Advertisement
Cut bar C to correct length.
Separate wall bracket D and E into
component parts and attach to bar C
with screws provided.
Fit support bar wall bracket E in position required with ST4*30
Substitute wall plugs J for hollow wall fixings if necessary.
1
1
E
2
2
Attach brackets D & E to bar ensuring D
is in the correct position, and fix with
screws supplied.
6mm
J
3
3
( 5)
screws provided.
K
K
4
5
4
Connect bar C to wall bracket
E with screw provided.
Attached glass clamp D to
panel with screws provided.
Check all screws are secured
correctly.
Advertisement
