Must match with transmitter
↑
1-800-361-2260
www.manaras.com
RADIOEM903
RADIOEM903
Replacement and Programming Instructions
Replacement and Programming Instructions
• 3-Button Transmitter.
• Operates up to 3 doors.
• Open / Close function.
• LED indicator.
• 3V battery.
• Sun-visor clip.
j
l
and
simultaneously for 5 sec.
BLINK. You have 15 sec. to complete the
l
.
l
or
in order to configure the transmitter
k
l
for 2-Doors,
for 3-Doors.
blinking. Programming is now complete.
j
4
5
6
7
- Dip Switch Transmitter
- Dip Switch Transmitter
Discontinued Products
RADIO022
(MT3-1000)
RADIO016
(MT2-1000)
RADIO027
(MT-1000)
jkl
(refer below for the receiver number).
8
9
10
■
■
■
1
• 3-Button Transmitter.
• Operates 3 doors.
• Open / Close function.
• 9V battery.
• Sun-visor clip.
• 2-Button Transmitter.
• Operates 2 doors.
• Open / Close function.
• 9V battery.
• Sun-visor clip.
• 1-Button Transmitter.
• Operates 1 door.
• Open / Close function.
• 9V battery.
• Sun-visor clip.
j
k
l
j
TN1040 REV 1 - 2017/07/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RADIOEM903 and is the answer not in the manual?

Questions and answers

Summary of Contents for Manaras RADIOEM903

  • Page 1 (MT-1000) • 9V battery. • Sun-visor clip. Programming Instructions ➢ RADIOEM903 Transmitter Initial Configuration: Use it to Control 1, 2 or 3 Doors. 1. Press and HOLD Buttons simultaneously for 5 sec. The RED LED will BLINK. You have 15 sec. to complete the configuration or you will need to restart.
  • Page 2 The DIP SWITCH transmitter has 10 switching keys. With the use of a screwdriver or a pen, place the dip switch keys on RADIOEM903 at the same positions as those found on RADIO016. Use buttons to operate the 2 doors.
  • Page 3 ➢ Pairing RADIOEM903 Transmitter to RADIORE900 Receiver: 1. Make sure the dip switch keys inside the RADIOEM903 transmitter are set, refer to the Programming Instructions on p.1. 2. Press the LEARN button on the RADIORE900 receiver. The RED LED will BLINK.
  • Page 4 RADIOEM903 RADIOEM903 - Dip Switch Transmitter - Dip Switch Transmitter Replacement and Programming Instructions Replacement and Programming Instructions Wiring RADIORE900 Receiver for Open / Close Function Figure 1 - Wiring of RADIORE900 Receiver Operator's External Terminal Strip Figure 2 - Wiring of RADIORE900 Receiver for...

Table of Contents